Fujifilm Camera Finepix Xp200 Owners Manual
Have a look at the manual Fujifilm Camera Finepix Xp200 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 17 Fujifilm manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
101Technical Notes Caring for the Camera Cleaning Cleaning Use a blower to remove dust from the protective glass covering the lens and LCD monitor, then gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece of FUJIFILM lens-cleaning paper to which a small amount of lens-cleaning fluid has been applied. Care should be taken to avoid scratching the protective glass or LCD monitor. The camera body can be cleaned with a soft, dry cloth. Do not use alcohol, thinner, or other volatile chemicals. TravelingTraveling Keep the camera in your carry-on baggage. Checked baggage may suffer violent shocks that could damage the camera.
102 Troubleshooting Troubleshooting Problems and Solutions Problems and Solutions Water in the Camera ProblemProblemSolutionSolution Water in the camera.Water in the camera.The battery-chamber cover was not fully closed before the camera was immersed, or The battery-chamber cover was not fully closed before the camera was immersed, or was opened under waterwas opened under water: Take the camera to a FUJIFILM-authorized service technician for : Take the camera to a FUJIFILM-authorized service technician for repairs. Do not turn the camera on.repairs. Do not turn the camera on. Power and Battery ProblemProblemSolutionSolution The camera does not The camera does not turn on.turn on. • • The battery is exhaustedThe battery is exhausted: Charge the battery or insert a fully-charged spare battery (: Charge the battery or insert a fully-charged spare battery (PP 7, 14). 7, 14).• • The battery is inserted incorrectlyThe battery is inserted incorrectly: Reinsert in the correct orientation (: Reinsert in the correct orientation (PP 8). 8).• • The battery-chamber cover is not latchedThe battery-chamber cover is not latched: Latch the battery-chamber cover (: Latch the battery-chamber cover (PP 10). 10). The battery runs down The battery runs down quickly.quickly. • • The battery is coldThe battery is cold: Warm the battery by placing it in a pocket or other warm place and reinsert : Warm the battery by placing it in a pocket or other warm place and reinsert it in the camera immediately before taking a picture.it in the camera immediately before taking a picture.• • There is dirt on the battery terminalsThere is dirt on the battery terminals: Clean the terminals with a soft, dry cloth.: Clean the terminals with a soft, dry cloth.• • QQ is selected for shooting mode is selected for shooting mode: Select : Select BB mode to reduce the drain on the battery mode to reduce the drain on the battery ((PP 25). 25).• • xx TRACKINGTRACKING is selected for is selected for FF AF MODEAF MODE: Select a different AF mode (: Select a different AF mode (PP 78). 78).• • The battery has been charged many timesThe battery has been charged many times: The battery has reached the end of its charging : The battery has reached the end of its charging life. Purchase a new battery.life. Purchase a new battery. The camera turns off The camera turns off suddenly.suddenly.Charge the battery or insert a fully-charged spare battery (Charge the battery or insert a fully-charged spare battery (PP 7, 14). 7, 14). Charging is slow.Charging is slow.Charge the battery at room temperature (Charge the battery at room temperature (PP vi). vi).
103Troubleshooting Problems and Solutions ProblemProblemSolutionSolution The battery does not The battery does not charge. / charge. / The self-timer The self-timer lamp flashes.lamp flashes. Reinsert the battery in the correct orientation and make sure that the power connection is made Reinsert the battery in the correct orientation and make sure that the power connection is made ((PP 7, 14). 7, 14).• • There is dirt on the battery terminalsThere is dirt on the battery terminals: Clean the terminals with a soft, dry cloth.: Clean the terminals with a soft, dry cloth.• • The battery has been charged many timesThe battery has been charged many times: The battery has reached the end of its charging : The battery has reached the end of its charging life. Purchase a new battery. If the battery still fails to charge, contact your FUJIFILM dealer.life. Purchase a new battery. If the battery still fails to charge, contact your FUJIFILM dealer.• • The battery is too hot or too coldThe battery is too hot or too cold: Wait for the battery temperature to stabilize (: Wait for the battery temperature to stabilize (PP 14). 14). Menus and Displays ProblemProblemSolutionSolution Menus and displays are Menus and displays are not in English.not in English.Select Select ENGLISHENGLISH for for LL aa ( (PP 19, 89). 19, 89). Shooting ProblemProblemSolutionSolution No picture is taken when No picture is taken when the shutter button is the shutter button is pressed.pressed. • • Memory is fullMemory is full: Insert a new memory card or delete pictures (: Insert a new memory card or delete pictures (PP 9, 47). 9, 47).• • Memory is not formattedMemory is not formatted: Format the memory card or internal memory (: Format the memory card or internal memory (PP 91). 91).• • There is dirt on the memory card contactsThere is dirt on the memory card contacts: Clean the contacts with a soft, dry cloth.: Clean the contacts with a soft, dry cloth.• • The memory card is damagedThe memory card is damaged: Insert a new memory card (: Insert a new memory card (PP 9). 9).• • The battery is exhaustedThe battery is exhausted: Charge the battery or insert a fully-charged spare battery (: Charge the battery or insert a fully-charged spare battery (PP 7, 14). 7, 14).• • The camera has turned off automaticallyThe camera has turned off automatically: Turn the camera on (: Turn the camera on (PP 17). 17). The camera does not The camera does not focus.focus. • • The subject is close to the cameraThe subject is close to the camera: Select macro mode (: Select macro mode (PP 39). 39).• • The subject is far away from the cameraThe subject is far away from the camera: Cancel macro mode (: Cancel macro mode (PP 39). 39).• • The subject is not suited to autofocusThe subject is not suited to autofocus: Use focus lock (: Use focus lock (PP 36). 36).
