Funai LT8 M40BB User Manual
Have a look at the manual Funai LT8 M40BB User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 24 Funai manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 16
17EN
Advanced Picture Adjustment
You can adjust the detailed picture settings according to your
personal preference.
1)Press [MENU] to display the menu.
2)Press [K / L] to select “Picture”, then press [OK].
3)Press [K / L] to select “Features”, then press [OK].
“Features” menu will appear.
“DNR (Digital Noise Reduction)”
You can adjust to reduce the appearance of digitizing error caused
by the compression.
4)Press [K / L] to select “DNR”.
5)Press [0 / 1] to select the setting (“Low, Mid, High”) you...](http://img.usermanuals.tech/thumb/2037/38656/w64_Funai_LT8-M40BB-15.png "Page 16
17EN
Advanced Picture Adjustment
You can adjust the detailed picture settings according to your
personal preference.
1)Press [MENU] to display the menu.
2)Press [K / L] to select “Picture”, then press [OK].
3)Press [K / L] to select “Features”, then press [OK].
“Features” menu will appear.
“DNR (Digital Noise Reduction)”
You can adjust to reduce the appearance of digitizing error caused
by the compression.
4)Press [K / L] to select “DNR”.
5)Press [0 / 1] to select the setting (“Low, Mid, High”) you...")
![Page 17
18EN
PC Settings
You can adjust the PC screen position, clock and phase. Make sure
your PC is connected.
1)Press [MENU] to display the menu.
2)Press [K / L] to select “Picture”, then press [OK].
3)Press [K / L] to select “PC Settings”, then press [OK].
“Auto Adjustment”
4)Press [K / L] to select “Auto Adjustment”, then press [OK].
Each setting will be adjusted automatically.
“H.Position, V.Position, Phase, Clock”
4)Press [K / L] to select the item you want, then press [OK].
5)Press [0 / 1] to adjust,...](http://img.usermanuals.tech/thumb/2037/38656/w64_Funai_LT8-M40BB-16.png "Page 17
18EN
PC Settings
You can adjust the PC screen position, clock and phase. Make sure
your PC is connected.
1)Press [MENU] to display the menu.
2)Press [K / L] to select “Picture”, then press [OK].
3)Press [K / L] to select “PC Settings”, then press [OK].
“Auto Adjustment”
4)Press [K / L] to select “Auto Adjustment”, then press [OK].
Each setting will be adjusted automatically.
“H.Position, V.Position, Phase, Clock”
4)Press [K / L] to select the item you want, then press [OK].
5)Press [0 / 1] to adjust,...")
![Page 18
19EN
“Auto Volume Control”
You can set to keep a constant loudness differential between the
TV commercials and the programs.
3)Press [K / L] to select “Auto Volume Control”.
4)Press [0 / 1] to select the setting (“On, Off ”) you want.
“Assistive Services”
You can adjust the audio type.
3)Press [K / L] to select “Assistive Services”.
4)Press [0 / 1] to select the setting (“-, Hearing Impaired,
Visually Impaired”) you want.
5)Press [MENU] to exit.
“Visually Impaired”
Make sure “Visually Impaired” is...](http://img.usermanuals.tech/thumb/2037/38656/w64_Funai_LT8-M40BB-17.png "Page 18
19EN
“Auto Volume Control”
You can set to keep a constant loudness differential between the
TV commercials and the programs.
3)Press [K / L] to select “Auto Volume Control”.
4)Press [0 / 1] to select the setting (“On, Off ”) you want.
“Assistive Services”
You can adjust the audio type.
3)Press [K / L] to select “Assistive Services”.
4)Press [0 / 1] to select the setting (“-, Hearing Impaired,
Visually Impaired”) you want.
5)Press [MENU] to exit.
“Visually Impaired”
Make sure “Visually Impaired” is...")
![Page 19
20EN
Audio Language Selection
You can select the main language.
1)Press [MENU] to display the menu.
2)Press [K / L] to select “TV”, then press [OK].
“Audio Language”
3)Press [K / L] to select “Audio Language”.
4)Press [0 / 1] to select the language you want.
“Audio Language 2nd”
3)Press [K / L] to select “Audio Language 2nd”.
