Home > Fujitsu > Projector > Fujitsu Lpf-D711 Users Manual

Fujitsu Lpf-D711 Users Manual

Here you can view all the pages of manual Fujitsu Lpf-D711 Users Manual. The Fujitsu manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 11

E-11
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês

Page 12

E-12
PART NAMES AND FUNCTIONS
PROJECTOR SECTION - FRONT
Remote control signal receiver
Receives signals from the remote control.
Projector lens
Adjuster (for front end)
Adjusts the height of projector.
PROJECTOR SECTION - REAR
Display input (PICTURE) terminal (DISPLAY INPUT)
Connect this terminal to the display output (PICTURE) terminal on 
the AV selector using the special cable provided.
d/l power switch
If this switch is pressed when the power indicator lamp is off, the 
indicator lamp will...

Page 13

E-13
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês

Page 14

E-14
PART NAMES AND FUNCTIONS (Continued)
Power indicator lamp 
This lamp shows the state of the power supply. 
Lit (red): Stand-by 
Lit (green): Power ON 
Flashing (red or green): Malfunction (Flashes differently depending on the type of malfunction.) 
Remote control signal receiver 
Receives signals from the remote control. 

 /l power switch 
If this button is pressed with the power indication lamp off, it lights up.
The power can be turned on and the standby mode is selected by using the remote...

Page 15

E-15
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês

Page 16

E-16
PART NAMES AND FUNCTIONS (Continued)
HDMI (High-Definition Multimedia Interface)
HDMI is a standard for home digital interfaces, which can transmit images as well as multichannel 
audio signals and control signals through one cable.
DESCRIPTION OF INPUT TERMINALS 
DVI-D terminal (RGB1 INPUT/DVI-D) 
(HDCP incompatible)Pin No. Signal Pin No. Signal Pin No. Signal
1 T.M.D.S. Data2– 9 T.M.D.S. Data1– 17 T.M.D.S. Data0–
2 T.M.D.S. Data2+ 10 T.M.D.S. Data1+ 18 T.M.D.S. Data0+
3
T.M.D.S. Data2...

Page 17

E-17
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês

Page 18

E-18
USING THE REMOTE CONTROL
To prevent malfunction, be sure not to apply any form of severe shock to the remote control.
To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or 
heating equipment.
Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner.
PUTTING BATTERIES IN THE REMOTE CONTROL
(1) To remove the cover, slide it outwards 
while pressing it down.(2)...

Page 19

E-19
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês

Page 20

E-20
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT
Be sure to turn OFF the power to the display and external equipment before making any connections. 
No cables are supplied with the display for connection to external equipment.  The type of cable to be used varies depending on the PC 
model. Contact your dealer for more information. 
Carefully check the terminals for position and type before making any connections.
Loose connectors can result in picture or color problems.  Make sure that all connectors...
Start reading Fujitsu Lpf-D711 Users Manual

Related Manuals for Fujitsu Lpf-D711 Users Manual

All Fujitsu manuals