104Troubleshooting Problems and Solutions ProblemProblemSolutionSolution Macro mode is not Macro mode is not available.available.Choose a different shooting mode (Choose a different shooting mode (PP 25). 25). Intelligent Face Detection Intelligent Face Detection is not available.is not available.Choose a different shooting mode (Choose a different shooting mode (PP 25). 25). No face is detected.No face is detected. • • The subject’s face is obscured by sunglasses, a hat, long hair, or other objectsThe subject’s face is obscured by sunglasses, a hat, long hair, or other objects: Remove : Remove the obstructions.the obstructions.• • The subject’s face occupies only a small area of the frameThe subject’s face occupies only a small area of the frame: Change the composition so that : Change the composition so that the subject’s face occupies a larger area of the frame (the subject’s face occupies a larger area of the frame (PP 35). 35).• • The subject’s head is tilted or horizontalThe subject’s head is tilted or horizontal: Ask the subject to hold their head straight.: Ask the subject to hold their head straight.• • The camera is tiltedThe camera is tilted: Keep the camera level (: Keep the camera level (PP 21). 21).• • The subject’s face is poorly litThe subject’s face is poorly lit: Shoot in bright light.: Shoot in bright light. Wrong subject is Wrong subject is selected.selected.The selected subject is closer to the center of the frame than the main subject. Recompose the The selected subject is closer to the center of the frame than the main subject. Recompose the picture or turn face detection off and frame the picture using focus lock (picture or turn face detection off and frame the picture using focus lock (PP 36). 36). 3D images do not turn 3D images do not turn out as expected.out as expected.Use a tripod or change the distance the camera is moved between the first and second shots Use a tripod or change the distance the camera is moved between the first and second shots ((PP 33). 33). The flash does not fire.The flash does not fire. • • The flash is not available in the current shooting modeThe flash is not available in the current shooting mode: Choose a different shooting mode : Choose a different shooting mode ((PP 25). 25).• • The battery is exhaustedThe battery is exhausted: Charge the battery or insert a fully-charged spare battery (: Charge the battery or insert a fully-charged spare battery (PP 7, 14). 7, 14).• • The camera is in continuous modeThe camera is in continuous mode: Press the burst mode button to select single-frame mode : Press the burst mode button to select single-frame mode ((PP 43). 43).• • The camera is in silent modeThe camera is in silent mode: Turn silent mode off (: Turn silent mode off (PP 90). 90).• • The flash is off (The flash is off (PP)): Choose a different flash mode (: Choose a different flash mode (PP 40). 40).