4)Press [0 / 1] to select the language you want.
5)Press [MENU] to exit.
“Audio Channel”
3)Press [K / L] to select “Audio Channel”.
4)Press [0 / 1] to select the setting (“Dual1,...](http://img.usermanuals.tech/thumb/2037/38656/w64_Funai_LT8-M40BB-18.png "Page 19
20EN
Audio Language Selection
You can select the main language.
1)Press [MENU] to display the menu.
2)Press [K / L] to select “TV”, then press [OK].
“Audio Language”
3)Press [K / L] to select “Audio Language”.
4)Press [0 / 1] to select the language you want.
“Audio Language 2nd”
3)Press [K / L] to select “Audio Language 2nd”.
4)Press [0 / 1] to select the language you want.
5)Press [MENU] to exit.
“Audio Channel”
3)Press [K / L] to select “Audio Channel”.
4)Press [0 / 1] to select the setting (“Dual1,...")
![Page 20
21EN
Analogue Manual Scan
You can adjust an analogue channel individually.
1)Press [MENU] to display the menu.
2)Press [K / L] to select “TV”, then press [OK].
3)Press [K / L] to select “Channel”, then press [OK].
4)Press [K / L] to select “Manual Scan (Analogue)”, then press
[OK].
5)Press [the Number buttons] to enter the frequency.
To select 24, enter [0] first, then press [2] and [4].
6)Press [K / L] to select “Scan Up” or “Scan Down”, then press
[OK].
Scanning will start automatically.
When...](http://img.usermanuals.tech/thumb/2037/38656/w64_Funai_LT8-M40BB-19.png "Page 20
21EN
Analogue Manual Scan
You can adjust an analogue channel individually.
1)Press [MENU] to display the menu.
2)Press [K / L] to select “TV”, then press [OK].
3)Press [K / L] to select “Channel”, then press [OK].
4)Press [K / L] to select “Manual Scan (Analogue)”, then press
[OK].
5)Press [the Number buttons] to enter the frequency.
To select 24, enter [0] first, then press [2] and [4].
6)Press [K / L] to select “Scan Up” or “Scan Down”, then press
[OK].
Scanning will start automatically.
When...")
![Page 21
22EN
Channel Skip
When using [/], the channel you selected will be skipped.
1)Press [MENU] to display the menu.
2)Press [K / L] to select “TV”, then press [OK].
3)Press [K / L] to select “Channel”, then press [OK].
4)Press [K / L] to select “Channel Skip”, then press [OK].
“Channel List” will appear.
5)Press [K / L] to select the channel you want to skip, then
press [OK].
“ ”will appear on the right of the channel.
6)Press [MENU] to exit.
If you want to cancel
5)Press [K / L] to select the channel...](http://img.usermanuals.tech/thumb/2037/38656/w64_Funai_LT8-M40BB-20.png "Page 21
22EN
Channel Skip
When using [/], the channel you selected will be skipped.
1)Press [MENU] to display the menu.
2)Press [K / L] to select “TV”, then press [OK].
3)Press [K / L] to select “Channel”, then press [OK].
4)Press [K / L] to select “Channel Skip”, then press [OK].
“Channel List” will appear.
5)Press [K / L] to select the channel you want to skip, then
press [OK].
“ ”will appear on the right of the channel.
6)Press [MENU] to exit.
If you want to cancel
5)Press [K / L] to select the channel...")
![Page 22
23EN
Channel Edit
You can edit channel information.
1)Press [MENU] to display the menu.
2)Press [K / L] to select “TV”, then press [OK].
3)Press [K / L] to select “Channel”, then press [OK].
4)Press [K / L] to select “Channel Edit”, then press [OK].
“Channel List” will appear.
5)Press [K / L] to select the channel you want to edit, then
press [OK].
6)Press [K / L] to select your desired item.
“Channel Number”
7)Press [the Number buttons] to enter a channel number
you want, then press [OK].
“Name”...](http://img.usermanuals.tech/thumb/2037/38656/w64_Funai_LT8-M40BB-21.png "Page 22
23EN
Channel Edit
You can edit channel information.
1)Press [MENU] to display the menu.
2)Press [K / L] to select “TV”, then press [OK].
