Fujifilm Camera X T1 Owners Manual

105
Connections
Printing Pictures via USB
  During Printing During Printing
The message shown at right is 
displayed during printing.  Press 
DISP/BACK to cancel before all 
pictures are printed (depending 
on the printer, printing may end 
before the current picture has 
printed).
If printing is interrupted, turn the camera off    and 
then on again.
  Disconnecting the Camera  Disconnecting the Camera
Confi  rm that the above message is not displayed and 
turn the camera off .  Disconnect the USB...

106
Printing Pictures via USB
 
■ WITH DATE s/ WITHOUT  DATE
To modify the DPOF print order, select K  PRINT 
ORDER (DPOF) in the playback menu and press 
the selector up or down to highlight WITH 
DATE  s or WITHOUT DATE.
SLIDE SHOW PLAYBACK MENU
PHOTOBOOK ASSIST
MARK FOR UPLOAD TO
IMAGE SEARCH
PRINT ORDER  (
DPOF )
PC AUTO SAVERED EYE REMOVALY
WITH DATE sWITHOUT DATE
RESET ALL
WITH DATE s: Print date of recording 
on pictures.
WITHOUT DATE: Print pictures without 
date.
Press MENU/OK and follow the...

107
Connections
Printing Pictures via USB
 
■ RESET ALL
To cancel the current print 
order, select RESET ALL for 
K  PRINT ORDER (DPOF) .  The 
confi rmation shown at right 
will be displayed; press  MENU/OK 
to remove all pictures from the 
order.
 
R Print orders can contain a maximum of 999 pictures.
 
R If a memory card is inserted 
containing a print order cre-
ated by another camera, the 
message shown at right will 
be displayed.  Pressing MENU/OK 
cancels the print order; a new 
print order must...

108
 Viewing Pictures on TV Viewing Pictures on TV
To show pictures to a group, connect the camera to a TV using an HDMI cable (available separately 
from third-party suppliers; note that the TV can only be used for playback, not shooting).
 1  Turn the camera off .
 2  Connect the cable as shown below.
Insert into 
HDMI mini connector
Insert into 
HDMI connector
 
Q Use an HDMI cable no more than 1.5 m (4.9 ft.) long.
 
R Be sure the connectors are fully inserted.
 3 Tune the television to the HDMI...

109
Technical Notes
Technical NotesTechnical Notes
 Optional Accessories Optional  Accessories
The camera supports a wide range of accessories from FUJIFILM and other manufacturers.
 Accessories from FUJIFILM Accessories from FUJIFILM
The following optional accessories are available from FUJIFILM.  For the latest information on the accesso-
ries available in your region, check with your local FUJIFILM representative or visit http://www.fujifilm.com/
products/digital_cameras/index.html.
Rechargeable...

110
Optional Accessories
 FUJINON lenses FUJINON  lensesXF-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount.
XC-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount.
 Shoe-mounted fl  ash units Shoe-mounted fl  ash unitsEF-20: This clip-on fl  ash unit (powered by two AA batteries) has a Guide Number of 20/65 (ISO 100, m/ft.) and 
supports TTL fl ash control.  The fl ash head can be rotated upwards 90° for bounce lighting.
EF-42: This...

111
Technical Notes
Optional Accessories
Front lens capsFront lens capsFLCP-39/FLCP-52/FLCP-58/FLCP-62/FLCP-72: Protect the front lens element when the lens is not in use.
Rear lens capsRear lens capsRLCP-001: Protect the rear lens element when the lens is not attached to the camera.
Body capsBody caps
BCP-001: Cover the camera lens mount when no lens is attached.
Battery gripsBattery gripsVG-XT1 : This grip accommodates an extra battery for improved endurance and makes it easier to hold the 
camera...

112
Optional Accessories
 Connecting the Camera to Other Devices Connecting the Camera to Other Devices
 ■Remote Shutter Releases
RR-90 remote release *
 ■Printing
PictBridge-
compatible 
printer
 †
Printer †
USB cable †
 ■Computer Related
Computer †
USB cable †
X-T1
 ■External Microphones
MIC-ST1 stereo microphone *
 ■ Flash  Photography
EF-20 shoe-
mounted fl ash *EF-42 shoe-
mounted fl ash *EF-X20 shoe-
mounted fl ash *
 ■Lenses
XF-series lenses *XC-series lenses *
 ■M Mount Adapters
FUJIFILM M mount...

113
Technical Notes
 The Vertical Battery Grip The Vertical Battery Grip
The optional VG-XT1 vertical battery grip accommodates an extra battery for improved endurance and 
makes it easier to hold the camera rotated 90 ° to frame pictures in “tall” (portrait) orientation.
Parts of the VG-XT1Parts of the VG-XT1
The shooting controls on the VG-XT1 perform the same functions as the controls on the camera.
A Shutter button
B Control lock
C Front command dial
D Lock screw knob
E Eyelet for camera strap
F...

114
The Vertical Battery Grip
Attaching the VG-XT1Attaching the VG-XT1
The VG-XT1 attaches as shown below.
 1 Remove the vertical battery grip connector cover from the camera and place it in the grip 
connector cover compartment.
 2 Align the connectors on the grip with the matching connectors on the camera.
 3  Rotate the lock screw knob to tighten the lock screw.
Inserting a BatteryInserting a Battery
Insert a battery as shown below.
 1 Unlatch and open the bat-tery-chamber cover.
 2  Insert the...