105Troubleshooting Problems and Solutions ProblemProblemSolutionSolution Some flash modes are Some flash modes are not available.not available. • • The desired flash mode is not available in the current shooting modeThe desired flash mode is not available in the current shooting mode: Choose a different : Choose a different shooting mode (shooting mode (PP 25). 25).• • The camera is in silent modeThe camera is in silent mode: Turn silent mode off (: Turn silent mode off (PP 90). 90). The flash does not fully The flash does not fully light the subject.light the subject.• • The subject is not in range of the flashThe subject is not in range of the flash: Position the subject in range of the flash (: Position the subject in range of the flash (PP 116). 116).• • The flash window is obstructedThe flash window is obstructed: Hold the camera correctly (: Hold the camera correctly (PP 21). 21). Pictures are blurred.Pictures are blurred. • • The protective glass covering the lens is dirtyThe protective glass covering the lens is dirty: Clean the glass (: Clean the glass (PP 101). 101).• • The protective glass covering the lens is blockedThe protective glass covering the lens is blocked: Keep objects away from the lens (: Keep objects away from the lens (PP 21). 21).• • ss is displayed during shooting and the focus frame is displayed in red is displayed during shooting and the focus frame is displayed in red: Check focus : Check focus before shooting (before shooting (PP 109). 109).• • kk is displayed during shooting is displayed during shooting: Use the flash or a tripod (: Use the flash or a tripod (PP 41). 41). Pictures are mottled.Pictures are mottled. • • A slow shutter speed is selected at high temperaturesA slow shutter speed is selected at high temperatures: This is normal and does not : This is normal and does not indicated a malfunction.indicated a malfunction.• • The camera has been used continuously at high temperatures or a temperature The camera has been used continuously at high temperatures or a temperature warning is displayedwarning is displayed: Turn the camera off and wait for it to cool down.: Turn the camera off and wait for it to cool down. Vertical lines appear in Vertical lines appear in pictures.pictures.The camera has been used continuously at high temperatures. Turn the camera off and wait for The camera has been used continuously at high temperatures. Turn the camera off and wait for it to cool down.it to cool down. “Smear” in the form of “Smear” in the form of vertical purple or white vertical purple or white lines appears in the lines appears in the display.display. Vertical purple or white lines may appear after the camera has been used continuously at high Vertical purple or white lines may appear after the camera has been used continuously at high temperatures or when a very bright object is in the frame; this phenomenon is common to all CCD temperatures or when a very bright object is in the frame; this phenomenon is common to all CCD image sensors and does not indicate a malfunction. These lines are recorded in movies but do not image sensors and does not indicate a malfunction. These lines are recorded in movies but do not appear in photographs. Avoid framing bright objects when filming movies.appear in photographs. Avoid framing bright objects when filming movies. Location dataLocation dataLocation data are incorrect. The camera has been moved since location data were last updated.Location data are incorrect. The camera has been moved since location data were last updated. Sounds made by the Sounds made by the camera are recorded with camera are recorded with movies.movies. • • uu CONTINUOUSCONTINUOUS is selected foris selected for FF MOVIE AF MODEMOVIE AF MODE: Select a different AF mode : Select a different AF mode ((PP 78). 78).• • Zoom was adjusted during shootingZoom was adjusted during shooting: Do not adjust zoom during shooting.: Do not adjust zoom during shooting.• • Intelligent Face Detection is onIntelligent Face Detection is on: Turn Intelligent Face Detection off (: Turn Intelligent Face Detection off (PP 35). 35).
106Troubleshooting Problems and Solutions Playback ProblemProblemSolutionSolution Pictures are grainy.Pictures are grainy.The pictures were taken with a different make or model of camera.The pictures were taken with a different make or model of camera. Playback zoom is Playback zoom is unavailable.unavailable.The current picture is a resized copy with a size of The current picture is a resized copy with a size of aa.. No sound in movie No sound in movie playback.playback. • • Playback volume is too lowPlayback volume is too low: Adjust playback volume (: Adjust playback volume (PP 93). 93).• • The microphone was obstructedThe microphone was obstructed: Hold the camera correctly during recording (: Hold the camera correctly during recording (PP 21, 59). 21, 59).• • The speaker is obstructedThe speaker is obstructed: Hold the camera correctly during playback (: Hold the camera correctly during playback (PP 61). 61). Selected pictures are not Selected pictures are not deleted.deleted.Some of the pictures selected for deletion are protected. Remove protection using the device with Some of the pictures selected for deletion are protected. Remove protection using the device with which it was originally applied (which it was originally applied (PP 84). 84). File numbering is File numbering is unexpectedly reset.unexpectedly reset.The battery-chamber cover was opened while the camera was on. Turn the camera off before The battery-chamber cover was opened while the camera was on. Turn the camera off before opening the battery-chamber cover (opening the battery-chamber cover (PP 17). 17).
