Fujitsu Myrica V40 1 User Manual

							 MYRICA V40-1 
A26361-K1070-Z120-1-M119, edition 1  English - 9 
Connections on LCD TV 
! Observe the safety precautions in the Important notes chapter in this operating manual. 
Do not cover the ventilation openings of the monitor. 
Never open the housing of the power supply unit. There is extreme danger from an 
electrical shock with the housing open. There are no components requiring cleaning or 
repairs in the interior. 
 
1236
45
789
5
11 13 1412 10
  1 =  RS-232 port 
2 =  DVI port 
3 =  AUDIO ports (LINE) 
4 =  PC-IN port (VGA) 
5 =  COMPONENT ports (2x) 
6 =  Loudspeaker ports 
7 =  SCART1 port (Half) 8 =  SCART2 port (Full) 
9 =  S-VIDEO port 
10 =  AV ports (OUT) 
11 =  AV ports (IN) 
12 =  ON/OFF switch 
13 =  Antenna port 
14 =  Power connector 
 The following devices can be connected to this LCD TV: 
 RS-232 
(black) Serial port 
For customer service, e.g. for updating the firmware 
 DVI IN 
(white) Connection for digital video input signals 
e.g. a PC with a digital output (DVI-D) or for HDTV devices 
 AUDIO IN 
white (left) 
red (right) Connection for audio input signals (LINE IN) 
e.g. for a PC or for HDTV devices 
 
						

							MYRICA V40-1  
10 - English A26361-K1070-Z120-1-M119, edition 1 
 PC IN 
(blue) Connection for analogue VGA input signals 
e.g. for a PC with an analogue output (D-SUB)  
  COMPONENT 1 
COMPONENT 2 
Y - green 
Pb - blue 
Pr - red 
 
AUDIO 
white (left) 
red (right)
 
Connections for component video and audio input signals 
e.g. for HDTV decoder, HDTV video recorder or HDTV player 
 SPEAKER 
red/right/+ 
 
black/right/- 
 
black/left/- 
 
red/left/+ Connection terminals for external loudspeakers 
 SCART 1 
(Half) Connection for AV (CVBS) and audio input signals 
e.g. for satellite receiver, DVD player, video recorder, 
decoders or a gaming console 
 SCART 2 
(Full) Connection for AV (CVBS, RGB) and audio input signals 
e.g. for satellite receiver, DVD player, video recorder, 
camcorder or a gaming console 
 
						

							 MYRICA V40-1 
A26361-K1070-Z120-1-M119, edition 1  English - 11 
 
 S-VIDEO IN  Connection for S-VIDEO input signals 
e.g. for DVD player, video recorder or film camera with S-
Video connection 
 AV: 
VIDEO 
yellow 
AUDIO 
white (left) 
red (right) Connections for video and audio input signals 
e.g. for DVD player, video recorder, film camera with S-Video 
connection or gaming console 
 TV-ANT.  antenna cable port 
 AC INPUT  Connector for the power cable  
 
						

							MYRICA V40-1  
12 - English A26361-K1070-Z120-1-M119, edition 1 
Connecting LCD TV 
Connecting antenna 
 
 
 ►  Connect an antenna cable to the antenna 
connection of the TV and to the TV antenna 
socket. 
 Connecting the power supply 
 
 
 ►  Plug the power cable supplied into the power 
connector of the LCD TV. 
You will find the power connector on the back of the 
TV. 
►  Connect the connector of the power cable 
supplied into a properly earthed mains outlet and 
ensure a secure connection. 
 
 
						

							 MYRICA V40-1 
A26361-K1070-Z120-1-M119, edition 1  English - 13 
Switching LCD TV on/off 
 
 
 ►  Press the ON/OFF switch at the left on the back of 
the TV. 
 
 
Switching LCD TV on/into standby mode 
  ►  Press the Standby button at the right on the 
underside of the TV. 
 From the indicator at the lower right on the front of the LCD TV you can recognise whether the 
device is in operation, in the standby mode or switched off. 
 Green 
Red 
Dark = 
= 
= The device is switched on. 
The device is in standby mode. 
The device is switched off. 
 
 
						

							MYRICA V40-1  
14 - English A26361-K1070-Z120-1-M119, edition 1 
Setting language of the OSD menu 
After switching on the device, set the language of the OSD (On Screen Display) menu according to 
your needs. According to the country variant, either German or English is preset as the default 
setting. If you want to use a different language, change this setting with the OSD menu. 
►  Switch the LCD TV on with the ON/OFF switch. 
►  Press the POWER button. 
►  Press the MENU button to open the OSD menu. 
► Choose the Setup menu item using the 
 button. 
►  Press the MENU button to activate the menu item. 
 
  ► Choose the Advanced menu item using the  button. 
►  Press the MENU button to activate the menu item. 
► Choose the Language menu item using the 
 button. 
►  Press the MENU button to activate the menu item. 
►  Select the language to be shown in the OSD menu with the buttons 
 / . 
►  Press the Menu button. The OSD menu will be changed over to the selected language. 
Carrying out programme search 
A programme search must be carried out to put the LCD TV into operation. Use the supplied remote 
control. 
►  Switch the LCD TV on with the ON/OFF switch. 
►  Press the POWER button. 
First the signal source must be set to the TV mode. 
►  Press the SOURCE button. 
► Choose the TV option using the 
 button. 
►  Press the MENU button to activate the menu item. 
Then you automatically start the programme search. 
►  Press the MENU button to open the OSD menu. 
► Choose the TV menu item using the 
 button. 
►  Press the MENU button to activate the menu item. 
 