3)Press [K / L] to select “Channel”, then press [OK].
4)Press [K / L] to select “Channel Edit”, then press [OK].
“Channel List” will appear.
5)Press [K / L] to select the channel you want to edit, then
press [OK].
6)Press [K / L] to select your desired item.
“Channel Number”
7)Press [the Number buttons] to enter a channel number
you want, then press [OK].
“Name”...")
![Page 23
24EN
Fine Tune
1)Press [MENU] to display the menu.
2)Press [K / L] to select “TV”, then press [OK].
3)Press [K / L] to select “Channel”, then press [OK].
4)Press [K / L] to select “Fine Tune”, then press [OK].
“Channel List” will appear.
5)Press [K / L] to select a channel you want, then press [OK].
6)Press [0 / 1] to select a frequency you want, then press [OK].
7)Press [MENU] to exit.
Menu Language Selection
You can select the menu language.
1)Press [MENU] to display the menu.
2)Press [K / L] to...](http://img.usermanuals.tech/thumb/2037/38656/w64_Funai_LT8-M40BB-22.png "Page 23
24EN
Fine Tune
1)Press [MENU] to display the menu.
2)Press [K / L] to select “TV”, then press [OK].
3)Press [K / L] to select “Channel”, then press [OK].
4)Press [K / L] to select “Fine Tune”, then press [OK].
“Channel List” will appear.
5)Press [K / L] to select a channel you want, then press [OK].
6)Press [0 / 1] to select a frequency you want, then press [OK].
7)Press [MENU] to exit.
Menu Language Selection
You can select the menu language.
1)Press [MENU] to display the menu.
2)Press [K / L] to...")
![Page 24
25EN
Subtitle Settings
1)Press [MENU] to display the menu.
2)Press [K / L] to select “Setup”, then press [OK].
3)Press [K / L] to select “Subtitle”, then press [OK].
“Subtitle” menu will appear.
“Subtitle(Analogue)”
4)Press [K / L] to select “Subtitle(Analogue)”.
5)Press [0 / 1] to select the setting (“Muting, On, Off ”) you
want.
“Digital Subtitle Language, Digital Subtitle Language
2nd”
4)Press [K / L] to select the item you want.
5)Press [0 / 1] to select the language you want.
“Subtitle Type”...](http://img.usermanuals.tech/thumb/2037/38656/w64_Funai_LT8-M40BB-23.png "Page 24
25EN
Subtitle Settings
1)Press [MENU] to display the menu.
2)Press [K / L] to select “Setup”, then press [OK].
3)Press [K / L] to select “Subtitle”, then press [OK].
“Subtitle” menu will appear.
“Subtitle(Analogue)”
4)Press [K / L] to select “Subtitle(Analogue)”.
5)Press [0 / 1] to select the setting (“Muting, On, Off ”) you
want.
“Digital Subtitle Language, Digital Subtitle Language
2nd”
4)Press [K / L] to select the item you want.
5)Press [0 / 1] to select the language you want.
“Subtitle Type”...")
![Page 26
27EN
“Maturity Rating”
You can set the parental rating to avoid watching an inappropriate
programme for your children.
4)Press [K / L] to select “Maturity Rating”, then press [OK].
5)Press [K / L] to select “Parental Rating”.
6)Press [0 / 1] to select the age restriction.
7)Press [MENU] to exit.
“Enter PIN Code”
You can set your own password.
4)Press [K / L] to select “Enter PIN Code”, then press [OK].
5)Press [the Number buttons] to enter the new 4-digit
number.
6)Press [the Number buttons] to enter...](http://img.usermanuals.tech/thumb/2037/38656/w64_Funai_LT8-M40BB-25.png "Page 26
27EN
“Maturity Rating”
You can set the parental rating to avoid watching an inappropriate
programme for your children.
4)Press [K / L] to select “Maturity Rating”, then press [OK].
5)Press [K / L] to select “Parental Rating”.
6)Press [0 / 1] to select the age restriction.
7)Press [MENU] to exit.
“Enter PIN Code”
You can set your own password.
4)Press [K / L] to select “Enter PIN Code”, then press [OK].
5)Press [the Number buttons] to enter the new 4-digit
number.
6)Press [the Number buttons] to enter...")
