Fujifilm Camera Finepix F900exr Owners Manual

							67Movies
Viewing MoviesViewing Movies
During playback, movies are displayed in the LCD monitor 
as shown at right.  The following operations can be per-
formed while a movie is displayed:
OptionOptionDescriptionDescription
Start/pause Start/pause playbackplaybackPress the selector down
 to start playback.  Press again to 
pause.  While playback is paused, you can press the selec-
tor left or right to rewind or advance one frame at a time.
End playback/End playback/deletedelete Press the selector up
 to end playback.
Adjust speedAdjust speedPress the selector left or right
 to adjust playback speed dur-
ing playback.
Adjust volumeAdjust volume Press MENU/OK to pause playback and display volume con-
trols.  Press the selector up or down to adjust the volume 
and press MENU/OK to exit.  Volume can also be adjusted 
using the b SOUND SET-UP > PLAYBACK VOLUME
 op-
tion (P 101).
PLAY
100-006100-006
12 / 31 / 205012 / 31 / 205010 : 00  AM10 : 00  AM
  Playback Speed Playback Speed
Press the selector left or right  to adjust playback speed.  Speed is 
shown by the number of arrows ( M or N).Arrow
STOP PAUSE
5m42s5m42s
 
Q  Do not cover the speaker during playback. 
						

							68
 Connections Connections
 Viewing Pictures on High-Defi  nition TVs Viewing Pictures on High-Defi nition TVs
The camera can be connected to High-Defi nition (HD) devices using an HDMI 
cable (available separately from third-party sources).
 1  Turn the camera off   and connect the HDMI cable as shown below.
Insert into HDMI 
connector Insert into HDMI 
connector
 
Q When connecting cables, be sure the connectors are fully inserted.
 
R When an HDMI cable is connected, pictures and sound are played back on the TV.
 2 Tune the television to the HDMI input channel. See the documentation 
supplied with the television for details.
 3 Press the  a button for about a second to turn the camera on.  The camera 
monitor turns off    and pictures and movies are played back on the TV.  Note 
that the camera volume controls have no eff ect on sounds played on the 
TV; use the television volume controls to adjust the volume.
 
R The USB cable can not be used while an HDMI cable is connected.
 
R Some televisions may briefl  y display a black screen when movie playback begins. 
						

							69Connections
 Printing Pictures via USB Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected 
directly to the printer as shown below and pictures can be printed 
without fi rst being copied to a computer.  Note that depending on 
the printer, not all the functions described below may be supported.
 1  Connect the supplied USB cable as shown and turn the printer on.
 2  Turn the camera on.
 3  Press the selector left or right to display a picture you wish to print.
 4  Press the selector up or down to choose the number of copies (up to 99).
 5 Repeat steps 3–4 to select additional pictures.  Press MENU/OK to display a 
confi rmation dialog when settings are complete. 
						

							70Connections
Printing Pictures via USB
 6 Press MENU/OK to start printing.  Printing can be interrupted by pressing 
DISP/BACK, but note that some printers may not respond immediately. If the 
printer stops before printing is complete, turn the camera off    and then on 
again.
 7  After confi rming that  PRINTING has cleared from the camera display, turn 
the camera off   and disconnect the USB csable.
 
R Pictures can be printed from internal memory or a memory card that has been 
formatted in the camera.
 
R If no pictures are selected, the camera will print one copy of the current picture.
 
R Page size, print quality, and border selections are made using the printer.
  Printing the Date of Recording  Printing the Date of Recording
To print the date of recording on pictures, press DISP/BACK in the PictBridge display 
and select PRINT WITH DATE 
s in the PictBridge menu (to print pictures without 
the date of recording, select PRINT WITHOUT DATE).  Some printers do not support 
date printing.  See the printer manual for details. 
						

							71Connections
Printing Pictures via USB
 Printing the DPOF Print Order Printing the DPOF Print Order
The K PRINT ORDER (DPOF) option can be used to create a digital “print 
order” for PictBridge-compatible printers (P 69) or devices that support DPOF. 
  DPOF DPOF
DPOF (Digital  Print Order  Format) is a standard that allows pictures to be 
printed from “print orders” stored in internal memory or on a memory card.  
The information in the order includes the pictures to be printed and the 
number of copies of each picture.
 1  Select playback mode and press MENU/OK to display the playback menu.
 2 Highlight  K PRINT ORDER (DPOF) and press MENU/OK.
 3  Highlight one of the following options and press  MENU/OK:
•  WITH DATE s: Print the date of recording on pictures.
•  WITHOUT DATE: Do not print the date of recording on pictures.
 
R Some printers do not support date printing.  See the printer manual for details.
 4 Press the selector left or right to display a picture you wish to add to or 
remove from the print order. 
						

							72Connections
Printing Pictures via USB
 5 Press the selector up or down to choose the number of copies (up to 99). To remove a picture from the print order, press the selector down until the 
number of copies is zero.
 6 Repeat Steps 4 – 5 to complete the print order and press  MENU/OK when 
settings are complete.
 7 A confi rmation dialog will be displayed. Press MENU/OK to save the print  order.
 
