Fujitsu P27t 6 Ips Operating Manual
Have a look at the manual Fujitsu P27t 6 Ips Operating Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 86 Fujitsu manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Operation Displaying information Call theInformationsetting window With this function the model designation, serial number, resolution, H/V frequency, input signal, colour setting and polarity of the synchronisation signal are displayed. Fujitsu Technology Solutions 27
Notes on ergonomic colour adjustment Notes on ergonomic colour adjustment If you select colours for the monitor in your application programmes, take note of the information below. The primary colours blue and red on a dark background do not produce the minimum required contrast of 3:1 and are therefore not suitable for continuous text and data entry. When using several colours for characters and background and giving the primary colours full modulation, you can obtain very suitable colour combinations (see the following table): Characters Background black white purple bluecyan green yellow red black++- +++- white+++--- + purple++-- -- - blue- +- +- +- cyan +-- +-- - green +-- +--- yellow+- ++-- + red- +--- - + + Colour combination very suitable - Colour combination not suitable because colour hues are too close together, thin characters are not identifiable or rigorous focusing is demanded of the human eye. 28 Fujitsu Technology Solutions
Troubleshooting Troubleshooting Should an error occur,first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you cannot solve the problem, please contact our Service Desk. Having this problem? Check the following points: No screen display Power indicator does not light up►Test whether changing the 0 W switch on the rear to the 1 position cures the problem. ►Check whether the power cable on the monitor is connected correctly. ►Check whether the computer is switched on. No screen display LEDs not lit►Check whether you are using a DP or HDMI data cable and whether the 0 W switch is set to l. No screen display Powerindicatorislit►Check whether the computer is switched on. ►Check whether the data cable for the monitor is correctly attached to the monitor port on the computer. ►Press any key on the computer keyboard. The computer may be in power saving mode. ►Alter the brightness and/or contrast until you get a picture. Message:No Signal ►Check whether the data cable for the monitor is correctly attached to the monitor port on the computer. ►Check whether the computer is switched on. Message:Frequency out of range:## kHz / ## Hz Please change the display mode to 2560 x 1440 with 60 HzThe input signal (horizontal frequency and refresh rate) at the displayed input does not correspond to the technical data for the monitor. ►Adjust the video frequency range using the computer software (see documentation for the computer or display adapter). ►Set a different screen resolution using the computer software (see documentation for the computer or display adapter). Picture position not correct The monitor recognises an undefined mode (see chapterTechnicalspecification,Page32). ►Press the AUTObutton to perform auto-adjustment of the screen. Picture is shaking ►Check whether the data cable for the monitor is correctly attached to the monitor port on the computer. ►Press the AUTObutton to perform auto-adjustment of the screen. Fujitsu Technology Solutions 29
Troubleshooting Having this problem? Check the following points: Picture is wrongly adjusted ►Run theFactory Recallfunctionin the OSD menu. TheAuto Processingmessage appears. Picture disturbances (vertical lines)►Press theAUTObutton to perform auto-adjustment of the screen. Picture disturbances (horizontal lines, picture noise)►Press theAUTObutton to perform auto-adjustment of the screen. The screen becomes darker The background lighting has a limited lifetime. If your monitor display should become too dark, the background lighting will have to be replaced. ►Contact our Service Desk. For DVI connection: Despite the correct resolution of 2560 x 1440, small fonts are not sharp or are illegible and black font is shown coloured. (The information menu of the monitor shows a resolution of 1280 x 1440).►Use the DVI‑Dual Link data cable which was supplied with the monitor. 30 Fujitsu Technology Solutions
Explanatory information about standard ISO 9241-307 Explanatory information about standard ISO 9241-307 Permanently unlit or lit pixels Today’s production techniques cannot guarantee an absolutely fault-free screen display. Depending on the total number of pixels (resolution), there may be a few constantly lit or unlit pixels or subpixels. Pixel A pixel consists of 3 subpixels, normally red, green and blue. A pixel is the smallest element that can be generated by complete functionality of the display. SubpixelA subpixel is a separately addressable internal structure within a pixel that enhances the pixel function. The maximum permitted number of faulty pixels is stipulated in the international standard ISO 9241-307. In accordance with standard ISO 9241-3, LCD monitors by Fujitsu comply with Class II for low resolutions