22EN Channel Skip When using [/], the channel you selected will be skipped. 1)Press [MENU] to display the menu. 2)Press [K / L] to select “TV”, then press [OK]. 3)Press [K / L] to select “Channel”, then press [OK]. 4)Press [K / L] to select “Channel Skip”, then press [OK]. “Channel List” will appear. 5)Press [K / L] to select the channel you want to skip, then press [OK]. “ ”will appear on the right of the channel. 6)Press [MENU] to exit. If you want to cancel 5)Press [K / L] to select the channel set to be skipped, then press [OK]. “ ”will disappear. 6)Press [MENU] to exit. Channel Sort You can change the channel order. 1)Press [MENU] to display the menu. 2)Press [K / L] to select “TV”, then press [OK]. 3)Press [K / L] to select “Channel”, then press [OK]. 4)Press [K / L] to select “Channel Sort”, then press [OK]. “Channel List” will appear. 5)Press [K / L] to select the channel you want to move, then press [OK]. “✔” will appear on the right of the channel. 6)Press [K / L] to select the channel you want to switch, then press [OK]. The channel order will be changed. 7)Press [MENU] to exit. DTVATV BACK 18 ----- ----- 19 20 21 22 38 901 902ETV Euro CH Drama Now! WNS BCT Eurasia StationPicture Sound TV Setup ParentalDigital Digital Digital Digital Digital Digital Analogue Analogue Channel Skip Set Select Back DTVATV BACK 18 ----- ----- 19 20 21 22 38 901 902ETV Euro CH Drama Now! WNS BCT Eurasia StationPicture Sound TV Setup ParentalDigital Digital Digital Digital Digital Digital Analogue Analogue Channel Sort SetSelect Back
23EN Channel Edit You can edit channel information. 1)Press [MENU] to display the menu. 2)Press [K / L] to select “TV”, then press [OK]. 3)Press [K / L] to select “Channel”, then press [OK]. 4)Press [K / L] to select “Channel Edit”, then press [OK]. “Channel List” will appear. 5)Press [K / L] to select the channel you want to edit, then press [OK]. 6)Press [K / L] to select your desired item. “Channel Number” 7)Press [the Number buttons] to enter a channel number you want, then press [OK]. “Name” 7)Press [the Number buttons] to enter a channel name you want, then press [OK]. (Refer to the following character table.)“Frequency” 7)Press [the Number buttons] to enter a frequency you want, then press [OK]. “Colour System, Sound System” 7)Press [0 / 1] to select the setting you want. 8)Press [MENU] to exit. Channel Decode Some TV stations transmit encoded TV signals which can only be viewed with a purchased or hired decoder. You can connect such a decoder to SCART jack of the unit. This function will automatically activate the connected decoder for the channel. 1)Press [MENU] to display the menu. 2)Press [K / L] to select “TV”, then press [OK]. 3)Press [K / L] to select “Channel”, then press [OK]. 4)Press [K / L] to select “Channel Decode”, then press [OK]. “Channel List” will appear. 5)Press [K / L] to select the channel you want to allocate the decoder, then press [OK]. “ ”will appear on the right of the channel. 6)Press [MENU] to exit. If you want to cancel 5)Press [K / L] to select the channel set to decoder off. “ ”will disappear. 6)Press [MENU] to exit. DTVATV BACK 18 ----- ----- 19 20 21 22 38 901 902ETV Euro CH Drama Now! WNS BCT Eurasia StationPicture Sound TV Setup ParentalDigital Digital Digital Digital Digital Digital Analogue Analogue Channel Edit Enter Select Back BACK 802 TVE I 77.3Picture Sound TV Setup ParentalChannel Number: Name: Frequency: Colour SystemAuto Sound System D/K Channel Edit Set Select Back 1ABC1 2DE F 2 3GH I 3 4JKL4 5MN O 5 6PQR 6 7STU7 8VWX 8 9YZ9 0+- .0 ATV ATV ATV BACK ----- ----- 901 902Picture Sound TV Setup ParentalAnalogue Analogue Channel Decode Set Select Back
