Fujitsu Fuji Xpro1 Owners Manual

85
Connections
Printing Pictures via USBPrinting Pictures via USB
If the printer supports PictBridge, the camera can be connected directly to the printer and 
pictures can be printed without fi  rst being copied to a computer.  Note that depending on the 
printer, not all the functions described below may be supported.
 Connecting the Camera Connecting the Camera
 1  Connect the supplied USB cable as shown and turn the printer on.
 2  Turn the camera on.  t  USB will be displayed 
in the monitor,...

86
Printing Pictures via USB
  Printing the Date of Recording  Printing the Date of Recording
To print the date of recording on pictures, press 
DISP/BACK in the PictBridge display and select PRINT 
WITH DATE 
s (to print pictures without the date of 
recording, select PRINT WITHOUT DATE). To ensure 
that the date is correct, set the camera clock before 
taking pictures.  Some printers do not support date 
printing.  See the printer manual for details.
 Printing the DPOF Print Order Printing the DPOF...

87
Connections
Printing Pictures via USB
  During Printing During Printing
The message shown at right is 
displayed during printing.  Press 
DISP/BACK to cancel before all 
pictures are printed (depending 
on the printer, printing may end 
before the current picture has 
printed).
If printing is interrupted, turn the camera off    and 
then on again.
  Disconnecting the Camera  Disconnecting the Camera
Confi  rm that the above message is not displayed and 
turn the camera off .  Disconnect the USB...

88
Printing Pictures via USB
 
■ WITH DATE s/ WITHOUT  DATE
To modify the DPOF print order, select K  PRINT 
ORDER (DPOF) in the playback menu and press 
the selector up or down to highlight WITH 
DATE  s or WITHOUT DATE.
PLAYBACK MENU
DISP ASPECT
PLAYBACK VOLUME
PRINT ORDER 
(
DPOF )
PHOTOBOOK ASSIST
MARK FOR UPLOAD TO
IMAGE SEARCH SLIDE SHOW
WITHOUT DATE
RESET ALL WITH DATE s
WITH DATE s : Print date of recording 
on pictures.
WITHOUT DATE: Print pictures without 
date.
Press MENU/OK and follow the...

89
Connections
Printing Pictures via USB
 
■ RESET ALL
To cancel the current print 
order, select RESET ALL for 
K  PRINT ORDER (DPOF) .  The 
confi rmation shown at right 
will be displayed; press  MENU/OK 
to remove all pictures from the 
order.
 
R Print orders can contain a maximum of 999 pictures.
 
R If a memory card is inserted 
containing a print order cre-
ated by another camera, the 
message shown at right will 
be displayed.  Pressing MENU/OK 
cancels the print order; a new 
print order must...

90
 Viewing Pictures on a Computer Viewing Pictures on a Computer
The supplied software can be used to copy pictures to a computer, where they can be stored, viewed, 
organized, and printed.  Before proceeding, install the software as described below.  Do 
NOT connect 
the camera to the computer until installation is complete.
 Windows: Installing MyFinePix Studio Windows: Installing MyFinePix Studio
 1  Confi rm that the computer meets the following system requirements:
Windows 7 (Service Pack...

91
Connections
Viewing Pictures on a Computer
 3  Exit any applications that may be running and insert the installer CD in a CD-ROM drive.
  Windows 7/Windows Vista Windows 7/Windows Vista
If an AutoPlay dialog is displayed, click  SETUP.EXE.  A “User Account Control” dialog will then be displayed; 
click Ye s  ( Windows 7) or  Allow ( Windows Vista).
 The installer will start automatically; click Install MyFinePix Studio  and follow the on-screen in-
structions to install MyFinePix Studio and RAW FILE...

92
Viewing Pictures on a Computer
 Macintosh: Installing FinePixViewer Macintosh: Installing FinePixViewer
 1  Confi rm that the computer meets the following system requirements:
CPUCPUPowerPC or Intel (Core 2 Duo or better)
OSOSPre-installed copies of Mac OS X version 10.3.9–10.6 (visit http://www.fujifilm.com/support/digital_cameras/
compatibility/ for more information).  Mac OS X version 10.7 and later not supported.
RAMRAM
256 MB or more (1 GB or more recommended when displaying HD movies)
Free disk...

93
Connections
Viewing Pictures on a Computer
 5 Mac OS X 10.5 or earlier: Open the “Applications” folder, start Image Capture, and select Preferences… 
from the Image Capture application menu.  The Image Capture preferences dialog will be displayed; 
choose  Other… in the  When a camera is connected, open  menu, then select FPVBridge in the 
“Applications/FinePixViewer” folder and click Open.  Quit Image Capture.
Mac OS X 10.6 : Connect the camera and turn it on.  Open the “Applications” folder and...

94
Viewing Pictures on a Computer
 Connecting the Camera Connecting the Camera
 1  Find a memory card containing pictures you want to copy to the computer and insert the card into the camera (P 14).
 
R Windows users may require the Windows CD when starting the software for the fi rst time.
 
Q Loss of power during transfer could result in loss of data or damage to the memory card.  Insert a fresh or 
fully-charged battery before connecting the camera.
 2 Turn the camera off  and connect the supplied USB...