						

							 MYRICA V40-1 
A26361-K1070-Z120-1-M119, edition 1  English - 15 
  ► Select the Auto Scan menu item using the  button. 
►  Press the MENU button to activate the menu item. 
►  Select your country with the 
 button. 
►  Press the MENU button to start the programme search. 
Wait until the programme search is completed. Then the device shows the first programme found. 
 
i The programmes will be entered in the programme list in the order in which they are found. 
However, you can change the order of the programmes later (see Arranging 
programmes). 
Adjusting programme settings 
After the programme search, you can change various programme settings later, e.g. the order of the 
programmes in the programme list, the programme names or the frequency of a channel. The 
following sections contain a description of how to change the settings. 
►  Press the MENU button to open the OSD menu. 
► Choose the TV menu item using the 
 button. 
►  Press the MENU button to activate the menu item. 
► Choose the Edit menu item using the 
 button. 
►  Press the MENU button to activate the menu item. 
  The programme list will be displayed with the first 8 programmes found. If a programme name was 
detected during the programme search, it will be displayed. 
 
						

							MYRICA V40-1  
16 - English A26361-K1070-Z120-1-M119, edition 1 
Arranging programmes 
With the OSD menu you can rearrange the order of the programmes according to your personal 
preferences. 
Moving programme 
►  Select the programme you want to move with the buttons 
 / . 
►  Press the INSERT button (yellow) to mark the programme to be moved. 
►  Select the position at which you want to insert the programme with the buttons 
 / . 
►  Press the INSERT button (yellow). The programme will be inserted at the selected position. 
Swapping position of two programmes 
►  Select the programme you want to move with the buttons 
 / . 
►  Press the REPLACE button (blue) to mark the programme to be swapped. 
►  Mark the programme with which the programme is to be swapped with the buttons 
 / . 
►  Press the REPLACE button (blue). The selected programmes swap their positions. 
Changing programme properties 
You can change the following properties of a programme: 
●  Change the programme name displayed in the programme list 
●  Set the channel of a programme 
●  Select or automatically assign a different TV standard 
●  Select the sound standard 
●  Hide a programme in the programme list 
●  Select a programme as a favourite 
 
i All changes are stored automatically. 
Changing programme name 
Five characters are available for the programme name. 
►  Select the programme for which you want to set the name with the buttons 
 / . 
►  Mark the position for the character you want to change under Name with the buttons 
 / . 
►  Select the desired character at this position with the buttons 
 / . 
Repeat this procedure until you have entered the desired programme name. 
 
						

							 MYRICA V40-1 
A26361-K1070-Z120-1-M119, edition 1  English - 17 
Setting channel of a programme 
This function is used when a programme is transmitted on a new station frequency. 
►  Select the programme for which you want to set another channel with the buttons 
 / . 
►  Mark the property CH with the buttons 
 / . 
►  Select the desired channel with the 
 /  buttons. 
Selecting TV standard 
►  Select the programme for which you want to set the TV standard with the buttons 
 / . 
►  Mark the property Picture with the buttons 
 / . 
►  Select the desired TV standard with the buttons 
 /  or assign the suitable TV standard 
(Pal, Secam, Auto) automatically. 
Selecting sound standard 
►  Select the programme for which you want to set the sound standard with the buttons 
 / . 
►  Mark the property Sound with the buttons 
 / . 
►  Select the desired sound standard (B/G, D/H, L, I, Auto) with the buttons 
 / . 
Hiding programme in programme list 
If you want to hide a programme in the programme list (SKIP=Yes), the programme is skipped when 
you change the programmes with the buttons 
 / . 
►  Select the programme you want to hide in the programme list with the buttons 
 / . 
►  Press the SKIP button (green). The selected programme is hidden in the programme list. 
Selecting programme as favourite 
In the TV mode it is possible to change directly to programmes marked as favourites by pressing the 
FAVORITE button. 
►  Select the program you want to select as a favourite with the buttons 
 / . 
►  Mark the property FAV with the buttons 
 / . 
►  Select the value Yes with the buttons 
 / . 
 
						

							MYRICA V40-1  
18 - English A26361-K1070-Z120-1-M119, edition 1 
Deleting program 
►  Select the programme you want to delete with the buttons  / . 
►  Press the ERASE button (red). The selected programme is deleted from the programme list. 
Selecting signal source 
Selecting signal source for main display 
►  Press the SOURCE button in the upper section of the remote control. 
►  Choose the signal source you require using the 
 button. 
►  Press the MENU button to activate your selection. 
Selecting signal source for PIP display 
►  Press the ON/OFF button to activate the PIP mode. 
►  Press the SOURCE button in the lower section of the remote control (in the PIP field). 
►  Choose the signal source you require using the 
 button. 
►  Press the MENU button to activate your selection. 
Changing programme 
► Press the  button to change to the next programme in the programme list. 
► Press the 
 button to change to the previous programme in the programme list.