Fujitsu P50xha30 Users Manual

Before using the display, read the User’s manual (1/2) and the User’s manual (2/2) carefully so that you know how
to use the display correctly.
Refer to these manuals whenever questions or problems about operation arise. Be sure to read and observe the
safety precautions.
Keep these manuals where the user can access them readily.
*Installation and removal require special expertise.  Consult your product dealer for details.
Contents
USER’S MANUAL (1/2)
(Specification and Part Names)
WIDE PLASMA DISPLAY...

E-2
ACCESSORIES
CHECKING ACCESSORIES
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT
Carefully check the terminals for position and type before making any connections.
Loose connectors can result in picture or color problems.  Make sure that all connectors are securely inserted into their terminals.
Ferrite cores
These ferrite cores are used to attenuate undesired signals.
Two big ferrite cores
When connecting a cable to the power input terminal, RS-232C terminal, attach one of these ferrite cores to the...

E-3
English
PART NAMES AND FUNCTIONS
‹

ƒ

„

DISPLAY SECTION – FRONT
1Power indicator lamp
This lamp shows the state of the power supply.
Lit (red): Stand-by
Lit (green): Power ON
Lit (orange): Power saving (DPMS: Power
saving function) mode ON.
(Please refer to E-30 of the Users
Manual(2/2).)
Flashing (red or green): Malfunction (Flashes differently
depending on the type of
malfunction.)
2Remote control signal receiver
Receives signals from the remote control.
3Input mode selector button 
 [MODE]...

E-4
1/I power switch
When pressed while in the “OFF” state, the power indicator lamp lights and the display is placed in the “ON 
” state, and the power
can be turned “ON” or “OFF” by the remote control or on the control panel of the display. When pressed while in the “ON ” state,
the power indicator lamp goes out and the display is placed in the “OFF” state where power is still partly supplied.
2RS-232C terminal (RS-232C)
This terminal is provided for you to control the display from the PC.  Connect it...

E-5
English
Description of Input Terminals
DVI-D terminal  (RGB1 INPUT/DVI-D)
Pin No. Input signal Pin No. Input signal
1Red 9 —
2Green 10 Ground
3Blue 11 —
4— 12—
5Ground 13 Horizontal synchronization
6Ground 14 Vertical synchronization
7Ground 15 —
8Ground Frame Ground
RGB2 input terminal (RGB2 INPUT/mD-sub)
Pin No. Signal
1DCD (Data Carrier Detect)
2RD (Received Data)
3TD (Transmit Data)
4DTR (Data Terminal ready)
5GND (Ground)
6DSR (Data Set Ready)
7RTS (Request To send)
8CTS (Clear To Send)
9RI...

E-6
INSTALLATION
To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location.
Be sure to use the optional desktop stand, ceiling-mounting unit, wall-mounting unit and other unit when installing this display.  Also, be
sure that your dealer performs the installation.
See the appropriate instruction manual for more information on the installation hardware you select.
To ensure proper heat radiation, provide at least as much space...

English
E-7
Wall-mounting Bracket 0° to 15° mounting angle P-WB6300 (for 63”/55”)
P-WB4201 (for 50”/42”)
Ceiling-mounting unit 0° to 15° mounting angle P-CT6300 (for 63”/55”) P-CT4200 (for 50”/42”)
Desktop Stand unit P-TT6300 (for 63”/55”)P-TT4200 (for 50”/42”)
Speaker P-SP6300 (for 63”/55”)P-SP5000 (for 50”)
P-SP4200 (for 42”)
(1 set of 2 speakers)
*When installing an option, make sure that all installation requirements for that option (as given in the relevant instruction  manual) are met.
*T he colors...

E-8
MAIN SUPPORTED SIGNALS
This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value
of the first input signal.
To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on the User’s manual (2/2) to adjust
the parameters.  When you finish, the settings will be automatically stored.  Thus, when the display receives that signal, pictures will be
displayed in accordance with the...

English
E-9
SPECIFICATION
Model P63XHA30W/A
Screen size 63 wide screen:
139.3 cm (W) x 78.3 cm (H) (159.8 cm diagonal)54.8 inch (W) x 30.8 inch (H) (62.9 inch diagonal)
Aspect ratio 16:9 (wide)
Weight 72 kg / 159 lbs
Outer dimensions 150.6 (W) x 89.6 (H) x 12.3 (D) cm
59.3 (W) x 35.3 (H) x 4.8 (D) inch  (does not include outer projections)
Power supply 110–240 VAC 50/60 Hz
Current rating 7.9–3.0 A
Number of pixels 1366 (H) x 768 (V)
External equipment terminals
Video input terminals VIDEO1 INPUT (Video...

E-10
SPECIFICATION (Continued)
Model P55XHA30W/A
Screen size 55 wide screen:
122.9 cm (W) x 69.1 cm (H) (140.0 cm diagonal)48.4 inch (W) x 27.2 inch (H) (55.1 inch diagonal)
Aspect ratio 16:9 (wide)
Weight 55 kg / 121 lbs
Outer dimensions 137.8 (W) x 81.0 (H) x 12.3 (D) cm
54.3 (W) x 31.9 (H) x 4.8 (D) inch  (does not include outer projections)
Power supply 110–240 VAC 50/60 Hz
Current rating 5.9–2.5 A
Number of pixels 1366 (H) x 768 (V)
External equipment terminals
Video input terminals VIDEO1 INPUT...