24EN Fine Tune 1)Press [MENU] to display the menu. 2)Press [K / L] to select “TV”, then press [OK]. 3)Press [K / L] to select “Channel”, then press [OK]. 4)Press [K / L] to select “Fine Tune”, then press [OK]. “Channel List” will appear. 5)Press [K / L] to select a channel you want, then press [OK]. 6)Press [0 / 1] to select a frequency you want, then press [OK]. 7)Press [MENU] to exit. Menu Language Selection You can select the menu language. 1)Press [MENU] to display the menu. 2)Press [K / L] to select “Setup”, then press [OK]. 3)Press [K / L] to select “Menu Language”. 4)Press [0 / 1] to select the language you want. 5)Press [MENU] to exit. Time Zone You can set the time zone according to the resident area. 1)Press [MENU] to display the menu. 2)Press [K / L] to select “Setup”, then press [OK]. 3)Press [K / L] to select “Time Setup”, then press [OK]. 4)Press [K / L] to select “Time Zone”. 5)Press [0 / 1] to select the time difference you want. 6)Press [MENU] to exit. Auto Shut Off You can set the unit to be shut down automatically if no activity is detected after the power is turned on for 4 hours. 1)Press [MENU] to display the menu. 2)Press [K / L] to select “Setup”, then press [OK]. 3)Press [K / L] to select “Time Setup”, then press [OK]. 4)Press [K / L] to select “Auto Shut Off ”. 5)Press [0 / 1] to select (“On, Off ”), then press [OK]. 6)Press [MENU] to exit. ATV BACK ----- 511.25 ----- 487.25 901 902Picture Sound TV Setup Parental Fine Tune Adjust Select Back MHz MHz BACK 902 ----- 487.25 Channel Number: Name: Frequency: Set Cancel MHz DTVATV BACK Picture Sound TV Setup ParentalMenu Language Time Setup Subtitle Teletext Common Interface Reset Select Back Setup English Auto: Automatically selects the time zone of your area to ensure the proper performance of the time. Note: Although you select “Auto”, the correct time may not be displayed on the TV Screen Information (p. 13) depending on DTV broadcasting. Clock function in this unit is not available. DTVATV BACK Picture Sound TV Setup ParentalTime Zone Auto Auto Shut OffOff Time Setup Select Back DTVATV BACK Picture Sound TV Setup ParentalTime ZoneAuto Auto Shut Off Off Time Setup Select Back
25EN Subtitle Settings 1)Press [MENU] to display the menu. 2)Press [K / L] to select “Setup”, then press [OK]. 3)Press [K / L] to select “Subtitle”, then press [OK]. “Subtitle” menu will appear. “Subtitle(Analogue)” 4)Press [K / L] to select “Subtitle(Analogue)”. 5)Press [0 / 1] to select the setting (“Muting, On, Off ”) you want. “Digital Subtitle Language, Digital Subtitle Language 2nd” 4)Press [K / L] to select the item you want. 5)Press [0 / 1] to select the language you want. “Subtitle Type” 4)Press [K / L] to select “Subtitle Type”. 5)Press [0 / 1] to select the setting (“-, Hearing Impaired”) you want. 6)Press [MENU] to exit. Teletext You can change the teletext settings. 1)Press [MENU] to display the menu. 2)Press [K / L] to select “Setup”, then press [OK]. 3)Press [K / L] to select “Teletext”, then press [OK]. “Teletext” menu will appear. “Teletext Language” 4)Press [K / L] to select “Teletext Language”. 5)Press [0 / 1] to select the language you want. “Decoding Page Language” You can adjust the decoding paging language. 4)Press [K / L] to select “Decoding Page Language”. 5)Press [0 / 1] to select the language you want. “TTX Presentation Level” You can adjust the teletext presentation level. Level 2.5 offers more colours and better graphics than Level 1.5. 4)Press [K / L] to select “TTX Presentation Level”. 5)Press [0 / 1] to select the setting (“Level 2.5, Level 1.5”) you want. 6)Press [MENU] to exit. To show the teletext 1)Press [ (text)] to turn on the teletext decoder. “Teletext” information will appear. 2)Press [ (text)] repeatedly to show the teletext in transparent mode or picture and teletext mode. 3)Press [ (text)] to turn off the teletext decoder. Note:While watching a programme, you can change the subtitle language easily using [ (subtitle)] when it is available. DTVATV BACK Picture Sound TV Setup ParentalSubtitle(Analogue) Off Digital Subtitle Language Digital Subtitle Language 2ndSubtitle Type - Subtitle Select Back English English ATV DTV DTV Note: If you want to select other pages, press [the Number buttons] or [K / L]. To enlarge fonts, press [ (expand)]. To select the teletext subpages, press [ (subpage)], then press [the Number buttons] to enter the subpage number. To directly select the page numbers shown at the bottom of the TV screen, use [RED/GREEN/ YELLOW/BLUE]. To call up the hidden information, press [ (reveal)]. To hold the current page, press [(hold)]. To go back to the start page, press [ (index)]. To hide the teletext, press [SLEEP]. DTVATV BACK Picture Sound TV Setup ParentalTeletext LanguageDecoding Page LanguageTTX Presentation Level Level 2.5 Teletext Select Back English WEST EUR
