Fujitsu P50xha30 Users Manual

E-11
English
Model P50XHA30W/A
Screen size 50 wide screen:
110.6 cm (W) x 62.2 cm (H) (126.9 cm diagonal)43.5 inch (W) x 24.5 inch (H) (50 inch diagonal)
Aspect ratio 16:9 (wide)
Weight 45 kg / 99 lbs
Outer dimensions 121.4 (W) x 72.8 (H) x 9.8 (D) cm
47.8 (W) x 28.7 (H) x 3.9 (D) inch  (does not include outer projections)
Power supply 110–240 VAC 50/60 Hz
Current rating 5.2–2.1 A
Number of pixels 1366 (H) x 768 (V)
External equipment terminals
Video input terminals VIDEO1 INPUT (Video input) 1 RCA...

E-12
SPECIFICATION (Continued)
Model P42VHA30W/A P42VHA31W/A P42HHA30W/A
Screen size 42 wide screen: 42 wide screen:
92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal) 92.2 cm (W) x 52.2 cm (H) (106.0 cm diagonal)36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal)36.3 inch (W) x 20.6 inch (H) (41.7 inch diagonal)
Aspect ratio 16:9 (wide)
Weight 30 kg / 66 lbs
Outer dimensions 103.7 (W) x 64.2 (H) x 8.5 (D) cm
40.8 (W) x 25.3 (H) x 3.3 (D) inch  (does not include outer projections)
Power supply 110–240 VAC...

Before using the display, read the User’s manual (1/2) and the User’s manual (2/2) carefully so that you know how
to use the display correctly.
Refer to these manuals whenever questions or problems about operation arise. Be sure to read and observe the
safety precautions.
Keep these manuals where the user can access them readily.
*Installation and removal require special expertise.  Consult your product dealer for details.
Contents
USER’S MANUAL (2/2)
(Precautions and Adjustment Methods)
WIDE PLASMA...

E-2
SAFETY PRECAUTIONS
IMPORTANT INFORMATION
WARNING:This is a Class A and Class B product.  In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
WARNING:TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
FCC NOTICE
•A Class A digital device
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.  These...

E-3
English
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid...

E-4
RECEPTACLE
Make sure that the power cable’s grounding wire is grounded.
The display comes with a 3-prong power plug; one prong is connected to the grounding wire.  If you have only a 2-hole receptacle, you
will need to have it replaced.  Contact your dealer for more information.
•Have the display inspected and cleaned by your dealer at regular intervals.
•Pictures may become “burnt” into the screen phosphors if the screen is left on for extended periods.  To ensure that the display has a
prolonged...

E-5
English
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT
EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS
Remote
control DisplaySpeaker (optional)
Speaker
VCR or other external components See P. 
VCR 
DVD player 
Satellite tuner 
PC 
Be sure to turn OFF the power to the display and external equipment before making any connections.
No cables are supplied with the display for connection to external equipment.  The type of cable to be used varies depending on the PC
model.  Contact your dealer for more...

E-6
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)
VCR
•Connect the video signal cable to either the S-video input terminal or the video input terminal.
To video output
To video input
Bottom of Display
Note
•Unplug the power cord from the AC outlet before you connect external components.
•Also refer to the instructions for the component to be connected.
* When inputting voice see “Selecting input terminals (page E-30)”
*Terminal layout may differ and functions may not be available with some...

English
E-7
SATELLITE TUNER
•Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal.
•If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video
terminal.
DVD PLAYER
•Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal.
•If the component to be connected is equipped with component video output...

E-8
 PC
•As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase.
•The PC can be connected to either the front side or the rear side, whichever is most convenient.
To RGB output (mD-sub)
To audio outputTo RGB output (DVI-D)
To RGB1 input
(DVI-D) To audio
inputTo RGB2
input
(mD-sub)
Note
•Unplug the power cord from the AC outlet before you connect external components.
•Also refer to the instructions for the component to be...