107Troubleshooting Problems and Solutions Connections/Miscellaneous ProblemProblemSolutionSolution Problem connecting or Problem connecting or uploading pictures to uploading pictures to smartphone.smartphone. • • The smartphone is too far awayThe smartphone is too far away: Move the devices closer.: Move the devices closer.• • Nearby devices are causing radio interferenceNearby devices are causing radio interference: Move the camera and smartphone away : Move the camera and smartphone away from microwave ovens or cordless phones.from microwave ovens or cordless phones. Can not upload images.Can not upload images. • • The smartphone is connected to another deviceThe smartphone is connected to another device: The smartphone and camera can connect : The smartphone and camera can connect to only one device at a time. End the connection and try again.to only one device at a time. End the connection and try again.• • There are several smartphones in the vicinityThere are several smartphones in the vicinity: Try connecting again. The presence of : Try connecting again. The presence of multiple smartphones can make connection difficult.multiple smartphones can make connection difficult. The current image is a movie or was created on another device and can not be uploaded to a The current image is a movie or was created on another device and can not be uploaded to a smartphone.smartphone. Smartphone will not Smartphone will not display pictures.display pictures. Select Select ONON for for rr WIRELESS SETTINGWIRELESS SETTING > > RESIZE IMAGE FOR SMARTPHONE RESIZE IMAGE FOR SMARTPHONE HH. Selecting . Selecting OFFOFF increases upload times for larger images; in addition, some phones may not increases upload times for larger images; in addition, some phones may not display images over a certain size.display images over a certain size. No picture or sound.No picture or sound.• • The camera is not properly connectedThe camera is not properly connected: Connect the camera properly (: Connect the camera properly (PP 62). 62).• • Input on the television is set to “TV”Input on the television is set to “TV”: Set input to “HDMI”.: Set input to “HDMI”.• • The volume on the TV is too lowThe volume on the TV is too low: Adjust the volume.: Adjust the volume. The computer does not The computer does not recognize the camera.recognize the camera.Be sure the camera and computer are correctly connected (Be sure the camera and computer are correctly connected (PP 70). 70). Pictures can not be Pictures can not be printed.printed.• • The camera is not properly connectedThe camera is not properly connected: Connect the camera correctly (: Connect the camera correctly (PP 63). 63).• • The printer is offThe printer is off: Turn the printer on.: Turn the printer on. Only one copy is printed/Only one copy is printed/the date is not printed.the date is not printed.The printer is not PictBridge compatible.The printer is not PictBridge compatible. The camera is The camera is unresponsive.unresponsive. • • Temporary camera malfunctionTemporary camera malfunction: Remove and reinsert the battery (: Remove and reinsert the battery (PP 7). 7).• • The battery is exhaustedThe battery is exhausted: Charge the battery (: Charge the battery (PP 14) or insert a fully-charged spare battery 14) or insert a fully-charged spare battery ((PP 7). 7). The camera does not The camera does not function as expected.function as expected.Remove and reinsert the battery (Remove and reinsert the battery (PP 7). If the problem persists, contact your FUJIFILM dealer. 7). If the problem persists, contact your FUJIFILM dealer.
108Troubleshooting Problems and Solutions ProblemProblemSolutionSolution No sound.No sound.Turn silent mode off (Turn silent mode off (PP 90). 90). Time and date stampsTime and date stamps• • Time and date stamps are not correctTime and date stamps are not correct: Set the camera clock (: Set the camera clock (PP 19). 19).• • Time and date stamps appear on photographsTime and date stamps appear on photographs: Time and date stamps can not be deleted. To : Time and date stamps can not be deleted. To prevent stamps appearing on new photographs, select prevent stamps appearing on new photographs, select OFFOFF for for UU DATE STAMPDATE STAMP ( (PP 97). 97).
