Fujitsu P23t 6 Ips Operating Manual

Getting started
►Connect one of the connectors of the data cable to the D-SUB socket or the DVI-D socket or the
DP socket of the monitor and secure the plug connection by tightening the retaining screws.
If you are using a display port data cable, you must switch the 0 W switch to
the Basic setting. If you are only using a DVI or VGA data cable, you can switch
the 0 W switch to the ECO setting to activate the 0 W standby.
The monitor automatically detects the input when only one signal source is...

Operation
Operation
Switching the device on and off
123
12
1 = Switch On/Off
2 = Power supply indicator 3=0Wswitch
The colour of the LED indicator changes as follows: LED indicator Status
blue Monitor and computer are switched on (normal mode).
green
Monitor and computer are switched on (ECO mode).
orangeMonitor is not receiving a video signal or is in power saving mode.
does not light upMonitor is switched off (or is in 0W power-saving mode)....

Operation
Notes on power management
If your computer is equipped with power management (power-saving mode), the monitor can fully
support this function. Here the monitor does not distinguish between the individual energy-saving
modes of the computer (standby mode, suspend mode and OFF mode), as it is capable of
immediately switching into the mode with the highest energy-saving effect.
Stage Operation Power-saving mode (0 W switch)
Normal ECO ECO (0) BASIC (|)
Power supply
indicator Lights up blue Lit...

Operation
Changing the monitor settings
When putting the monitor into operation for thefirst time, the screen display should
be optimally adapted to the display adapter used.
Changing the monitor setti ngs with the buttons
of the control panel
The buttons of the control panel have two functions. If the OSD menu is
activated, a description of the current function of the buttons is displayed
directly above the buttons at the edge of the screen. If the OSD menu is not
activated, you can make the following...

Operation
Selecting input signal (D-SUB/DVI-D/HDMI)
►Press theINPUT/buttontocallupthe Input selectsettings window.
► Press the
ECO/or theINPUT/button to select the desired
monitor connection (VGA, DVI or DP).
► Press the
MENU/buttontocon firm your selection or theAUTO/button to cancel the process.
This setting window can also be called up when the OSD menu is locked.
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press and hold the...

Operation
Locking the ON/OFF button
The ON/OFF switch can be locked to prevent accidental or unauthorised
changes to the monitor settings.
►Press and hold the
ECO/andINPUT/buttons at the same time for a few seconds.
The message Power button loc ked / unlocked
is displayed.
Proceed in the same way to r elease the locked ON/OFF switch again.
22
Fujitsu Technology Solutions
 

Operation
Changing the monitor settings using the OSD menu
With the buttons on the control panel, you can call up and use the integrated
OSD (On-Screen Display) menu.
The English menu names are used in the following description (default setting).
►Press theMENU/button to activate the OSD menu.
The main menu appears, with icons for the setting functions.
The first symbol, ( Brightness/Contrast ), is highlighted and the associated functions
are visible in the right-hand menu field.
► Press the
ECO/or...

Operation
►Press theECO/orINPUT/button to highlight another function.
► Press the
MODE/button or the/button to change the setting.
► Press the
ECO/or theINPUT/button to highlight another function.
► Press the
MENU/button to save the change or press theAUTO/button
to exit the function without making any changes.
If you want to change other settings, select the corresponding function from the OSD
main menu . All possible adjustments of the main menu are described in the following.
OSD menu functions
The...

Operation
Adjusting the brightness and contrast
Call up theBrightness/Contrast setting window
Brightness
Set the brightness of the display
With this function you change the brightness of the background lighting.
Contrast
Set the contrast of the display
With this function you modify the contrast of bright colour tones.
Black levelSet the brightness of the display
With this function you modify the contrast of dark colour tones.
Auto BrightnessAutomatic brightness control
This function is used to automatic...

Operation
Adjusting the picture size and position
Call theImage adjust setting window
Phase
Eliminate picture disturbance
With this function youfine-tune your monitor to eliminate picture disturbance.
Clock
Set synchronisation
With this function you adjust the picture width to eliminate vertical picture
disturbances.
H-Position
Adjust the horizontal position
With this function you move the picture to the left or to the right.
V-PositionAdjust the vertical position
With this function you move the picture...