Fujitsu P23t 6 Ips Operating Manual

Operation
Setting functions
Call up theSetupsettings window
Input select
Select the input signal
This function is used to select the input signal (VGA, DVI or DP).
This is on condition that the display adapter supports this function.
Language
Set the language for the OSD menu
With this function you select the language for the OSD menu.
The default setting is English.
DDC-CIActivates/deactivates the DDC-CI function
On= The DDC-CI function is activated (default setting)
Off = The DDC-CI function is...

Notes on ergonomic colour adjustment
Notes on ergonomic colour adju
stment
If you select colours for the monitor in your application programmes,
take note of the information below.
The primary colours blue and red on a dark background do not produce the minimum
required contrast of 3:1 and are therefore not suitable for continuous text and data entry.
When using several colours for characters and background and giving the primary colours full
modulation, you can obtain very suitable colour combinations...

Troubleshooting
Troubleshooting
Should an error occur,first check the following points. If the distortion is still not eliminated,
the monitor should, if possible, be checked on another computer.
If you cannot solve the problem, please contact our Service Desk.
Having this problem? Check the following points:
No screen display
Power indicator does not light up ►
Check whether changing the 0W switch on
the rear to setting 1 cures the problem.
► Check whether the power c able on the
monitor is connected co...

Troubleshooting
Having this problem?Check the following points:
Picture disturbances (verticallines)►
Press theAUTObutton to conduct the
auto-adjustment of the screen.
Picture disturbances (horizo ntal lines, picture
noise) ►
Press theAUTObutton to conduct the
auto-adjustment of the screen.
The screen becomes darker The background lighting has a limited lifetime.
If your monitor display should become too dark,
the background lighting will have to be replaced.
►Contact our Service Desk.
30 Fujitsu...

Explanatory information about standard ISO 9241-307
Explanatory information abou
t
standard ISO 9241-307
Permanently unlit or lit pixels
Today’s production techniques cannot guarantee an abs olutely fault-free screen display. Depending
on the total number of pixels (resolution), there may be a few constantly lit or unlit pixels or subpixels.
Pixel A pixel consists of 3 subpixels, normally red, green and blue. A pixel is
the smallest element that can be generated by complete functionality of
the display....

Technical specification
Technical speci fication
Condensation is not permitted, neither in the rated range of operation
nor in the limit range of operation.
P23T-6 IPS
Dimensions and weight
Visible diagonals 58.4 cm
Dot pitch 0.2652 mm
Width 509.2 mm
Image size
Height286,4 mm
Maximum resolution 1920 x 1080
Width 551 mm
Height 358 mm
Dimensions incl. monitor base
Depth 198 mm
Weight (with out packaging) approx. 5.7 kg
Storable display modes 40
Pixel error classes according
to ISO 9241-307 Class
I
Electrical...

Technical specification
Environmental conditions
Environment class 3K2, DIN IEC 721
Rated range of operation
Humidity 15 °C .... 35 °C
20 % .... 85 %
Limit range of operation
Humidity 5 °C .... 35 °C
20 % .... 85 %
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications
interface between the monitor and the computer. If the computer is equipped with a...

Technical specification
SUBDport
6
10
11
15 51
Pin Meaning
1 Video input red
2 Video input green
3 Video input blue
4
Ground
5
Ground
6 Video ground red
7Video ground green
8 Video ground blue
9
+5 V (DDC)
10Sync. ground
11Ground
12
DDC Data
13 H. sync
14 V. sync
15DDC Clock
34 Fujitsu Technology Solutions
 

Technical specification
DVI-D port
91
17
Pin Meaning
1
TMDS Data2–
2TMDS Data2+
3
TMDS Data 2/4 Shield
4 not connected
5not connected
6DDC Clock
7
DDC Data
8Analog Vertica lSync
9
TMDS Data1–
10TMDS Data1+
11
TMDS Data 1/ 3 Shield
12 not connec ted
13 not connected
14 +5V Power
15 Earth
16 Hot Plug Detect
17
TMDS Data0–
18TMDS Data0+
19
TMDSData 0/5 Shield
20 not connected
21 not connected
22
TMDS Clock Shield
23 TMDS Clock+
24TMDS Clock–
Fujitsu Technology Solutions 35
 

Technical specification
DisplayPort socket
13
19 17 15 13 11 9 7 5
24
20 19 16 14 12 10 8 6
Pin Meaning
1
Lane 3 (negative)
2Earth
3Lane 3 (positive)
4Lane 2 (negative)
5Earth
6
Lane 2 (positive )
7
Lane 1 (negative)
8Earth
9Lane 1 (positive)
10
Lane 0 (nega tive)
11 E a r t h
12
Lane 0 (positive)
13Connected to earth
14
Connected to earth
15
Auxiliary channel (positive)
16 Earth
17Auxiliary channel (negative)
18 Hot Plug Detect
19
Return for Power
20
Power for connector (3.3 V 500 mA)
36 Fujitsu...