Fujitsu Xa1 User Manual

							95
Connections
 Viewing Pictures on a Computer Viewing Pictures on a Computer
The supplied software can be used to copy pictures to a computer, where they can be stored, viewed, 
organized, and printed.  Before proceeding, install the software as described below.  Do 
NOT connect 
the camera to the computer until installation is complete.
 Windows: Installing MyFinePix Studio Windows: Installing MyFinePix Studio
 1  Confi rm that the computer meets the following system requirements:
Windows 8/Windows 7 (Service Pack 1) /Windows 8/Windows 7 (Service Pack 1) / Windows Vista (Service Pack 2) Windows Vista (Service Pack 2) 1 1Windows XP (Service Pack 3)Windows XP (Service Pack 3) 1 1
CPUCPU3 GHz Pentium 4 or better 3 GHz Pentium 4 or better (2.4(2.4 GHz Core 2 Duo or better GHz Core 2 Duo or better 22))2 GHz Pentium 4 or better 2 GHz Pentium 4 or better (2.4(2.4 GHz Core 2 Duo or better GHz Core 2 Duo or better 22))
RAMRAM1 GB or more1 GB or more512 MB or more (1512 MB or more (1 GB or more GB or more 22))
Free disk spaceFree disk space2 GB or more2 GB or more
GPUGPUSupports DirectX 9 or later (recommended)Supports DirectX 9 or later (recommended)Supports DirectX 7 or later (required; performance Supports DirectX 7 or later (required; performance not guaranteed with other GPUs)not guaranteed with other GPUs)
VideoVideo 1024 × 768 pixels or more with 24-bit color or better
OtherOther •  Built-in USB port recommended.  Operation is not guaranteed with other USB ports.
•  .NET Framework 3.5 Service Pack 1 required when uploading images or using Map Viewer.
•  Internet connection (broadband recommended) required to install .NET Framework (if necessary), to use 
auto update feature, and when performing such tasks as sharing pictures on-line or via e-mail.
1  Other versions of Windows are not supported.  Only pre-installed operating systems are supported; operation is not guar- anteed on home-built computers or computers that have been upgraded from earlier versions of Windows.
2  Recommended when displaying HD movies.
 2  Start the computer.  Log in to an account with administrator privileges before proceeding. 
						

							96
Viewing Pictures on a Computer
 3  Exit any applications that may be running and insert the installer CD in a CD-ROM drive.
  Windows 8/Windows 7/Windows Vista  Windows 8/Windows 7/Windows Vista
If an AutoPlay dialog is displayed, click  SETUP.EXE.  A “User Account Control” dialog will then be displayed; 
click Ye s  ( Windows 8/Windows 7) or  Allow ( Windows Vista).
 The installer will start automatically; click Install MyFinePix Studio  and follow the on-screen in-
structions to install MyFinePix Studio and RAW FILE CONVERTER.
  If the Installer Does Not Start Automatically  If the Installer Does Not Start Automatically
If the installer does not start automatically, follow the steps below.
•  Windows 8: Select  Desktop from the Start screen, then select File Explorer on the desktop taskbar and 
choose  Computer in the navigation panel. Double-click the drive containing the installer CD and follow 
the on-screen instructions.
•  Other versions of Windows: Select  Computer or My Computer from the Start menu, then double-click 
the FINEPIX CD icon to open the FINEPIX CD window and double-click  setup or SETUP.EXE.
 4 If prompted to install Windows Media Player or DirectX, follow the on-screen instructions to com-
plete installation.
 5 Remove the installer CD from the CD-ROM drive when installation is complete.  Store the installer CD in a dry location out of direct sunlight in case you need to re-install the software.
Installation is now complete.  Proceed to “Connecting the Camera” ( P 98). 
						

