Fujitsu B19-5 Eco Manual

							Getting started
12345
0   -
ECO / BASIC
1 = Green standby mode switch
2 = Power connector
3 = AUDIO-IN socket4 = DVI-D socket (DVI)
5 = D-SUB socket (VGA)
►Connect one of the connectors of the data cable to the D-SUB socket or DVI-D socket of
the monitor and secure the plug-in connection by tightening the safety screws.
The monitor automatically detects the input when only one signal source is connected.
►Insert one plug of the audio line in the AUDIO IN socket on the monitor
and make sure it is properly engaged.
►Plug the power cable supplied into the power connector of the monitor.
►Secure the cover over the connections.
A lock (Kensington Lock) can be mounted in the security slot to protect the monitor
from theft.A Kensington Lock is not included with the monitor at delivery.
Connecting cables to the computer
Information on the computer connections and interfaces is contained in the
operating manual for your computer.
►Connect the data cable to the (active) monitor port on the computer and secure
the plug-in connection by tightening the safety screws.
►Insert the other plug of the audio cable in the audio output of the computer.
►Plug the power connector of the monitor into a properly grounded mains outlet.
►Plug the power connector of the computer into a properly grounded mains outlet.
If your computer has two monitor ports (onboard screen controller and separate
graphics card), the monitor port for the separate graphics card is active as standard.
A26361-K1317-Z220-1-7619, edition 2 13 
						

							Operation
Operation
Switching the device on and off
2
1
1 = Power supply indicator 2 = ON/OFF switch
Press the buttons from the bottom up.
The colour of the LED indicator changes as follows:
LED indicator Status
blue
Monitor and computer are switched on (normal mode).
green
Monitor and computer are switched on (ECO mode).
orange
The monitor is not receiving a video signal or is in energy-saving mode.
does not light up
The monitor is switched off (or is in green standby mode - power
consumption in standby and off mode≤0.1W )
Front
Rear
123
1 = power indicator 3 = green standby mode switch
2=ON/OFFswitch
14 A26361-K1317-Z220-1-7619, edition 2 
						

							Operation
In switch position 0 (ECO), green standby mode is activated, in which the monitor
consumes≤0.1 W. If the monitor cannot be switched on and remains dark, the switch
must be set to - (BASIC). The monitor then consumes < 1 W in standby mode.
►Switch the device on using the ON/OFF switch.
Only switch on the computer after you have switched on the monitor.
Notes on power management
If your computer is equipped with power management (power-saving mode), the monitor can fully
support this function. Here the monitor does not distinguish between the individual energy-saving
modes of the computer (standby mode, suspend mode and OFF mode), as it is capable of
immediately switching into the modewith the highest energy-saving effect.
Stage OperationPower saving mode
Normal
ECO Green Standby
ModeCompatible
Power supply
indicatorLights up blue Lights up green unlit Lights up orange
Monitor Max. brightness
typ. 200 cd/m2Unlit Unlit
Power consumption
(typical)B17-5:
						

							Operation
Changing the monitor settings
When putting the monitor into operation for thefirst time, the screen display should
be optimally adapted to the display adapter used.
Changing the monitor settingswith the buttons
of the control panel
The buttons of the control panel have two functions. With the OSD menu not
activated, you can make the following settings directly:
SELECT/ MENUINPUTEXIT / AUTO
123
ECO
1 = Buttons for the OSD menu (On-Screen
Display)
2 = Power supply indicator3 = ON/OFF switch
Performing auto-adjustment of the monitor
►Press theEXIT / AUTObutton for about 1 second.
TheAuto Processingmessage appears
Picture quality and position are set to optimum values for your system.
Selecting input signal (D-SUB/DVI-D)
►Press the Back /INPUTbuttontoopentheInput selectsetting window.
►Press the Forwards / ECO button or the Back /
INPUTbutton to select the
desired monitor connection (VGA or DVI).
This setting window can also be called when the OSD menu is locked.
16 A26361-K1317-Z220-1-7619, edition 2 
						

							Operation
Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
►Press the Forwards / ECO button to switch the ECO operating mode on or off.
The messageECO on / offis displayed.
If the ECO operating mode is activated, the following OSD settings are changed:
Colour
temperature6500K
Brightness
reduced
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
►Press and keep the
SELECT/MENUbutton pressed for a few seconds while you
switch on the monitor with the ON/OFF switch.
The messageOSD locked / unlockedis displayed.
Proceed in the same way to release the locked OSD menu again.
Locking the ON/OFF button
The ON/OFF switch can be locked to prevent accidental or unauthorised
changes to the monitor settings.
►Press the Forwards / ECO button and the Back /
INPUTbutton at the same
time and keep them pressed for a few seconds.
The messagePower button locked / unlockedis displayed.
Proceed in the same way torelease the locked ON/OFF switch again.
Changing the monitor settings using the OSD menu
With the buttons on the control panel, you can call up and use the integrated
OSD (On-Screen Display) menu.
A26361-K1317-Z220-1-7619, edition 2 17 
						