and Class I for resolutions of 1680 x 1050 (1764000 pixel) and higher. Examples: Aflat-screen monitor with a resolution of 1280 x 1024 has 1280 x 1024 = 1310720 pixels. Each pixel consists of three subpixels (red, green and blue), so there are almost 3.9 million subpixels in total. According to ISO 9241-3 (Class II), a maximum of 3 lit and 3 unlit pixels plus 7 lit or 13 unlit subpixels, or a corresponding combination, may be faulty (1 lit subpixel counts as two unlit subpixels). Aflat-screen monitor with a resolution of 2560 x 1440 has 2560 x 1440 = 3686400 pixels. Each pixel consists of three subpixels (red, green and blue), so there are almost 11.1 million subpixels in total. According to ISO 9241-3 (Class I), a maximum of 2 lit and 2 unlit pixels plus 9 lit or 18 unlit subpixels, or a corresponding combination, may be faulty (1 lit subpixel counts as two unlit subpixels). Fujitsu Technology Solutions 31
Technical specification Technical specification Condensation is not permitted, neither in the rated range of operation nor in the limit range of operation. P27T-6 IPS Dimensions and weight Visible diagonals 68.5 cm Dot pitch 0.2331 mm Width 596.7 mm Image size Height 335.7 mm Maximum resolution 2560 x 1440 Width 646 mm Height 417 mm Dimensions incl. monitor base Depth 252 mm Weight (without packaging)approx. 10.2 kg Storable display modes36 Pixel error classes according to ISO 9241-307ClassI Electrical data Analog positive, 0.7 V ss,75Ω Video Digital DP/DVI-D/HDMI with HDCP Synchronisation Separate Sync. TTL, positive or negative Horizontal frequency30 kHz .... 99 kHz (multi-scanning) Refresh rate50 Hz .... 76 Hz Maximum pixel rate VGA: 193 MHz DVI, DP: 330 MHz Power supply Switches automatically 100 V – 240 V, 50 Hz – 60 Hz Normal operation 126 W ECO operating mode85 W Total power consumption (excluding audio, USB) Power saving mode (0 W operating mode)0W Sound output 2.0 W left; 2.0 W right 32 Fujitsu Technology Solutions
Technical specification Environmental conditions Environment class 3K2, DIN IEC 721 Rated range of operation Humidity15 °C .... 35 °C 20 % .... 85 % Limit range of operation Humidity5 °C .... 35 °C 20 % .... 85 % VESA-DDC-compatible VGA interface Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the communications interface between the monitor and the computer. If the computer is equipped with a VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring optimum operation from the monitor and select the appropriate settings. Preset operating modes The picture position and size have been set to optimum values at the factory for the operating modes listed above. Depending on the display adapter used, it may be necessary to adjust the display position and size. In this case, you can change and save the settings (see chapter Changingthemonitorsettings,Page19). For ergonomic reasons, a screen resolution of 2560 x 1440 pixels is recommended. Because of thetechnology used (active matrix), an LCD monitor provides a totallyflicker-free picture, even with a refresh rate of 60 Hz. Most frequent operating modes Horizontal frequency Refresh rate Screen resolution 31.5 kHz 70 Hz 720 x 400 31.5 kHz 60 Hz 640 x 480 37.5 kHz 75 Hz 640 x 480 37.9 kHz 60 Hz 800 x 600 46.9 kHz 75 Hz 800 x 600 48.4 kHz 60 Hz 1024 x 768 55.4 kHz 60 Hz 1440 x 900 60.0 kHz 75 Hz 1024 x 768 64.0 kHz 60 Hz 1280 x 1024 65.0 kHz 60 Hz 1680 x 1050 74.0 kHz 60 Hz 1920 x 1200 (only VGA, DVI, DP) 80.0 kHz 75 Hz 1280 x 1024 88.7 kHz 60 Hz 2560 x 1440 (only DVI, DP) Fujitsu Technology Solutions 33
Technical specification Video/TV operating modes using DP and HDMI Screen resolution Refresh rateAspect ratio 720 x 480 i 60 Hz 4:3 / 16:9 720 x 480 p 60 Hz 4:3 / 16:9 720 x 576 i 50 Hz 4:3 / 16:9 720 x 576 p 50 Hz 4:3 / 16:9 1280 x 720 p 50 / 60 Hz16:9 1920 x 1080 i 50 / 60 Hz16:9 1920 x 1080 p 50 / 60 Hz16:9 SUBDport 6 10 11 1551 Pin Meaning 1 Video input red 2 Video input green 3 Video input blue 4 Ground 5 Ground 6 Video ground red 7 Video ground green 8 Video ground blue 9 +5 V (DDC) 10 Sync. ground 11 Ground 12 DDC Data 13 H. sync 14 V. sync 15 DDC Clock 34 Fujitsu Technology Solutions
Technical specification DVI-D port 91 17 Pin Meaning 1 TMDS Data2– 2 TMDS Data2+ 3 TMDS Data 2/4 Shield 4 not connected 5 not connected 6 DDC Clock 7 DDC Data 8 Analog VerticalSync 9 TMDS Data1– 10 TMDS Data1+ 11 TMDS Data 1/3 Shield 12 not connected 13 not connected 14 +5V Power 15 Earth 16 Hot Plug Detect 17 TMDS Data0– 18 TMDS Data0+ 19 TMDSData 0/5 Shield 20 notconnected 21 not connected 22 TMDS Clock Shield 23 TMDS Clock+ 24 TMDS Clock– Fujitsu Technology Solutions 35
Technical specification DisplayPort socket 1 3 19 17 15 13 11 9 7 5 2 4 20 19 16 14 12 10 8 6 Pin Meaning 1 Lane 3 (negative) 2Earth 3 Lane 3 (positive) 4 Lane 1 (positive) 5 Earth 6 Lane 1 (negative) 7 Lane 2 (positive) 8Earth 9 Lane 2 (negative) 10 Lane 0 (negative) 11 E a r t h 12 Lane 0 (positive) 13 Connected to earth 14 Connected to earth 15 Auxiliary channel (positive) 16 Earth 17 Auxiliary channel (negative) 18 Hot Plug Detect 19 Return for Power 20 Power for connector (3.3 V 500 mA) 36 Fujitsu Technology Solutions