							97
Connections
Viewing Pictures on a Computer
 Macintosh: Installing RAW FILE CONVERTER Macintosh: Installing RAW FILE CONVERTER
RAW FILE CONVERTER is used to view RAW images on your computer.
 1  Confi rm that the computer meets the following system requirements:
CPUCPUIntel (Core 2 Duo or better)
OSOSPre-installed copies of Mac OS X version 10.6–10.8 (visit http://www.fujifilm.com/support/digital_cameras/
compatibility/ for more information).
RAMRAM
1 GB or more
Free disk spaceFree disk space A minimum of 200 MB required for installation with 400 MB available when RAW FILE CONVERTER is running
VideoVideo1,024 × 768 pixels or more with 24-bit color or better
 2 After starting the computer and quitting any applications that may be running, insert the installer 
CD in a CD-ROM drive and double-click  SILKYRFCEXInstaller.
 3 Enter an administrator name and password when prompted and click OK, then follow the on-
screen instructions to install.  Click  Exit to quit the installer when installation is complete.
 4 Remove the installer CD from the CD-ROM drive.  Note that you may be unable to remove the CD 
if Safari is running; if necessary, quit Safari before removing the CD.  Store the installer CD in a dry 
location out of direct sunlight in case you need to re-install the software.
Installation is now complete.  Proceed to “Connecting the Camera” ( P 98).
Macintosh: Importing PicturesMacintosh: Importing Pictures
Still images and movies can be imported using Image Capture or other standard Mac OS applications. 
						

							98
Viewing Pictures on a Computer
 Connecting the Camera Connecting the Camera
 1  Find a memory card containing pictures you want to copy to the computer and insert the card into the camera (P 13).
 
R Windows users may require the Windows CD when starting the software for the fi rst time.
 
Q Loss of power during transfer could result in loss of data or damage to the memory card.  Insert a fresh or 
fully-charged battery before connecting the camera.
 2  Turn the camera off   and connect a USB cable (available sepa-
rately from third-party suppliers) as shown, making sure the 
connectors are fully inserted.  Connect the camera directly to 
the computer; do not use a USB hub or keyboard.
 
Q The USB cable must be no more than 1.5 m (4.9 ft.) long and be suitable for data transfer.
 3 Turn the camera on.
 4 Upload pictures in MyFinePix Studio and follow the on-screen instructions to copy pictures to the 
computer.  To exit without copying pictures, click  Cancel.
For more information on using the supplied software, start the application and select the appropriate 
option from the Help menu. 
						

							99
Connections
Viewing Pictures on a Computer
 
Q If a memory card containing a large number of images is inserted, there may be a delay before the software 
starts and you may be unable to import or save images.  Use a memory card reader to transfer pictures.
 
Q Make sure that the computer does not display a message stating that copying is in progress and that the indi-
cator lamp is out before turning the camera off   or disconnecting the USB cable (if the number of images cop-
ied is very large, the indicator lamp may remain lit after the message has cleared from the computer display).  
Failure to observe this precaution could result in loss of data or damage to the memory card.
 
Q Disconnect the camera before inserting or removing memory cards.
 
Q In some cases, it may not be possible to access pictures saved to a network server using the supplied software 
in the same way as on a standalone computer.
 
Q The user bears all applicable fees charged by the phone company or Internet service provider when using 
services that require an Internet connection.
  Disconnecting the Camera  Disconnecting the Camera
After confi rming that the indicator lamp is out, turn the camera off    and disconnect the USB cable.
  Uninstalling the Supplied Software  Uninstalling the Supplied Software
Only uninstall the supplied software when it is no longer required or before beginning reinstallation.  After 
quitting the software and disconnecting the camera, drag “RAW FILE CONVERTER EX powered by SILKYPIX” from 
“Applications” into the Trash and select Empty Trash in the Finder menu (Macintosh), or open the control panel 
and use “Programs and Features” ( Windows 8/Windows 7/Windows Vista) or “Add or Remove Programs” ( Win-
dows XP) to uninstall MyFinePix Studio.  Under Windows, one or more confi rmation dialogs may be displayed; 
read the contents carefully before clicking OK. 
						

							100
Printing Pictures via USBPrinting Pictures via USB
If the printer supports PictBridge, the camera can be connected directly to the printer and 
pictures can be printed without fi  rst being copied to a computer.  Note that depending on the 
printer, not all the functions described below may be supported.
 Connecting the Camera Connecting the Camera
 1 Connect a USB cable (available separately from third-party suppliers) as shown and turn 
the printer on.
 
Q The USB cable must be no more than 1.5 m (4.9 ft.) 
long and be suitable for data transfer.
 2  Turn the camera on.  t  USB will be displayed 
in the monitor, followed by the PictBridge dis-
play shown below at right.
USB
00
PICTBRIDGE
TOTAL: 00000
SHEETS
SETOK FRAME
 
R Pictures can be printed from memory cards that has 
been formatted in the camera.
 
R Page size, print quality, and border selections are 
made using the printer.
Printing Selected PicturesPrinting Selected Pictures
 1 Press the selector left or right to dis-
play a picture you wish to print.
 
