Fujitsu Fuji Xa2 Instruction Manual

105
Connections
Printing Pictures via USB
 Creating a DPOF Print Order Creating a DPOF Print Order
The K PRINT ORDER (DPOF) option in the play-
back menu can be used to create a digital “print 
order” for PictBridge-compatible printers or de-
vices that support DPOF.
  DPOF DPOF
DPOF (Digital  Print Order  Format) is stan-
dard that allows pictures to be printed from 
“print orders” stored on the memory card.  
The information in the order includes the 
pictures to be printed and the number of copies of...

106
Printing Pictures via USB
 3 Repeat steps 1–2 to complete the print order.  Press MENU/OK to save 
the print order when settings are 
complete, or DISP/BACK to exit with-
out changing the print order.
 4 The total number of prints is dis- played in the monitor.  Press MENU/OK 
to exit.
The pictures in the current 
print order are indicated by a 
u icon during playback.
 
■ RESET ALL
To cancel the current print 
order, select RESET ALL for 
K  PRINT ORDER (DPOF) .  The 
confi rmation shown at right...

107
Connections
 instax SHARE Printers instax SHARE Printers
Print pictures from your digital camera to instax SHARE printers.
Establishing a ConnectionEstablishing a Connection
Select instax PRINTER CONNECTION SETTING  in the camera setup menu and enter the instax SHARE 
printer name (SSID) and password.
  The Printer Name (SSID) and Password  The Printer Name (SSID) and Password
The printer name (SSID) can be found on the bottom of the printer; the default 
password is “1111”.  If you have already...

108
instax SHARE Printers
Printing PicturesPrinting Pictures
 1  Turn the printer on.
 2 Select instax PRINTER PRINT in the camera 
playback menu.  The camera will connect to 
the printer.
FUJIFILM-CAMERA-1234 CONNECTING TO PRINTER
CANCEL PRINTER PRINT
instax-12345678
 
R To print a frame from a burst sequence, display 
the frame before selecting instax PRINTER 
PRINT.
 3 Use the selector to display the picture you 
want to print, then press MENU/OK.
100-0020100-0020
instax-12345678 PRINTER PRINTTRANSMIT...

109
Connections
 Viewing Pictures on TV Viewing Pictures on TV
To show pictures to a group, connect the camera to a TV using an HDMI cable (available separately 
from third-party suppliers; note that the TV can only be used for playback, not shooting).
 1  Turn the camera off .
 2  Connect the cable as shown below.
Insert into HDMI mini connectorInsert into HDMI connector
 
Q Use an HDMI cable no more than 1.5 m (4.9 ft.) long.
 
R Be sure the connectors are fully inserted.
 3 Tune the television to the...

110
Technical NotesTechnical Notes
 Optional Accessories Optional  Accessories
The camera supports a wide range of accessories from FUJIFILM and other manufacturers.
 Accessories from FUJIFILM Accessories from FUJIFILM
The following optional accessories are available from FUJIFILM.  For the latest information on the accesso-
ries available in your region, check with your local FUJIFILM representative or visit http://www.fujifilm.com/
products/digital_cameras/index.html.
Rechargeable Li-ion...

111
Technical Notes
Optional Accessories
 Shoe-mounted fl  ash units Shoe-mounted fl  ash unitsEF-20: This clip-on fl ash unit (powered by 
two AA batteries) has a Guide Number 
of 20/65 (ISO 100, m/ft.) and supports 
TTL fl ash control.  The fl ash head can be 
rotated upwards 90° for bounce lighting.
EF-42: This clip-on fl ash unit (powered by 
four AA batteries) has a Guide Number 
of 42/137 (ISO 100, m/ft.) and supports 
TTL fl ash control and auto power zoom 
in the range 24–105 mm (35 mm format...

112
Optional Accessories
 Connecting the Camera to Other Devices Connecting the Camera to Other Devices
  ■■Macro Extension TubeMacro Extension Tube
MCEX-11/16 *
  ■■Computer RelatedComputer Related
X-A2
Computer †
  ■■PrintingPrinting
Printer †PictBridge-
compatible printer †
* Available separately from FUJIFILM.
† Available separately from third-party suppliers. USB and HDMI  cables must be no more than 1.5 m (4.9 ft.) long.
USB cable †
USB cable †
SD/SDHC/SDXC memory card †
  ■■LensLens
XF-series...

113
Technical Notes
Caring for the CameraCaring for the Camera
To ensure continued enjoyment of the product, observe the following precautions.
Storage and UseStorage and Use
If the camera will not be used for an extended pe-
riod, remove the battery and memory card.  Do 
not store or use the camera in locations that are:
•  exposed to rain, steam, or smoke
•  very humid or extremely dusty
•  exposed to direct sunlight or very high temper-atures, such as in a closed vehicle on a sunny 
day
• extremely...

114
 Cleaning the Image Sensor Cleaning the Image Sensor
Multiple photographs marred by spots or blotches in identical locations may indicate the presence 
of dust on the camera image sensor.  Clean the sensor using the V SENSOR CLEANING option in 
the setup menu (
P 87); if the problem persists, you can clean the sensor manually as described below.  
Note that there will be a charge to repair or replace the image sensor if it is damaged during cleaning.
 1  Use a blower (not a brush) to remove dust from...