26EN C.I. (Common Interface) This unit is equipped with a C.I. slot. You can enjoy additional services with this function, for example Pay TV. The access restrictions menu will appear on the TV screen when a CI module is installed. 1)Turn off the unit and unplug from an AC outlet. 2)Insert the CI module straight to the C.I. slot of this unit. Some CI modules may be a two-piece design consisting of a card reader with the viewing card. When using this kind of card, insert the card reader firmly into the C.I. slot on the unit first. Then, insert the viewing card into the reader. 3)Plug this unit into an AC outlet and press [Q(standby-on)] to turn on the unit. 4)Press [MENU] to display the menu. 5)Press [K / L] to select “Setup”, then press [OK]. 6)Press [K / L] to select “Common Interface”, then press [OK]. 7)Follow the instructions on the TV screen. Reset Default You can restore all the settings to the default except the memorised channels and parental settings. 1)Press [MENU] to display the menu. 2)Press [K / L] to select “Setup”, then press [OK]. 3)Press [K / L] to select “Reset”, then press [OK]. Confirm message box will appear. 4)Press [0 / 1] to select [OK]. All the settings are restored to the default except the memorised channels and parental settings. 5)Press [MENU] to exit. Parental Setting You can set the maturity rating, lock the channel, or set the password. 1)Press [MENU] to display the menu. 2)Press [K / L] to select “Parental”, then press [OK]. 3)Press [the Number buttons] to enter the 4-digit number. If you have not set up your password, enter 0000. After entering the password, “Parental” menu will appear. “Channel Lock” You can set particular channels to be invisible. 4)Press [K / L] to select “Channel Lock”, then press [OK]. “Channel List” will appear. 5)Press [K / L] to select the channel you want to lock, then press [OK]. “ ”will appear on the right of the channel. 6)Press [MENU] to exit. When you select the locked channel, you need to enter the password to watch. If you want to unlock 4)Press [K / L] to select “Channel Lock”, then press [OK]. “Channel List” will appear. 5)Press [K / L] to select the channel you want to unlock, then press [OK]. “ ”will disappear. 6)Press [MENU] to exit. Note: In case of failure, you need to call your CI service provider. Menu operations may vary depending on the viewing card. Refer to the manual accompanying the viewing card. DTV Note:If you select “Reset”, all the settings (except the memorised channels) are reset to the default. DTVATV BACK Picture Sound TV Setup ParentalPIN Code Back Parental BACK 18 ----- ----- 19 20 21 22 38 901 902ETV Euro CH Drama Now! WNS BCT Eurasia StationPicture Sound TV Setup ParentalDigital Digital Digital Digital Digital Digital Analogue Analogue Channel Lock Set Select Back
27EN “Maturity Rating” You can set the parental rating to avoid watching an inappropriate programme for your children. 4)Press [K / L] to select “Maturity Rating”, then press [OK]. 5)Press [K / L] to select “Parental Rating”. 6)Press [0 / 1] to select the age restriction. 7)Press [MENU] to exit. “Enter PIN Code” You can set your own password. 4)Press [K / L] to select “Enter PIN Code”, then press [OK]. 5)Press [the Number buttons] to enter the new 4-digit number. 6)Press [the Number buttons] to enter the same 4-digit number again. 7)Press [MENU] to exit. Software Download You can update the current software when this unit detects a new version of software. 1)When this unit receives software updates automatically, the following message will appear. 2)Press [K / L] to select “Accept”, then press [1]. Updating will start automatically. 3)After the “Software Download” is completed, press [1] to restart this unit. BACK Picture Sound TV Setup ParentalParental Rating No Block Maturity Rating SelectBack BACK Picture Sound TV Setup ParentalEnter new PIN code Confirmation Enter PIN Code Back Note:This process may take up to 60 minutes. DTV 00000000 Software Download Software Version : A New Version of software is detected.Do you want to upgrade it ? Accept Remind me Later Select Next 00000000 Software Download Software Version : Software upgrades successfully! Restart the TV now? Accept Next
28EN
MAINTENANCE
Panel Cleaning
If the LCD panel should require cleaning, wipe it with a cotton
or soft cloth. Before cleaning the panel, disconnect the power
cord.