R Remove the memory card to create or modify a print order for the pictures in 
internal memory.
 
R Print orders can contain a maximum of 999 pictures.
 
R If a memory card is inserted containing a print order created by another camera, 
a message will be displayed.  Create a new print order as described above. 
						

							73Connections
 Viewing Pictures on a Computer Viewing Pictures on a Computer
The supplied software can be used to copy pictures to a computer, where 
they can be stored, viewed, organized, and printed.  Before proceeding, install 
the software as described below.  Do 
NOT connect the camera to the computer 
until installation is complete .
Windows: Installing MyFinePix StudioWindows: Installing MyFinePix Studio
 1  Confi rm that the computer meets the following system requirements:
Windows 8/Windows 7 (SP 1)/Windows 8/Windows 7 (SP 1)/Windows Vista (SP 2) Windows Vista (SP 2) 11Windows XP (SP 3) Windows XP (SP 3) 11
CPUCPU3 GHz Pentium 4 or better3 GHz Pentium 4 or better(2.4(2.4 GHz Core 2 Duo or better) GHz Core 2 Duo or better) 222 GHz Pentium 4 or better2 GHz Pentium 4 or better(2.4(2.4 GHz Core 2 Duo or better) GHz Core 2 Duo or better) 22
RAMRAM1 GB or more1 GB or more512 MB or more512 MB or more(1(1 GB or more) GB or more) 22
Free disk spaceFree disk space2 GB or more2 GB or more
GPUGPUSupports DirectX 9 or laterSupports DirectX 9 or later((recommendedrecommended))Supports DirectX 7 or laterSupports DirectX 7 or later((required; performance not guaranteed with other GPUsrequired; performance not guaranteed with other GPUs))
VideoVideo1,024 × 768 pixels or more with 24-bit color or better
OtherOther • Built-in USB port recommended.  Operation is not guaranteed with other 
USB ports.
•  .NET Framework 3.5 Service Pack 1 required when uploading images or us- ing Map Viewer.
•  Internet connection (broadband recommended) required to install  .NET Framework (if necessary), to use auto update feature, and when per-
forming such tasks as sharing pictures on-line or via e-mail.
1  Other versions of Windows are not supported.  Only pre-installed operating systems are  supported; operation is not guaranteed on home-built computers or computers that have 
been upgraded from earlier versions of Windows.
2  Recommended when displaying HD movies. 
						

							74Connections
Viewing Pictures on a Computer
 2 Start the computer.  Log in to an account with administrator privileges before proceeding.
 3 Exit any applications that may be running and insert the installer CD in a CD-ROM drive.
  Windows 8/Windows 7/Windows Vista  Windows 8/Windows 7/Windows Vista
If an AutoPlay dialog is displayed, click SETUP.EXE.  A “User Account Control” dia-
log will then be displayed; click  Ye s ( Windows 8/Windows 7) or  Allow ( Windows 
Vista).
The installer will start automatically; click Install MyFinePix Studio  and 
follow the on-screen instructions to install MyFinePix Studio and RAW FILE 
CONVERTER.
  If the Installer Does Not Start Automatically  If the Installer Does Not Start Automatically
If the installer does not start automatically, select Computer or My Computer 
from the Start menu, then double-click the FINEPIX CD icon to open the FINEPIX 
CD window and double-click  setup or SETUP.EXE.
  If the Installer Does Not Start Automatically (Windows 8)  If the Installer Does Not Start Automatically (Windows 8)
1 Select Desktop on the Start screen.
2 Select File Explorer on the taskbar.
3 Select Computer in the navigation pane.
4  Double-click the drive icon inserting the FINEPIX CD and follow the on-screen instruc-
tions to install. 
						

							75Connections
Viewing Pictures on a Computer
 4 If prompted to install Windows Media Player or DirectX, follow the on-screen instructions to complete installation.
 5  Remove the installer CD from the CD-ROM drive when installation is com-plete.  Store the installer CD in a dry location out of direct sunlight in case 
you need to re-install the software.
Installation is now complete.  Proceed to “Connecting the Camera” ( P 78). 
						

							76Connections
Viewing Pictures on a Computer
Macintosh: Installing RAW FILE CONVERTERMacintosh: Installing RAW FILE CONVERTER
RAW FILE CONVERTER is used to view RAW images on your computer.
 1  Confi rm that the computer meets the following system requirements:
CPUCPUIntel (Core 2 Duo or better)
OSOSPre-installed copies of Mac OS X version 10.6–10.8 (visit http://www.fujifilm.
com/support/digital_cameras/compatibility/ for more information).
RAMRAM
1 GB or more
Free disk spaceFree disk space A minimum of 200 MB required for installation with 400 MB available when 
RAW FILE CONVERTER is running
VideoVideo
1,024 × 768 pixels or more with 24-bit color or better
 2 After starting the computer and quitting any applications that may 
be running, insert the installer CD in a CD-ROM drive and double-click 
SILKYRFCEXInstaller.
 3  Enter an administrator name and password when prompted and click  OK, 
then follow the on-screen instructions to install.  Click  Exit to quit the in-
staller when installation is complete.