109Troubleshooting Warning Messages and Displays Warning Messages and Displays The following warnings are displayed in the LCD monitor: WarningWarningDescriptionDescription B B ( (redred))Low battery. Charge the battery (Low battery. Charge the battery (PP 14) or insert a fully-charged spare battery ( 14) or insert a fully-charged spare battery (PP 7). 7). AA ( (blinks redblinks red))Battery exhausted. Charge the battery (Battery exhausted. Charge the battery (PP 14) or insert a fully-charged spare battery ( 14) or insert a fully-charged spare battery (PP 7). 7). k kSlow shutter speed. Pictures may be blurred; use the flash or a tripod.Slow shutter speed. Pictures may be blurred; use the flash or a tripod. s s((displayed in red with red displayed in red with red focus framefocus frame)) The camera can not focus. Try one of the following solutions:The camera can not focus. Try one of the following solutions:• • Use focus lock to focus on another subject at the same distance, then recompose the picture Use focus lock to focus on another subject at the same distance, then recompose the picture ((PP 36). 36).• • Use macro mode to focus when taking close-ups (Use macro mode to focus when taking close-ups (PP 39). 39). rrThe subject is too bright or too dark and the picture will be over- or under-exposed. If the subject The subject is too bright or too dark and the picture will be over- or under-exposed. If the subject is dark, use the flash (is dark, use the flash (PP 40). 40).Aperture or shutter speed Aperture or shutter speed displayed in reddisplayed in red FOCUS ERRORFOCUS ERROR Camera malfunction or moving parts of lens obstructed. Turn the camera off and then on again, Camera malfunction or moving parts of lens obstructed. Turn the camera off and then on again, taking care not to touch the lens. If the message persists, contact a FUJIFILM dealer.taking care not to touch the lens. If the message persists, contact a FUJIFILM dealer.TURN OFF THE CAMERA TURN OFF THE CAMERA AND TURN ON AGAINAND TURN ON AGAIN LENS CONTROL ERRORLENS CONTROL ERROR CARD NOT INITIALIZEDCARD NOT INITIALIZED • • The memory card or internal memory is not formatted or the memory card was The memory card or internal memory is not formatted or the memory card was formatted in a computer or other deviceformatted in a computer or other device: Format the memory card or internal memory : Format the memory card or internal memory using the using the KK FORMATFORMAT option in the camera setup menu ( option in the camera setup menu (PP 91). 91).• • The memory card contacts require cleaningThe memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If : Clean the contacts with a soft, dry cloth. If the message is repeated, format the card (the message is repeated, format the card (PP 91). If the message persists, replace the card. 91). If the message persists, replace the card.• • Camera malfunctionCamera malfunction: Contact a FUJIFILM dealer.: Contact a FUJIFILM dealer. PROTECTED CARDPROTECTED CARDThe memory card is locked. Unlock the card (The memory card is locked. Unlock the card (PP 9). 9). BUSYBUSYThe memory card is incorrectly formatted. Use the camera to format the card (The memory card is incorrectly formatted. Use the camera to format the card (PP 91). 91).
110Troubleshooting Warning Messages and Displays WarningWarningDescriptionDescription p pTurn the camera off and wait for it to cool. If no action is taken, the camera will turn off Turn the camera off and wait for it to cool. If no action is taken, the camera will turn off automatically.automatically. CARD ERRORCARD ERROR The memory card is not formatted for use in the camera. Format the card (The memory card is not formatted for use in the camera. Format the card (PP 91). 91). The memory card contacts require cleaning or the memory card is damaged. Clean the contacts The memory card contacts require cleaning or the memory card is damaged. Clean the contacts with a soft, dry cloth. If the message is repeated, format the card (with a soft, dry cloth. If the message is repeated, format the card (PP 91). If the message persists, 91). If the message persists, replace the card.replace the card. Incompatible memory card. Use a compatible card (Incompatible memory card. Use a compatible card (PP 12). 12). Camera malfunction. Contact a FUJIFILM dealer.Camera malfunction. Contact a FUJIFILM dealer. aa MEMORY FULL MEMORY FULL The memory card or internal memory is full and pictures can not be recorded or copied. Delete The memory card or internal memory is full and pictures can not be recorded or copied. Delete pictures or insert a memory card with more free space.pictures or insert a memory card with more free space. bb MEMORY FULL MEMORY FULL INTERNAL MEMORY IS INTERNAL MEMORY IS FULLFULLINSERT A NEW CARDINSERT A NEW CARD WRITE ERRORWRITE ERROR • • Memory card error or connection errorMemory card error or connection error: Reinsert the card or turn the camera off and then : Reinsert the card or turn the camera off and then on again. If the message persists, contact a FUJIFILM dealer.on again. If the message persists, contact a FUJIFILM dealer.• • Not enough memory remaining to record additional picturesNot enough memory remaining to record additional pictures: Delete pictures or insert : Delete pictures or insert a memory card with more free space.a memory card with more free space.• • The memory card or internal memory is not formattedThe memory card or internal memory is not formatted: Format the memory card or : Format the memory card or internal memory (internal memory (PP 91). 91). READ ERRORREAD ERROR • • The file is corrupt or was not created with the cameraThe file is corrupt or was not created with the camera: The file can not be viewed.: The file can not be viewed.• • The memory card contacts require cleaningThe memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If : Clean the contacts with a soft, dry cloth. If the message is repeated, format the card (the message is repeated, format the card (PP 91). If the message persists, replace the card. 91). If the message persists, replace the card.• • Camera malfunctionCamera malfunction: Contact a FUJIFILM dealer.: Contact a FUJIFILM dealer.