Fujitsu Lpf-D711 Users Manual

E-51
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês

E-52
OTHER ADJUSTMENTS (Continued)
• Displaying System Status (Information)
Displays system operation status.
Select “Information” and press 

E-53
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês

E-54
CLEANING AND MAINTENANCE
• If the ventilation holes become blocked, the temperature inside the projector rises and the lamp will fail to light. Clean the ventilation 
holes about once every 6 months. Cleaning will be required more frequently if used in a particularly dusty environment.
• When the air filter of the ventilation hole becomes hard to clean, it is ready to be changed. Purchase a new air filter (with the filter 
holder).
• Do not use the projector with the filter holder detached, as dust...

E-55
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês

E-56
CLEANING AND MAINTENANCE (Continued)
• Lamp life differs according to the lamp and the environment it is used in. The lamp may explode immediately after starting use.
• When the lamp reaches the end of its service life, the image becomes dark and the colors lose their vividness. When this happens, change 
the lamp unit.
• Replace with a new lamp unit when the replace lamp message appears. The old lamp may explode if it continues to be used.
• After removing the old lamp unit, handle with care to...

E-57
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês

E-58
CLEANING AND MAINTENANCE (Continued)
Precautions
Be sure to remove the power plug from the receptacle before cleaning the display.
Be sure not to clean the display using a cloth dampened with volatile solvents, such as benzene or thinner.  Such solvents can harm the 
display’s cabinet, the filter at the screen front, and the remote control.  They can also cause paint to come off these sections.
Cleaning the Screen
Clean the screen gently with a soft cloth.
The screen surface is fragile.  Never...

E-59
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês

E-60
MAIN SUPPORTED SIGNALS
This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value of 
the first input signal. 
To do this, select a desired signal and follow the instructions in "Adjusting Screen Position and Size" on P. E-46 to adjust the parameters. 
When you finish, the settings will be automatically stored.  Thus, when the display receives that signal, pictures will be displayed in 
accordance with the...