Garmin Vector 1 Manual

							Balance - 10s Avg.: The 10-second moving average of the left/
right power balance.
Balance - 30s Avg.: The 30-second moving average of the left/right power balance.
Balance - 3s Avg.: The three-second moving average of the left/right power balance.
Balance - Avg.: The average left/right power balance for the current activity.
Balance - Lap: The average left/right power balance for the current lap.
Cadence: The number of revolutions of the crank arm or number of strides per minute. Your device must be connected to a cadence accessory for this data to appear.
Cadence - Avg.: The average cadence for the current activity.
Cadence - Lap: The average cadence for the current lap.
Pedal Smoothness: The measurement of how evenly a rider is applying force to the pedals throughout each pedal stroke.
Power: The current power output in watts.
Power - %FTP: The current power output as a percentage of functional threshold power.
Power - 10s Avg.: The 10-second moving average of power output.
Power - 30s Avg.: The 30-second moving average of power output.
Power - 3s Avg.: The three-second moving average of power output.
Power - Avg.: The average power output for the current activity.
Power - IF: The Intensity Factor™ for the current activity.
Power - kJ: The accumulated work performed (power output) in kilojoules.
Power - Lap: The average power output for the current lap.
Power - Lap Max.: The top power output for the current lap.
Power - Last Lap: The average power output for the last completed lap.
Power - Max.: The top power output for the current activity.
Power - NP: The Normalized Power™ for the current activity.
Power - NP Lap: The average Normalized Power for the current lap.
Power - NP Last Lap: The average Normalized Power for the last completed lap.
Power - TSS: The Training Stress Score™ for the current activity.
Power - watts/kg: The amount of power output in watts per kilogram.
Power Zone: The current range of power output (1 to 7) based on your FTP or custom settings.
Torque Effectiveness: The measurement of how efficiently a rider is pedaling.
Troubleshooting
Updating the Software Using Vector Updater
Before you can run the Vector Updater application, you must 
have a USB ANT Stick (included), an internet connection, and the pedal pods must have functioning batteries installed.
1Go to www.garmin.com/vectorowner, and download the Vector Updater application.
2Bring Vector within range (3 m) of your computer.
3Open the Vector Updater application, and follow the on-screen instructions.
Tips for Using Vector Updater
If Vector Updater is not functioning properly, you can try these tips.
•Insert the USB ANT Stick directly into a USB port on your computer. USB hubs are not recommended.
•If you are also running the ANT Agent™ application on your 
computer, you can either insert another USB ANT Stick or 
close the ANT Agent application.
•If Vector Updater cannot find your device after more than two 
minutes, remove the batteries from each pedal pod, wait 20 
seconds, and replace the batteries.
If Vector Updater still cannot find your device, you should install new batteries into each pedal pod.
Performing a Static Torque Test
NOTICE
The static torque test is intended for advanced cyclists and installation experts. This test is not required under normal circumstances to achieve good results with the Vector system. This test is available for the Edge 1000, 810, and 510 devices.
Garmin recommends performing the static torque test a 
minimum of three times and averaging the reported torque 
values.
Go to www.garmin.com/vectorowner, and click on the FAQs link for detailed instructions.
Following repeated static torque tests, if the reported torque 
value is consistently different than the expected value, you can 
enter a scale factor for one or both pedals. The scale factor is stored in the pedal and adjusts the power value that is calculated on the pedal. The scale factor is sent to the Edge device and stored on Edge device.
Upgrading Vector S to a Dual Sensor System
You can upgrade your Vector S system to a dual sensor system.
1Go to http://buy.garmin.com, or contact your Garmin dealer to purchase the upgrade pedal.
2Remove the existing right pedal.
3Determine the bicycle chain clearance (Determining the 
Bicycle Chain Clearance).
4Install the Vector components for the right pedal and pedal 
pod (Installing the Pedal Pod and Pedal).
5Pair the Vector system with your Edge device (Paring Vector 
with Your Edge 1000).
6Follow the setup and calibrations instructions for your device  (Your First Ride).
7Check for software updates (Updating the Software Using Vector Updater).
Third-Party Devices
For a list of devices that are compatible with Vector, go to www.garmin.com/vectorowner.
Appendix 7 
						

							Index
B
batterylife 5replacing 5type 5
Ccalibrating 3, 6cleaning the device 4cleats 2compatibility 7customizing the device 3, 6
D
datastoring 3transferring 3
data fields 3, 6
EEdge 2, 5, 6
GGarmin Connect 3
H
history 3sending to computer 3
Iinstalling 1, 2
Mmemory 3
Ppairing 2, 5, 6pedal pods 1, 2, 4, 5pedals 1–4power 3product registration 5
Rregistering the device 5replacement parts 4
Ssoftware, updating 7specifications 5storing data 3storing the device 4, 5
Ttools 1training 3troubleshooting 7
Uupdates, software 7USB, disconnecting 4USB ANT Stick 5, 7
Wwater resistance 5
8Index 
						

							www.garmin.com/support
+43 (0) 820 220230+ 32 2 672 52 540800 770 49601-866-429-9296+385 1 5508 272
+385 1 5508 271+420 221 985466
+420 221 985465+ 45 4810 5050+ 358 9 6937 9758+ 331 55 69 33 99+ 39 02 36 699699(+52) 001-855-792-76710800 0233937+47 815 69 55500800 4412 454
+44 2380 662 915(+35) 1214 447 460+386 4 27 92 5000861 GARMIN (427 646)
+27 (0)11 251 9999+34 93 275 44 97+ 46 7744 52020+886 2 2642-9199 ext 20808 238 0000
+44 (0) 870 8501242+49 (0)180 6 427646
20 ct./Anruf. a. d. 
deutschen Festnetz, 
Mobilfunk max. 60 ct./Anruf913-397-8200
1-800-800-1020
© 2013 Garmin Ltd. or its subsidiaries
TA-2013/403