							Operation
The OSD menu is available in various languages. The English menu names are
used in the following description (default setting). You can select another language
using the OSDLanguagefunction in theOSD Setupmenu.
►Press theSELECT/MENUbutton to
activate the OSD menu.
The main menu appears, with icons
for the setting functions.
Thefirst icon, (Brightness/Contrast), is
highlighted and the associated functions are
visible in the right-hand menufield.
►Press the Forwards / ECO button or
the Back /INPUTbutton to highlight
another icon (e.g.Image adjust).
►Press the
SELECT/MENUbutton to
select the highlighted icon.
TheImage adjustsetup window will
be displayed.
►Press the Forwards / ECO button or
the Back /
INPUTbutton to highlight
another function.
►Press the
SELECT/MENUbutton to
select the highlighted function.
►Press the Forwards / ECO button or
the Back /
INPUTbutton to highlight
another function.
►Press the
EXIT / AUTObutton to
exit the function.
►Press the Forwards / ECO button or the
Back /
INPUTbutton to highlight another
function or press theEXIT / AUTObutton
to return to the main menu.
All changes are stored automatically.
18 A26361-K1317-Z220-1-7619, edition 2 
						

							Operation
If you wish to change other settings, select the corresponding function from the OSD
main menu. All possible adjustments of the main menu are described below.
OSD menu functions
The OSD menu for analog monitor operation is described below. During
digital operation some functions are not available, as they are not required
due to the digital transmission technology used.
Adjusting the brightness and contrast
Call up theBrightness/Contrastsetting window
Brightness
Set the brightness of the display
With this function you changethe brightness of the background lighting.
You can see whether the ECO operating mode is active under the bar for
displaying the brightness setting.
Contrast
Set the contrast of the display
With this function you modify the contrast of bright colour tones.
Black level
Set the brightness of the display
With this function you modify the contrast of dark colour tones.
Auto level
Adjust the signal level
With this function you can automatically set the contrast.
The function is executed with the
SELECT / MENUbutton.
If the contrast is set too high, bright surfaces can no longer be distinguished from very
bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved.
A26361-K1317-Z220-1-7619, edition 2 19 
						

							Operation
Adjusting the picture size and position
Open theImage adjustwindow
H-position
Adjusting the horizontal position
With this function you can move the picture to the left or to the right.
V-position
Adjusting the vertical position
With this function you can move the picture up or down.
Clock
Adjusting the synchronisation
With this function you can adjust the picture width in order to eliminate
vertical picture faults.
Phase
Eliminating picture faults
With this function youfine-tune your monitor to eliminate picture faults.
Sharpness
Adjusting the picture sharpness
This function is used to adjust the picture sharpness.
Adjusting the volume
Call theAudiosetting window
Vo l u m e
Set the volume for playback with the integrated loudspeakers
Mute
Switch the loudspeakers off or on
Setting the colour temperature and colours
Call theColoursetting window
Select the colour temperature
The warmth of the screen colours is set using the colour temperature. The
colour temperature is measured in Kelvin (K). You can choose between
sRGB,6500 K,7500 K,9300 K,NativeandCustom Colour.
In the user-defined setting you can change the colour ratios of the basic
colours (red, green, blue) as required.
20 A26361-K1317-Z220-1-7619, edition 2 
						

							Operation
Adjusting the display of the OSD menu
Calling theOSD Setupadjustment window
Language
Selecting the language for the OSD menu
With this function you choose between English (default setting), French,
German, Italian and Spanish as the language for the OSD menu.
OSDH position
Setting the horizontal position of the OSD menu
With this function you can move the OSD menu to the left or to the right.
OSDV position
Setting the vertical position of the OSD menu
With this function you can move the OSD menu up or down.
OSDTimeout
Setting the display duration of the OSD menu
With this function you can select a value from 10 to 120 seconds.
If the set time expires without a setting being made, the OSD menu is
automatically hidden.
OSD Rotation
With this function you switch the OSD menu from portrait mode to landscape
mode and vice versa.
Off = The OSD menu is displayed in portrait mode.
On = The OSD menu is displayed in landscape mode.
Setting functions in the Advanced menu
Call up theAdvancedsetting window
Input select
Selecting the input signal
This function allows you to switch the monitor from analogue to digital mode
and vice versa, when two signal sources are connected.
This is on condition that the graphic card supports this function.
DDC-CI
Activation/deactivation of the DDC-CI
On= The DDC-CI function is enabled (standard setting)
Off= The DDC-CI function is disabled
Factory Recall
Activating the factory settings
With this function all settings are reset to the factory settings without
prompting for confirmation.
Press the
SELECT/MENUbutton to activate the function. TheAuto
Processingmessage is displayed.
A26361-K1317-Z220-1-7619, edition 2 21 
						

							Operation
Displaying information
Call theInformationsetting window
With this function the model designation, serial number, resolution, H/V
frequency, input signal and polarity of the synchronisation signal are
displayed.
22 A26361-K1317-Z220-1-7619, edition 2