Fujitsu Myrica Pq50 1 Operating Manual

Operator control
15ENGLISH
OSD menu control
The performance of settings in the OSD menu is
described in detail below.
SPress [MENU] to display the main menu on screen.
SWith the button [Y]or[B] select a menu option and
press the button [
].
SRepeat this procedure until the desired menu
option is reached.
Selected menu options are marked with a blue bar.
Menu options with a further submenu or that can be
executed directly are marked by
.
SWith the buttons [A]/[] select the desired option
or a parameter...

Operator control
16ENGLISH
Manual station search
SPress the [MENU] button to open the main menu.
SWith the button [Y]or[B] select the  menu
and press the button [
].
SSelect  with the button [Y]or[B] and press
the button [
].
SSelect the menu option  [Y]/[B]
and press the button [
].
SSelect  [Y]/[B].
Choose a programme number between 0 and 99
[
A]/[].
SSelect  [Y]/[B].
You can select between two possibilities:
Channel and special channel [
A]/[].
SSelect  [Y]/[B].
Enter a channel number [0...9] or [...

Operator control
17ENGLISH
Setting the decoder
You can use the SCART1 or SCART2 input to connect
a decoder for coded TV channels (pay TV).
SSelect  [Y]/[B].
You have the following selection options:
DecoderTV channelDecoderSoundPicture
NormalUncodedUncoded
Decoder A SCART1UncodedCoded
Decoder B SCART1CodedCoded
Decoder A SCART2UncodedCoded
Decoder B SCART2CodedCoded
Editing the channel overview
It is described below how you can change the sequence of stored TV channels or delete them from the channel...

Operator control
18ENGLISH
OSD settings
SPress the [MENU] button to open the main menu.
SWith the button [Y]or[B] select the  menu
and press the button [
].
SSelect  with the button [Y]or[B] and press
the button [
].
Time Out
Under the menu option  you can alter the
display duration (time after last actuation up to mask
out) of the OSD menu.
SSelect  [Y]/[B].
SYou can select one of the following possibilities:
OFF; 5, 10, 15, 20, 25, and 30 seconds [
A]/[].
Transparency
The function  offers the...

Operator control
19ENGLISH
Picture settings
After first installation or after resetting to the ex-factory settings the values in the menu  are set to the defaults. You can
individually change these values as described below, depending on your personal preference, the location of the LCD/plasma
TV and the light incidence associated with the location.
For AV sources(TV, CVBS, YC, YUV, SCART1, SCART2, HDMI)
SPress the [MENU] button to open the main menu.
SWith the button [Y]or[B] select the  menu
and press...

Operator control
20ENGLISH
For PC sources(RGB, DVI)
SPress the [MENU] button to open the main menu.
SWith the button [Y]or[B] select the  menu
and press the button [
].
Contrast
SSelect  [Y]/[B].
SPress the button [] and the contrast is
increased.
SPress the button [A] and the contrast is reduced.
Brightness
SSelect  [Y]/[B].
SPress button [] and the picture becomes brigh-
ter.
SPress button [A] and the picture becomes darker.
Sharpness
SSelect  [Y]/[B].
SPress button [] and the picture becomes
sharper....

Operator control
21ENGLISH
Picture formats for AV sources
SPress the [MENU] button to open the main menu.
SWith the button [Y]or[B] select the 
menu and press the button [
].
SSelect the desired picture format [A]/[].
The selected picture format appears on screen.
STo change between formats you can also repea-
tedly press the [FORMAT] button on the remote
control.
Auto zoom
This function evaluates the current picture format and
switches automatically between 4:3 and 16:9.
Fill all
In this format setting...

Operator control
22ENGLISH
Picture formats for PC sources
SPress the [MENU] button to open the main menu.
SWith the button [Y]or[B] select the 
menu and press the button [
].
SSelect the desired picture format [A]/[].
Normal
Displays the PC picture as a full screen picture, without
changing the side ratio.
Dark stripes are visible on the left and right-hand
edges of the picture depending on the input format of
the PC picture.
Fill all
In this format setting the picture is adapted in horizontal
and...

Operator control
23ENGLISH
Volume Line Out
Volume level at the output LINE OUT L/R.
SSelect the desired volume level
[
A]/[].
Max Startup Volume
Volume when the set is switched on.
SSelect the desired volume level
[
A]/[].
AVC (Automatic Voice Control)
This function ensures a uniform volume when you
switch over from one TV channel to another.
SPDIF input (input for digital audio signals)
You can connect the digital audio input with a picture
signal from an AV or PC source here.
User Equalizer
For an...

Operator control
24ENGLISH
Video text
The LCD/plasma TV can receive and display TOP/FLOF teletext information.
DSelect a TV channel with teletext.
SPress the button [TEXT] on the remote control
to display the teletext. By pressing the [TEXT] but-
ton several times you can display the teletext and
the current television channel at the same tine next
to each other (split screen) or quit teletext mode
again.
Press the [TV] button to return to TV mode.
Page selection
DFor direct selection of teletext pages...