Fujitsu Myrica V40 1 User Manual

							 MYRICA V40-1 
A26361-K1070-Z120-1-M119, edition 1  English - 19 
Operation 
Controls are provided on the device and the remote control for operating the LCD TV. 
Operating elements on the device 
The operating controls of the LCD TV are located in the underside of the device. With the buttons 
you can operate the basic functions of the TV. 
  1 =  INPUT SELECT button (SOURCE) 
for selecting the video input source 
2 =  VOLUME buttons (volume) 
The VOLUME S button opens the menu for 
setting the volume. 
With the VOLUME T button you can 
change the programme in the TV mode. 3 =  ON/OFF switch for the standby mode 
4 =  Indicator 
5 =  Infrared receiver 
 
 
						

							MYRICA V40-1  
20 - English A26361-K1070-Z120-1-M119, edition 1 
Changing the device settings with the buttons of the control 
panel 
With the buttons on the control panel, you can make the following settings directly: 
Selecting picture signal source 
►  Press the INPUT SELECT button. A list of the signal sources is displayed. 
►  Choose the signal source you require using the VOLUME S/T buttons. 
►  Press the INPUT SELECT button to activate the signal source. 
Adjusting the volume 
►  Press the VOLUME S button to open the volume menu. 
►  Set the volume as required with the VOLUME S/T buttons. 
The volume menu automatically disappears again after a short time. 
Changing programme 
►  Press the VOLUME T button to prepare changing. 
►  Change to the next or previous programme in the programme list with the buttons 
VOLUME S/T. 
 
						

							 MYRICA V40-1 
A26361-K1070-Z120-1-M119, edition 1  English - 21 
Remote control 
1
23
4
56
7
89
11
13
14 12 10
15
18 16
17
19
20
  1 = POWER - switches the device on or into 
the standby mode. 
 2 = INFO - information 
You display the current settings with this 
button. 
 3 = MUTE - switches the sound on and off. 
 4 = PICTURE 
With this button you select the picture mode. 
 5 = V.SIZE 
With this button you select the picture format. 
 6 = SOURCE 
With this button you select the signal source. 
 7 = SOUND 
With this function you activate the sound 
mode. 
 8 = S.MODE - You select the audio channel 
with this button. 
 9 = STILL 
With this button you stop the displayed picture 
(still image) or switch back into the normal 
playback mode again. 
10 = DIGEST - With this button you display 
the programme overview of all channels. 
11 = Pre.PR - Changes back to the 
programme previously set 
12 = SLEEP - Sleep timer 
By pressing this button several times, you set 
the time after which the device is 
automatically switched off. 
13 = TEXT - Switches Teletext on or off 
14 = EXIT - Closes the submenu or the OSD 
menu 
15 = PR S - Changes the main display to the 
next programme in the programme list 
16 = MENU - Opens the OSD menu 
17 = VOL W - Decrease volume 
18 = VOL X - Increase volume 
19 = PR T - Changes the main display to the 
previous programme in the programme list 
20 = 0 - 9 
With this button you select the programme 
directly. 
 
 
						

							MYRICA V40-1  
22 - English A26361-K1070-Z120-1-M119, edition 1 
Teletext 
With button 13 you switch Teletext on or off. 
With the buttons 21, 23, 24 and 25 you 
navigate in the Teletext function. 
Buttons for editing programme 
list 
The detailed description of editing the 
programme list is provided under Adjusting 
programme settings. 
21 = ERASE (red) - Deletes the selected 
programme from the programme list 
23 = SKIP (green) - The marked programme 
is skipped when changing programmes with 
the buttons PR S and PR T 
24 = INSERT (yellow) - Moves programme 
see Arranging programmes 
25 = REPLACE (blue) - Exchanges 
programmes, see Arranging programmes 
 22 = FAVORITE - Switches over to the 
programme set as a favourite. 
26 = No function 
 
22
23
24 21
26
2725
29
28
33 3432
31 30 13
 
PIP (Picture in Picture) 
27 = ON/OFF - Activates the PIP mode 
28 = SOURCE 
Press this button to select the signal source 
for the PIP mode. 
29 = SIZE 
Press this button to select the picture format 
for the PIP mode. 
30 = POSITION 
Press this button to change the position of the 
PIP window. 
31 = SWAP - The displays of the main and the 
PIP window are exchanged. 
32 = PR+ - Changes to the next programme of 
the programme list in the PIP window 
33 = PR- - Changes to the previous 
programme of the programme list in the PIP 
window 
34 = POP - Main display and PIP window are 
shown in the same size next to each other 
 
						

							 MYRICA V40-1 
A26361-K1070-Z120-1-M119, edition 1  English - 23 
Changing device settings with remote control 
You can open and operate the integrated OSD (On Screen Display) menu with the remote control. 
To set the OSD menu, perform the following steps: 
►  Press the MENU button to open the OSD menu. 
►  Mark the desired menu item with the 
 /  buttons. 
►  Press the MENU button to activate a menu item. 
In the individual menus, the buttons available to you in each case are shown in the footer. 
►  Mark the option you want to change. 
►  Set the desired value or activate the desired function. 
►  Press the EXIT button to return to the main menu from a submenu or to exit the OSD menu. 
All changes are stored automatically. 
Description of menus 
i The OSD menu is available in different languages. The English menu names are used in 
the following description (default setting). 
Different menus and different options are available to you depending on the set signal 
source. The menus and options not available are not shown in the OSD menu. 
 The following main menus are available to you in the OSD menu: 
 Picture 
Here you set the picture mode, the colour temperature and the picture format. 
 Sound 
Here you set the sound of your LCD TV. 
 Setup 
Here you set the advanced settings (transparency of the OSD menu, picture in picture 
mode, child lock etc.). 
 Time 
Here you set the various time functions. 
 TV 
Here you start the automatic programme search and adjust the programme settings to 
meet your needs. 
 
