Fujitsu B19 W 5 Eco Operating Manual
Have a look at the manual Fujitsu B19 W 5 Eco Operating Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 86 Fujitsu manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Troubleshooting Having this problem? Check the following points: Picture disturbances (horizontal lines, picture noise)►Press theEXIT / AUTObutton to perform auto-adjustment of the screen. The screen becomes darker The background lighting has a limited lifetime. If your monitor display should become too dark, the background lighting will have to be replaced. ►Please contact our help desk. A26361-K1333-Z220-1-7619, edition 1 23
Notes regarding the DIN EN ISO 13406-2standard Notes regarding the DIN EN ISO 13406-2 standard Permanently unlit or lit pixels The standard of production techniques today cannot guarantee an absolutely fault-free screen display. A few isolated constant lit or unlit pixels (picture elements) may be present. The maximum permitted number of pixels faults is stipulated in the international standard ISO 13406-2 (Class II). Examples: A 17/19”flat-screen monitor with a resolution of 1400 x 900 has 1400 x 900 = 1296000 pixels. Each pixel consists of three subpixels (red, green and blue), so there are almost 4 million subpixels (dots) in total. In accordance with ISO 13406-2 (Class II), a maximum of 6 pixels and also 7 subpixels may be faulty 24 A26361-K1333-Z220-1-7619, edition 1
Technical specification Technical specification Condensation is not permitted, neither in the rated range of operation nor in the limit range of operation. B19W-5 ECO Dimensions and weight Visible diagonals 48.3 cm Dot pitch 0.285 mm Width 410 mm Image size Height 256 mm Maximum resolution 1440 x 900 Width 443 mm Height 354.3 mm Dimensions incl. monitor base Depth 200 mm Width 515 mm Height 413 mm Dimensions of box Depth 212 mm Weight (without packaging)approx. 5.4 kg Storable display modes28 Pixel error classes according to ISO 13406-2ClassII Accessories Power cable (1.8 m) D-SUB data cable (1.8 m) DVI-D data cable (1.8 m) Audio cable (1.8 m) Electrical data Analog positive, 0.7 V ss,75Ω Video Digital DVI-D Synchronisation Separate Sync. TTL, positive or negative Horizontal frequency 30 kHz .... 83 kHz (multi-scanning) Refresh rate55 Hz .... 76 Hz Maximum pixel rate 165 MHz Power supply switches automatically 100 V – 240 V, 50 Hz – 60 Hz Normal operation < 28 W Total power consumption Energy saving mode 0.5 W Sound output 1.0 W left; 1.0 W right A26361-K1333-Z220-1-7619, edition 1 25
Technical specification Ambient conditions Environment class 3K2, DIN IEC 721 Rated range of operation Humidity15 °C .... 35 °C 20 % .... 85 % Limit range of operation Humidity5 °C .... 35 °C 20 % .... 85 % VESA-DDC-compatible VGA interface Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the communications interface between the monitor and the computer. If the computer is equipped with a VESA-DDC-compatible VGA interface, it canautomatically read the data for ensuring optimum operation from the monitor and select the appropriate settings. Preset operating modes The picture position and size have been optimised at the factory for the operating modes listed above. Depending on the graphics card used, it may be necessary to adjust the display position or size. In this case you can change and save the settings (see chapter Changingthemonitorsettings,Page15). Most frequent operating modes Horizontal frequency Refresh rate Screen resolution 31.5 kHz 70 Hz 720 x 400 31.5 kHz 60 Hz 640 x 480 37.5 kHz 75 Hz 640 x 480 37.9 kHz 60 Hz 800 x 600 46.9 kHz 75 Hz 800 x 600 48.4 kHz 60 Hz 1024 x 768 60.0 kHz 75 Hz 1024 x 768 64.0 kHz 60 Hz 1280 x 1024 79.9 kHz 75 Hz 1280 x 1024 55.9 kHz 60 Hz 1440 x 900 70.6 kHz 75 Hz 1440 x 900 For ergonomic reasons, a screen resolution of 1440 x 900 pixels is recommended. Because of the technology used (active matrix) an LCD monitor provides a totally flicker-free picture even with a refresh rate of 60 Hz. 26 A26361-K1333-Z220-1-7619, edition 1
Technical specification SUB D port 6 10 11 1551 Pin Meaning 1 Video input red 2 Video input green 3 Video input blue 4 Ground 5 Ground 6 Video ground red 7 Video ground green 8 Video ground blue 9 +5 V (DDC) 10 Sync. ground 11 Ground 12 DDC Data 13 H. sync 14 V. sync 15 DDC Clock A26361-K1333-Z220-1-7619, edition 1 27
Technical specification DVI-D port 91 17 Pin Meaning 1 TMDS Data2– 2 TMDS Data2+ 3 TMDS Data 2/4 Shield 4 not connected 5 not connected 6 DDC Clock 7 DDC Data 8 Analog Vertical Sync 9 TMDS Data1– 10 TMDS Data1+ 11 TMDS Data 1/3 Shield 12 not connected 13 not connected 14 +5V Power 15 Earth 16 Hot Plug Detect 17 TMDS Data0– 18 TMDS Data0+ 19 TMDS Data 0/5 Shield 20 not connected 21 not connected 22 TMDS Clock Shield 23 TMDS Clock+ 24 TMDS Clock– 28 A26361-K1333-Z220-1-7619, edition 1