Fujitsu B19-5 Eco Manual

							Troubleshooting
Troubleshooting
Should an error occur,first check the following points. If the distortion is still not eliminated,
the monitor should, if possible, be checked on another computer.
If you are unable to solve the problem, please inform our help desk.
Having this problem? Check the following points:
No screen display
Power indicator does not light up►Check whether the main switch at the rear
of the monitor is switched on.
►Check whether the power cableon the
monitor is connected correctly.
►Check whether the computer is switched on.
No screen display
Powerindicatorislit►Check whether the computer is switched on.
►Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
►Press any key on the computer keyboard.
The computer may be in power saving
mode.
►Alter the brightness and/or contrast until you
get a picture.
Message:No Signal
►Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
►Check whether the computer is switched on.
Message:Frequency out of range:## kHz
/ ## Hz Please change the display mode
to 1280 x 1024 with 60 HzThe input signal (horizontal frequency and
refresh rate) at the displayed input does not
correspond to the technical data for the monitor.
►Adjust the video frequency range using the
computer software (see documentation for
the computer or display adapter).
►Set a different screen resolution using the
computer software (see documentation for
the computer or displayadapter).
Picture position not correct
The monitor recognises an undefined mode (see
chapterTechnicalspecification,Page26).
►Press the
EXIT / AUTObutton to perform
auto-adjustment of the screen.
Picture is shaking
►Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
►Press the
EXIT / AUTObutton to perform
auto-adjustment of the screen.
Picture is wrongly adjusted►Press theSELECT / MENUbutton to
activate theFactory Recallfunction.
TheAuto Processingmessage appears.
A26361-K1317-Z220-1-7619, edition 2 23 
						

							Troubleshooting
Having this problem? Check the following points:
Picture disturbances (verticallines)
►Press theEXIT / AUTObutton to perform
auto-adjustment of the screen.
Picture disturbances (horizontal lines, picture
noise)►Press theEXIT / AUTObutton to perform
auto-adjustment of the screen.
The screen becomes darker
The background lighting has a limited lifetime.
If your monitor display should become too dark,
the background lighting will have to be replaced.
►Please contact our help desk.
24 A26361-K1317-Z220-1-7619, edition 2 
						

							Notes regarding the DIN EN ISO 13406-2standard
Notes regarding the DIN EN ISO
13406-2 standard
Permanently unlit or lit pixels
The standard of production techniques today cannot guarantee an absolutely fault-free screen
display. A few isolated constant lit or unlit pixels(picture elements) may be present. The maximum
permitted number of pixels faults is stipulated in the international standard ISO 13406-2 (Class II).
Examples:
Example: A 17/19”flat-screen monitor with a resolution of 1280 x 1024 has 1280 x 1024 =
1310720 pixels. Each pixel consists of three subpixels (red, green and blue), so there
are almost 4 million subpixels (dots) in total. In accordance with ISO 13406-2 (Class II),
a maximum of 6 pixels and also 7 subpixels may be faulty.
A26361-K1317-Z220-1-7619, edition 2 25 
						

							Technical specification
Technical specification
Condensation is not permitted, neither in the rated range of operation
nor in the limit range of operation.
B17-5 ECO B19-5 ECO
Dimensions and weight
Visible diagonals 43 cm 48 cm
Dot pitch 0.264 mm 0.294 mm
Width 337.9 mm 376.3 mm Image size
Height 270.3 mm 301 mm
Maximum resolution 1280 x 1024 1280 x 1024
Width 373 mm 412 mm
Height 405 mm 409 mm Dimensions incl.
monitor base
Depth 209 mm 209 mm
Width 453 mm 453 mm
Height 436 mm 464 mm Dimensions of box
Depth 212 mm 212 mm
Weight (without packaging)approx. 5.2 kg approx. 5.9 kg
Storable display modes28 28
Pixel error classes
according to
ISO 13406-2ClassII II
Accessories
Power cable (1.8 m)
D-SUB data cable (1.8 m)
DVI-D data cable (1.8 m)
Audio cable (1.8 m)
Electrical data
Analogue
positive, 0.7 V
ss,75Ω Video
Digital DVI-D
Synchronisation Separate Sync. TTL, positive or negative
Horizontal frequency 30 kHz .... 83 kHz (multi-scanning)
Refresh rate55 Hz .... 76 Hz
Max. pixel rate 165 MHz
Power supply switches automatically
100 V – 240 V, 50 Hz – 60 Hz
Normal operation
< 24 W in normal operation (17)
< 28 W in normal operation (19) Total power
consumption
Energy saving mode
≤0.1 W in Green Standby Mode
Max. sound output
1.0 W left; 1.0 W right
26 A26361-K1317-Z220-1-7619, edition 2 
						

							Technical specification
Environmental conditions
Environment class 3K2, DIN IEC 721
Rated range of operation
Humidity15 °C .... 35 °C
20 % .... 85 %
Limit range of operation
Humidity5 °C .... 35 °C
20 % .... 85 %
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications
interface between the monitor and the computer. If the computer is equipped with a
VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring
optimum operation from the monitor and select the appropriate settings.
Preset operating modes
The picture position and size have been optimised at the factory for the operating
modes listed above. Depending on the graphics card used, it may be necessary
to adjust the display position or size. In this case you can change and save the
settings (see chapter
Changingthemonitorsettings,Page16).
Most frequent operating modes
Horizontal frequency Refresh rate Screen resolution
31.5 kHz 70 Hz 720 x 400
31.5 kHz 60 Hz 640 x 480
37.5 kHz 75 Hz 640 x 480
37.9 kHz 60 Hz 800 x 600
46.9 kHz 75 Hz 800 x 600
48.4 kHz 60 Hz 1024 x 768
60.0 kHz 75 Hz 1024 x 768
64.0 kHz 60 Hz 1280 x 1024
79.9 kHz 75 Hz 1280 x 1024
For ergonomic reasons, a screen resolution of 1280 x 1024 pixels is recommended.
Because of the technology used (active matrix), an LCD monitor provides a totally
flicker-free picture, even with a refresh rate of 60 Hz.
A26361-K1317-Z220-1-7619, edition 2 27 
						

							Technical specification
SUBDport
6 10
11 1551
Pin Meaning
1 Video input red
2 Video input green
3 Video input blue
4
Ground
5
Ground
6 Video ground red
7
Video ground green
8 Video ground blue
9
+5 V (DDC)
10
Sync. ground
11
Ground
12
DDC Data
13 H. sync
14 V. sync
15
DDC Clock
28 A26361-K1317-Z220-1-7619, edition 2 
						

							Technical specification
DVI-D port
91
17
Pin Meaning
1
TMDS Data2–
2
TMDS Data2+
3
TMDS Data 2/4 Shield
4 not connected
5
not connected
6
DDC Clock
7
DDC Data
8
Analog Vertical Sync
9
TMDS Data1–
10
TMDS Data1+
11
TMDS Data 1/3 Shield
12 not connected
13 not connected
14 +5V Power
15 Earth
16 Hot Plug Detect
17
TMDS Data0–
18
TMDS Data0+
19
TMDS Data 0/5 Shield
20 not connected
21 not connected
22
TMDS Clock Shield
23
TMDS Clock+
24
TMDS Clock–
A26361-K1317-Z220-1-7619, edition 2 29