Fujitsu A17 5 Eco Operating Manual

							Troubleshooting
Having this problem? Check the following points:
Picture disturbances (verticallines)
►Press theEXIT / AUTObutton to perform
auto-adjustment of the screen.
Picture disturbances (horizontal lines, picture
noise)►Press theEXIT / AUTObutton to perform
auto-adjustment of the screen.
The screen becomes darker
The background lighting has a limited lifetime.
If your monitor display should become too dark,
the background lighting will have to be replaced.
►Contact our Service Desk.
A26361-K1338-Z220-1-7619, edition 1 23
 
						

							Explanatory information about standard ISO 9241-3
Explanatory information about
standard ISO 9241-3
Bright or dark pixels
It is not possible to guarantee an absolutely fault-free screen monitor with current
production technology. A few isolated permanently bright or dark pixels (picture
elements) may be present. The maximum permitted number of such faulty pixels is
specified in the international standard ISO 9241-3 (Class II).
Examples:
A 43/48 m (17/19“)flat-screen monitor with a resolution of 1280 x 1024 has 1280 x 1024 =
1310720 pixels. Each pixel consists of three subpixels (red, green and blue), so there are
almost 3.9 million subpixels in total. According to ISO 9241-3 (Class II), a maximum of 3
bright and 3 dark pixels plus an additional 6 bright or 13 dark subpixels or an equivalent mix
(1 bright subpixel counts as 2 dark subpixels) are allowed to be defective.
Pixel
A pixel consists of 3 subpixels, normally red, green and blue. A pixel is
the smallest element that can be generated by the overall functionality of
the monitor.
SubpixelA subpixel is a separately addressable internal structure within a pixel that
extends the functionality of the pixel.
24 A26361-K1338-Z220-1-7619, edition 1
 
						

							Technical data
Technical data
Condensation is not permitted, neither in the rated range of operation
nor in the limit range of operation.
A17-5 ECO A19-5ECO
Dimensions and weight
Visible diagonals 43 cm 48 cm
Dot pitch 0.264 mm 0.294 mm
Width 337.9 mm 376.3 mm Picture size
Height 270.3 mm 301 mm
Maximum resolution 1280 x 1024 1280 x 1024
Width 373.3 mm 412 mm
Height 376.9 mm 402 mm Dimensions incl.
monitor base
Depth 200.3 mm 200.3 mm
Weight (without packaging)Approx. 4 kg Approx. 4.5 kg
Storable display modes26 26
Pixel error classes
according to
ISO 9241-3ClassII II
Electrical data
Analogue
Positive, 0.7 V
pp,75Ω Video
Digital-
Synchronisation Separate sync. TTL,
positive or negative
Horizontal frequency31 kHz .... 82 kHz
(multi-scan)
Refresh rate56 Hz .... 76 Hz
Maximum pixel rate 165 MHz
Power supply
Switches automatically
100V–240V,
50 Hz – 60 Hz
Normal operation < 24 W < 28 W
Overall power
consumption
(without audio)Power saving mode < 1 W
Sound output 1.0 W left; 1.0 W right
A26361-K1338-Z220-1-7619, edition 1 25
 
						

							Technical data
Ambient conditions
Environment class 3K2, DIN IEC 721
Rated range of operation
Humidity15 °C .... 35 °C
20 % .... 85 %
Limit range of operation
Humidity5 °C .... 35 °C
20 % .... 85 %
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications
interface between the monitor and the computer. If the computer is equipped with a
VESA-DDC-compatible VGA interface, it canautomatically read the data for ensuring
optimum operation from the monitor and select the appropriate settings.
Preset operating modes
The picture position and size have been optimised at the factory for the operating
modes listed above. Depending on the graphics card used, it may be necessary
to adjust the display position or size. In this case you can change and save the
settings (see chapter
Changingthemonitorsettings,Page15).
Most frequent operating modes
Horizontal frequency Refresh rate Screen resolution
31.5 kHz 70 Hz 720 x 400
31.5 kHz 60 Hz 640 x 480
37.5 kHz 75 Hz 640 x 480
37.9 kHz 60 Hz 800 x 600
46.9 kHz 75 Hz 800 x 600
48.4 kHz 60 Hz 1024 x 768
60.0 kHz 75 Hz 1024 x 768
64.0 kHz 60 Hz 1280 x 1024
80.0 kHz 75 Hz 1280 x 1024
For ergonomic reasons, a screen resolution of 1280 x 1024 pixels is recommended.
Because of the technology used (active matrix), an LCD monitor provides a totally
flicker-free picture, even with a refresh rate of 60 Hz.
26 A26361-K1338-Z220-1-7619, edition 1
 
						

							Technical data
SUB D port
6 10
11 1551
Pin Meaning
1 Video input red
2 Video input green
3 Video input blue
4
Ground
5
Ground
6 Video ground red
7
Video ground green
8 Video ground blue
9
+5 V (DDC)
10
Sync. ground
11
Ground
12
DDC Data
13 H. sync
14 V. sync
15
DDC Clock
A26361-K1338-Z220-1-7619, edition 1 27