Fujitsu Fujifilm X S1 Instruction Manual

47
More on Photography
Focus Mode
 b Manual Focus
•  Use of a tripod is recommended.  Focus may be affected if the camera moves.
• Use the I FOCUS RING  option in the setup menu ( P 104) to reverse the direction of rotation for the focus ring.
•  The camera may not focus if the focus ring is over-rotated.  Rotate the focus ring in the opposite direction to  restore focus.
•  To focus using autofocus, press the  AE/AF LOCK button.  This can be used to quickly focus 
on a chosen subject in manual focus...

48
 Focus Frame Selection
When t AREA  is selected for F  AF MODE in 
the shooting menu and AF-S  is selected for focus 
mode, focus position can be changed.  Press  AF 
button and then press the selector up, down, left 
or right (the focus frame can be returned to the 
center by pressing MENU/OK ).  The setting takes ef-
fect when you press the  AF button again.
Focus frame
Focus point
When framing a picture in the LCD monitor, you 
can choose the size of the focus frame for AF-S .  
Press the AF...

49
More on Photography
 Sensitivity
The camera’s sensitivity to light can be adjusted by pressing the ISO button 
and then rotating the command dial until the desired value is highlighted 
in the display.
 ISO
Higher values can reduce blur; note, however, that mottli ng may appear in pictures taken at high sensitivities.
10 0ISO12 8 0 0
Bright
SceneDark
Less noticeableNoise (mottling)More noticeable
OptionOptionDescriptionDescription
AUTO Sensitivity is adjusted automatically in response to shooting...

50
 White  Balance
For natural colors, press the WB button and choose a setting that matches 
the light source.
OptionOptionDescriptionDescription
AUTO White balance adjusted automatically.
h Measure a value for white balance.
k Selecting this option displays a list of color temperatures ( P 51); highlight a temperature and press MENU/OK.
i For subjects in direct sunlight.
j For subjects in the shade.
k Use under “daylight” fluorescent lights.
l Use under “warm white” fluorescent lights.
m Use under...

51
More on Photography
White Balance
a
•  White balance is adjusted for flash lighting only in AUTO mode.  Turn the flash off when using other white balance 
options.
•  Results vary with shooting conditions.  Play pictures back after shooting to check colors in the LCD monitor.
   k : Color Temperature
Color temperature is an objective measure of the color of a light source, expressed in Kelvin (K).  Light sources 
with a color temperature close to that of direct sunlight  appear white; light sources...

52
 The Fn Button
The role played by the Fn1/Fn2  button can be selected using the  F Fn 
BUTTON  option in the setup menu ( P 102).
The following options are available: 
IMAGE SIZE  (P  84)/ IMAGE QUALITY  (P  84)/ DYNAMIC RANGE  (P  85)/ FILM SIMULATION  
( P  85)/ AF MODE ( P 87)/ FACE DETECTION  (P  86)/ FACE RECOGNITION  (P  87)/ INTELLIGENT 
DIGITAL ZOOM  (P 86)/Focus Check ( P 47).
Fn1 button
Fn2  button
a
The  F Fn BUT TON  menu can also be displayed by pressing and holding the Fn1 /Fn2  button. 

53
More on Photography
 b Intelligent Face Detection
Intelligent Face Detection allows the camera to automatically detect human faces and set focus and 
exposure for a face anywhere in the frame for shots that emphasize portrait subjects.  Choose for group 
portraits (in horizontal or vertical orientations) to prevent the camera from focusing on the background.
Green border
To use Intelligent Face Detec-
tion, press MENU/OK to display 
the shooting menu and se-
lect ON  for b FACE DE TEC-
TION .  Faces...

54
 n Face Recognition
The camera can store information on the face 
and personal details (name, relationship, and 
birth date) of portrait subjects and assign these 
subjects priority for Intelligent Face Detection or 
display their names and other information during 
playback.
 Adding New Faces Adding New Faces
Follow the steps below to add faces to the face 
recognition database.
 1 Select REGISTER .
Select  REGISTER  for n FACE R ECOG NI -
TION  in the shooting menu.
a
To disable face recognition,...

55
More on Photography
n Face Recognition
Viewing, Editing, and Deleting Existing DataViewing, Editing, and Deleting Existing Data
Follow the steps below to view, edit, or delete 
face recognition data.
 1 Select VIEW & EDIT  for n FACE R ECOG -
NITION .
 2  Select a face.
 3  View or edit face recognition data.
The name, category, or birth date can be ed-
ited as described in Step 3 of “Adding New 
Faces” ( P 5 4).  To  re t a ke  t h e  p h oto,  s e l e c t   RE-
PLACING IMAGE  and shoot a new...

56
The camera can take RAW pictures.  RAW pictures 
are unprocessed data read from the image sensor. 
To take RAW pictures, select j RAW  in the setup 
menu ( P 10 4).
Choose  RAW+JPEG  or RAW to record RAW pic-
tures.  If RAW+JPEG  is selected, JPEG copies will 
also be recorded.  Choose OFF  to record pictures 
in JPEG format only.
a
• To convert RAW files for display on the camera, use  j RAW CONVERSION  i n  t h e  p l a y b a c k  m e n u  (P 92).
• To convert RAW files for display on a computer,...