R To print one copy of the current picture, pro-
ceed directly to Step 3.
 2 Press the selector up or down to 
choose the number of copies (up to 
99).  Repeat steps 1–2 to select ad-
ditional pictures.
 3 Press  MENU/OK to display a confi rma-
tion dialog.
PRINT THESE FRAMES
TOTAL: 9 SHEETS
CANCELYES
 4 Press  MENU/OK to start printing. 
						

							101
Connections
Printing Pictures via USB
  Printing the Date of Recording  Printing the Date of Recording
To print the date of recording on pictures, press 
DISP/BACK in the PictBridge display and select PRINT 
WITH DATE 
s (to print pictures without the date of 
recording, select PRINT WITHOUT DATE).  To ensure 
that the date is correct, set the camera clock before 
taking pictures.  Some printers do not support date 
printing.  See the printer manual for details.
 Printing the DPOF Print Order Printing the DPOF Print Order
To print the print order created with  K PRINT 
ORDER (DPOF) in the playback menu (P 81):
 1 In the PictBridge display, press DISP/ BACK to open the PictBridge menu.
 2 Press the selector up or down to highlight u  PRINT DPOF.
PICTBRIDGE
PRINT WITH DATE 
sPRINT WITHOUT DATE PRINT DPOF
 3 Press  MENU/OK to display a confi rma-
tion dialog.
CANCELYES PRINT DPOF OK?
TOTAL: 
9 SHEETS
 4 Press  MENU/OK to start printing. 
						

							102
Printing Pictures via USB
  During Printing During Printing
The message shown at right is 
displayed during printing.  Press 
DISP/BACK to cancel before all 
pictures are printed (depending 
on the printer, printing may end 
before the current picture has 
printed).
If printing is interrupted, turn the camera off    and 
then on again.
  Disconnecting the Camera  Disconnecting the Camera
Confi  rm that the above message is not displayed and 
turn the camera off .  Disconnect the USB cable.
 Creating a DPOF Print Order Creating a DPOF Print Order
The  K PRINT ORDER (DPOF) option in the play-
back menu can be used to create a digital “print 
order” for PictBridge-compatible printers or de-
vices that support DPOF.
  DPOF DPOF
DPOF (Digital  Print Order  Format) is stan-
dard that allows pictures to be printed from 
“print orders” stored on the memory card.  
The information in the order includes the 
pictures to be printed and the number of copies of 
each picture.
CANCEL
PRINTING 
						

							103
Connections
Printing Pictures via USB
 
■ WITH DATE  s/ WITHOUT  DATE
To modify the DPOF print order, select K  PRINT 
ORDER (DPOF) in the playback menu and press 
the selector up or down to highlight WITH 
DATE  s or WITHOUT DATE.
2
PLAYBACK MENU
PHOTOBOOK ASSIST
MARK FOR UPLOAD TO
IMAGE SEARCH
PRINT ORDER (DPOF)
DISP ASPECT
WIRELESS TRANSFER
PC AUTO SAVE
Y
WITH DATE sWITHOUT DATE
RESET ALL
WITH DATE  s: Print date of recording 
on pictures.
WITHOUT DATE: Print pictures without 
date.
Press MENU/OK and follow the steps below.
 1  Press the selector left or right to dis- play a picture you wish to include in 
or remove from the print order.
 2 Press the selector up or down to choose the number of copies (up 
to 99).  To remove a picture from the 
order, press the selector down until 
the number of copies is 0.
01
PRINT ORDER  (
DPOF )
SHEETS SET
FRAMEDPOF: 00001Total number of prints
Number of copies
 3 Repeat steps 1–2 to complete the 
print order.  Press MENU/OK to save 
the print order when settings are 
complete, or DISP/BACK to exit with-
out changing the print order.
 4 The total number of prints is dis-played in the monitor.  Press MENU/
OK to exit.
The pictures in the current 
print order are indicated by a 
u icon during playback. 
						

							104
Printing Pictures via USB
 
■ RESET ALL
To cancel the current print 
order, select RESET ALL for 
K  PRINT ORDER (DPOF) .  The 
confi rmation shown at right 
will be displayed; press  MENU/OK 
to remove all pictures from the 
order.
 
R Print orders can contain a maximum of 999 pictures.
 
R If a memory card is inserted 
containing a print order cre-
ated by another camera, the 
message shown at right will 
be displayed.  Pressing MENU/OK 
cancels the print order; a new 
print order must be created as 
described above.
CANCELYES
RESET DPOF OK?
NOYES
RESET DPOF OK?