Garmin 430w Manual

161
Flight Planning
OR
5b.  For a specified user waypoint (“User Waypoint” 
data option), the waypoint identifier field is 
highlighted. Use the small and large right 
knobs to enter the identifier of the desired user 
waypoint. Press ENT when finished. 
6.    The flashing cursor moves to the “CROSS-SIDE” 
field. Turn  the small right knob to select “To” 
or “From” and press ENT. 
7.   The flashing cursor moves to the “Initiate 
Transfer?” confirmation field. Press ENT to 
transfer the selected data....

162
Flight Planning
4.   To edit the time field, turn the large right 
knob to highlight the field. Use the small 
and large right knobs to edit the new date 
or time—entering the new value directly over 
the old figure. Press ENT when finished. 
To delete a scheduled message: 
1.   Select “Scheduler” from the flight planning 
page. 
2.   The flashing cursor highlights the first message 
field. Turn  the large right knob to highlight 
the desired message field. 
3.   Press CLR to delete the message text,...

163
Utility Page
To Enable Flight Plan Crossfill from the GTN Unit
1.  From the Default NAV Page, Active Flight Plan 
page, or the User Waypoint page press MENU.  
Highlight “GTN Crossfill?” and then press ENT.
OR
2.  On the Aux Flight Planning page scroll down 
to “Manual GTN Crossfill” with the large or 
small right knob, and then press ENT. 
3.  With the Link field highlighted, turn the small 
right knob to show “Enabled”, and then press 
ENT. This enables the GNS unit to receive flight 
plan...

164
Utility Page
The following items are available: 
Checklists— provides up to nine different user-
defined checklists containing up to 30 items each. 
Flight Timers— provides count up/down timers, 
plus automatic recording of departure time and 
total trip time. Departure and total trip time 
recording can be configured to run either any time 
400W-series power is on, or only when your ground 
speed exceeds 30 knots. 
In helicopter installations, flight timers will be only 
run if the air/ground switch...

165
Utility Page
Database Versions  —  The Database Versions 
Page displays the current Jeppesen database type, 
effective date, and expiration date, along with the 
version and type of built-in land database. 
Terrain Database Versions  —  The Terrain 
Database Versions Page displays the current terrain 
and obstacle database types, version, cycle, effective 
date, and expiration date. 
Checklists
To create a checklist: 
1.   Select “Checklist” from the utility page. Press 
ENT to display a list of...

166
Utility Page
To insert a checklist step into an existing check-
list:
1.   With the checklists page displayed, turn the 
large right knob to select the desired checklist 
and press ENT. 
2.   Turn  the large right knob to highlight the 
existing checklist entry which will immediately 
follow the new checklist step. 
3.  Turn  the small and large right knobs to 
enter the new checklist step. Press ENT when 
finished. 
To delete a checklist or all checklists: 
1.   With the checklists page displayed,...

167
Utility Page
To record or reset the departure time:
1.  Select “Flight Timers” from the utility page. 
2.  Turn  the large right knob to highlight the 
reset mode field, under “Departure Time”. (The 
reset mode field will indicate “Pwr-on” or “In 
Air”.) 
3.   Turn the small right knob to select the desired 
reset mode. (“Pwr-on” will record a departure 
time when the 400W-series unit is turned on. 
“In Air” will record a departure time once 
the GPS-computed ground speed exceeds 30 
knots.) 
4....

168
Utility Page
3.  Turn  the large right knob to select the 
desired reset option and press ENT. 
RAIM Prediction
To predict RAIM availability: 
1.   Select “RAIM Prediction” from the utility 
page. 
2.   The flashing cursor highlights the waypoint 
field. Use the small and large right knobs 
to enter the identifier of the waypoint at which 
you wish to determine RAIM availability. Press 
ENT when finished. (To determine RAIM avail-
ability for your present position, press CLR, 
followed by ENT.) 
3....

169
Utility Page
Sunrise / Sunset
To calculate sunrise and sunset times at any 
waypoint or your present position: 
1.   Select “Sunrise / Sunset” from the utility 
page. 
2.   The flashing cursor highlights the waypoint 
field. Use the small and large right knobs 
to enter the identifier of the waypoint at which 
you wish to determine sunrise and sunset 
times. Press ENT when finished. (To determine 
sunrise/sunset times for your present position, 
press CLR, followed by ENT.) 
3.   The flashing cursor...

170
Setup 1 Page
The Setup 1 page provides access to airspace 
alarms, CDI scale adjustment, an arrival alarm, units 
of measure settings, position formats, map datums and 
settings for local or UTC time display. When a setup 
item is selected, the corresponding page will appear 
providing access to the various unit settings. 
To select, highlight 
with cursor and press  ENT.Third Page 
in AUX group
To select a setup item from the setup 1 page: 
1.   Press  the small right knob momentarily, to 
activate...