Fujifilm Camera X30 Owners Manual

Parts of the Camera
The Selector
The Command Dial
The Control Ring
The [VIEW MODE] Button
The LCD Monitor
Diopter Adjustment
The Indicator Lamp
The [DISP/BACK] Button
The [DRIVE] Button
Parts of the Camera
002D0020 003100310020 002D  

Control ring options button
Shutter button
Movie-record button (function button 1)
Exposure compensation dial
Mode dial
AF-assist illuminator
Self-timer lamp
Hot shoe Microphone (L/R)
Flash
Strap eyelet
Focus mode selector
Control ring
Zoom ring
[ON/OFF]
 switch
Lens
Parts of the Camera
002D0020 003100320020 002D  

Monitor
Electronic viewfinder (EVF)
Te r m i n a l   c o v e r
DC coupler cable cover
Battery chamber cover
Battery-chamber cover latch
SpeakerTripod mount
Microphone /remote release connector
Micro HDMI connector *
Micro USB connector
Battery latch
Battery chamber
Memory card slot
Parts of the Camera
002D0020 003100330020 002D  

* Use an HDMI cable no more than 1.5 m (4.9 ft.) long.
(flash pop-up) switch
 (playback) button
Diopter adjustment control
Eye sensor
Indicator lamp
[VIEW MODE] button
[DRIVE]  button
(delete) button (playback mode)
Command dial [AEL/AFL]
 (autoexposure /autofocus lock)
button
[Q]  (quick menu) button
RAW conversion button (playback mode)
Selector/function buttons
[Fn] button (funct ion button 6)
[Wi-Fi]  button (playback mode)
[DISP] (display)/ [BACK] button
Parts of the Camera
002D0020 003100340020 002D  

Press the selector up ( ), left ( ), right ( ), or down ( ) to highlight items and press
[MENU/OK]  ( ) to select. The up, left, right, and down buttons also doubl e as function buttons
2 through 5.
To prevent accidental operation of the selector and the  [Q] and  [Fn] buttons during
shooting, press  [MENU/OK] until   is displayed. The controls can be unlocked by
pressing  [MENU/OK] until   is no longer displayed.
See Also
The Function Buttons ([Fn] (Function) Buttons)
The Selector
002D0020 003100350020...

The command dial can be used to navigate the menus, to view pictures, and to select options in
the quick menu display.
Press the center of the command  dial to zoom in on the active focus area during shooting or
playback.
The Command Dial
002D0020 003100360020 002D  

Use the control ring for quick access to camera functions during shooting.
The function assigned to the control ring can be selected by pressing the control ring options
button. Choose from:
[DEFAULT]
[ISO]
[WHITE BALANCE]
[FILM SIMULATION]
[CONTINUOUS]
The Control Ring
002D0020 003100370020 002D  

“[DEFAULT] ”
When [DEFAULT]  is selected, the function assigned to the control ring changes with the
shooting mode.
Mode Control ring used for[P] Program shift; manual focus (*1)
[S] Shutter-speed selecti on; manual focus (*1)
[A] Aperture selection; manual focus (*1)
[M] Shutter-speed /aperture select ion (*2); manual focus (*1)
Film simulation
Film simulation; manual focus (*1)
[Filter] Advanced filter selection
[Adv.] Advanced mode selection
[SP1] /[SP2] Scene selection; manual focus (*1)
*1 Manual...

Press the [VIEW MODE]  button to cycle through displays as shown below.
  [EYE SENSOR] : Automatic display sele ction using eye sensor
[EVF ONLY] : Viewfinder only
[LCD ONLY] : LCD monitor only
[EVF ONLY]  +   : Viewfinder only; eye sensor turns display on or off
The [VIEW MODE] Button
002D0020 003100390020 002D  

The Eye Sensor
The eye sensor turns the viewfinder on when you put your eye to the viewfinder and turns it
off when you take your eye away (note that the eye sensor may respond to objects other
than your eye or to light shining directly on the sensor). If automatic display selection is
enabled, the LCD monitor will turn on when the viewfinder turns  off.
The [VIEW MODE] Button
002D0020 003200300020 002D