						

							MYRICA V40-1  
24 - English A26361-K1070-Z120-1-M119, edition 1 
PICTURE menu - picture settings 
►  Press the MENU button to open the OSD menu. 
►  Mark the  Picture menu item with the 
 /  buttons. 
►   Press the MENU button to activate the menu item. 
The buttons available to you for setting t he options are shown in the menu footer. 
  With this function you set the picture mode. 
The contrast, brightness, colour and focus of the picture are set to opt\
imum 
values depending on the picture mode. 
Possible values: Standard, Vivid , Mild , User . 
After the  User option is selected, a further submenu appears: Mode 
Contrast  This function increases or  decreases the contrast. 
 Brightness  With this function you set the picture brighter or darker. 
 Color  With this function you set the colour saturation. 
 Sharpness  With this function you set the sharpness of the picture. 
 Recall  With this function you reset all parameters of this menu 
to the factory settings. 
Temperature  With this button you set the colour temperature. 
Possible values: Cool2, Cool1 , Normal , Warm1 , Warm2 . 
Video NR  With this function you switch the pict ure correction (Noise Reduction) on or 
off. 
Possible values:  On, Off  
Screen form  With this function you set the picture format. 
Possible values: 16:9, PANORAMA , ZOOM1 , ZOOM2 , 4:3 . 
 
						

							 MYRICA V40-1 
A26361-K1070-Z120-1-M119, edition 1  English - 25 
 
With these functions you set the position and the synchronisation of the 
picture display. 
To set the picture display, first use the Auto function and correct the picture 
display and, if necessary, then with the other functions. 
These functions are only available when PC is selected as the signal 
source. 
H Position With this function you set the horizontal picture 
position. 
V Position With this function you set the vertical picture position. 
Phase With this function you fine-tune your display to 
eliminate picture interference. 
Geometry 
(in PC mode only) 
Auto  With this function you optimally set the picture display 
automatically. 
 
SOUND menu - sound settings 
►  Press the MENU button to open the OSD menu. 
► Mark the SOUND menu item with the 
 /  buttons. 
►  Press the MENU button to activate the menu item. 
The buttons available to you for setting the options are shown in the menu footer. 
  Balance With this function you set the balance between the left and the right 
loudspeaker. 
Sound Mode With this function you activate the sound mode. 
The bass level and frequency of the sound are automatically set to 
optimum values depending on the sound mode. 
Possible values: Standard, Movie, Music, News, User. 
Spatial Effect With this function you switch the Surround sound mode on or off. 
Possible values: On, Off 
 
						

							MYRICA V40-1  
26 - English A26361-K1070-Z120-1-M119, edition 1 
 
AVC (Automatic Volume Control) 
With this function you switch the automatic volume control on or off. 
Possible values: On, Off 
INTERNAL With this function you change from the internal loudspeakers to the external 
ones and vice versa. 
Possible values: On, Off 
MTS (Multi Tone System) 
With this function you set the audio channel. 
Possible values: Mono, Stereo, Language A, Language B, Language AB 
 
 
						

							 MYRICA V40-1 
A26361-K1070-Z120-1-M119, edition 1  English - 27 
SETUP menu - advanced settings 
►  Press the MENU button to open the OSD menu. 
► Mark the Setup menu item with the 
 /  buttons. 
►  Press the MENU button to activate the menu item. 
The buttons available to you for setting the options are shown in the menu footer. 
  Translucent With this function you set the transparency of the OSD menu 
Possible values: Off, 1 - 7 
(Picture In Picture) 
With this function you switch the PIP mode on or off. 
Possible values: On, Off 
When the PIP mode is activated, the following options are available: 
Size Here you set the picture format for the PIP display. 
Resource Here you set which signal source is displayed in the 
PIP display. 
Picture Swap With this function you exchange the signal sources of 
the main display and the PIP display. 
Position Here you set the position of the PIP display. 
PIP 
A description of the PIP mode is also provided under PIP mode (Picture in 
Picture) and Selecting signal source for PIP display. 
 
						

							MYRICA V40-1  
28 - English A26361-K1070-Z120-1-M119, edition 1 
 
Here you configure the advanced settings. 
ID Here you set an ID number for service purposes. 
Possible values: 0 - 99 
Backlight With this function you set the intensity of the 
background lighting. 
Possible values: 0 -100 
Burn Clear With this function you can regenerate burned-in 
areas of the screen in some cases. 
Possible values: On, Off 
Blue Back With this function the screen background is shown in 
blue when there is no input signal. 
Possible values: On, Off 
Language With this function you set the language of the OSD 
menu. 
Possible values: English, German, French, Spanish, 
Italian, Portuguese, Dutch 
Advanced 
Setting the child lock With this function you switch the child lock on or off. 
When the child lock is activated, it is not possible to 
operate the TV with the operating buttons on the 
device. 
Possible values: On, Off