Servicing
Should your unit become inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts inside.
Turn the unit off, unplug the power cord, and take the unit to a
Service Centre for servicing.
Cabinet Cleaning
Wipe the front panel and other exterior surfaces of the unit with
a soft cloth immersed in lukewarm water and wrung dry.
Never use a solvent or alcohol. Do not spray insecticide liquid
near the unit. Such chemicals may cause damage and
discoloration to the exposed surfaces.
TROUBLESHOOTING GUIDE
Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities.
Before arranging for service, check these items. It could save you time and money.
QUICK SERVICE CHECK LIST
PROBLEM
Remote Control Doesn’t Work
Bars On TV Screen
Picture Distorted
Picture Rolls Vertically
No Colour
Poor Reception on Some Channels
Weak Picture
Lines or Streaks in Picture
Ghosts in picture
Picture Blurred
Sound OK, Picture Poor
Picture OK, Sound Poor
No Picture or Sound
Different colour marks on TV screen
Black or Luminous point on TV screen
Forget the password
POSSIBLE REMEDY
Try a new channel, if OK, then possibly due to poor channel reception. ××××××××××××
Is unit plugged in?
Power at outlet?××
Is unit’s [Q(standby-on)] on?×
Is antenna connected to terminal on the back of the unit? × × × × × ×
If outside antenna is being used, check for broken wire. ×××××××××× ×
Check for local interference. × × × × × × ×
Turn off with [Q(standby-on)] and then turn it on after about a minute. ×
Adjust “Colour” control.×
Adjust “Contrast” & “Brightness” control. × ×
Check batteries in remote control. ×
Surrounding temperature is too low. × × ×
It is quality of the LCD Panel.×
Enter the default password “4737”.×
29EN SPECIFICATIONS General SpecificationsOther Specifications Designs and specifications are subject to change without notice and without our legal obligation. DECLARATION OF CONFORMITY This product complies with the requirement of the related directives. is in compliance with the related regulations. Television system: PAL B/G TV standard PAL D/K TV standard SECAM L TV standard SECAM L TV standard SECAM B/G TV standard SECAM D/K TV standard Terminals S-Video input: Mini DIN 4pin jack x 1 Video input: RCA jack x 1 Audio input: RCA jack x 4 PC input: D-Sub 15pin x 1 (RGB) Mini jack Ø3.5 mm x 1 (AUDIO) AUDIO/VIDEO: 21pin scart jack x 2 Component Video input: RCA jack x 3 HDMI input: HDMI 19pin x 3 Headphone: Mini jack Ø3.5 mm x 1 USB input (service use only) Stereo Sound System Sound output: 10 W, 8 ohm x 2Remote control: Digital encoded infrared light system Power requirements: AC 220-240 V~, 50 Hz Power consumption: 168W (Standby: less than 1W) LCD: 40 inches Dimensions (H x W x D) (without base): 637.0 mm x 994.0 mm x 107.0 mm (with base):691.7 mm x 994.0 mm x 260.0 mmWeight (without base): 17.2 kg (with base): 19.1 kg We: declare that the following product: LCD Television Model LT8-M40BB Trade Name: FunaiFunai Electric (Polska) Sp. z o.o. ul. Inżynierska 1 Nowa Sól, 67-100 / Poland Printed in EU