Fujifilm Camera Finepix F900exr Owners Manual

							Owner’s Manual
Thank you for your purchase 
of this product.  This manual 
describes how to use your 
FUJIFILM digital camera and the 
supplied software.  Be sure that 
you have read and understood 
its contents and the warnings in 
“For Your Safety” (P ii) before us-
ing the camera.
For information on related products, visit our website at
http://www.fujifilm.com/products/digital_cameras/index.html
EN
Before You Begin
First Steps
Basic Photography and Playback
More on Photography
More on Playback
Wireless Networks
Movies
Connections
Menus
Technical Notes
Troubleshooting
BL03101-101
Appendix 
						

							ii
 For Your Safety For  Your  Safety
• Read Instructions : All the safety and operat-
ing instructions should be read before the 
appliance is operated .
•  Retain Instructions: The safety and operating 
instructions should be retained for future 
reference.
•  Heed Warnings : All warnings on the ap-
pliance and in the operating instructions 
should be adhered to.
•  Follow Instructions: All operating and use 
instructions should be followed.
InstallationInstallation
Power Sources : This video product should be 
operated only from the type of power source 
indicated on the marking label.  If you are 
not sure of the type of power supply to your 
home, consult your appliance dealer or local 
power company.  For video products intend-
ed to operate from battery power, or other 
sources, refer to the operating instructions.
Grounding or Polarization: This video product 
is equipped with a polarized alternating-
current line plug (a plug having one blade 
wider than the other).  This plug will fi t into 
the power outlet only one way.  This is a safety 
feature.  If you are unable to insert the plug 
fully into the outlet, try reversing the plug.  If 
the plug should still fail to fi t, contact your 
electrician to replace your obsolete outlet.  
Do not defeat the safety purpose of the po-
larized plug. Alternate Warnings: This video product is 
equipped with a three-wire grounding-type 
plug, a plug having a third (grounding) pin.  
This plug will only fi t into a grounding-type 
power outlet.  This is a safety feature.  If you 
are unable to insert the plug into the outlet, 
contact your electrician to replace your obso-
lete outlet.  Do not defeat the safety purpose 
of the grounding type plug.
Overloading: Do not overload wall outlets and 
extension cords as this can result in a risk of 
fi re or electric shock.
Ventilation: Slots and openings in the cabinet 
are provided for ventilation, to ensure reliable 
operation of the video product and to pro-
tect it from overheating, and these openings 
must not be blocked or covered.  The open-
ings should never be blocked by placing the 
video product on a bed, sofa, rug, or other 
similar surface.
This video product should not be placed in a 
built-in installation such as a bookcase or rack 
unless proper ventilation is provided or the 
manufacturer’s instructions have been ad-
hered to.  This video product should never be 
placed near or over a radiator or heat register.
Attachments: Do not use attachments not 
recommended by the video product manu-
facturer as they may cause hazards.
Water and Moisture: Do not use this video 
product near water—for example, near a 
bath tub, wash bowl, kitchen sink, or laundry 
tub, in a wet basement, or near a swimming 
pool, and the like.Power-Cord Protection
: Power-supply cords 
should be routed so that they are not likely 
to be walked on or pinched by items placed 
upon or against them, paying particular 
attention to cords at plugs, convenience re-
ceptacles, and the point where they exit from 
the appliance.
Accessories: Do not place this video product 
on an unstable cart, stand, tripod, bracket, or 
table.  The video product may fall, causing 
serious injury to a child or adult, and serious 
damage to the appliance.  Use only with a 
cart, stand, tripod, bracket, or table recom-
mended by the manufacturer, or sold with 
the video product.  Any mounting of the ap-
pliance should follow the manufacturer’s in-
structions, and should use a mounting acces-
sory recommended by the manufacturer.
An appliance and cart 
combination should 
be moved with care.  
Quick stops, exces-
sive force, and uneven 
surfaces may cause 
the appliance and cart 
combination to overturn.
IMPORTANT SAFETY INSTRUCTIONS 
						

							iii
For Your Safety
AntennasAntennas
Outdoor Antenna Grounding: If an outside 
antenna or cable system is connected to the 
video product, be sure the antenna or cable 
system is grounded so as to provide some 
protection against voltage surges and built-
up static charges.  Section 810 of the National 
Electrical Code, ANSI/NFPA No. 70, provides 
information with respect to proper ground-
ing of the mast and supporting structure, 
grounding of the lead-in wire to an antenna 
discharge unit, size of grounding conductors, 
location of antenna discharge unit, connec-
tion to grounding electrodes, and require-
ments for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER  NATIONAL ELECTRICAL CODE
Antenna Lead 
in Wire
Ground Clamp
Grounding 
Conductors 
(NEC SECTION 
810-21)
Power Service Grounding 
Electrode System (NEC ART 
250. PART H) Antenna 
Discharge Unit 
(NEC SECTION 
810-20)
Electric Service 
Equipment
Ground Clamps
Power Lines: An outside antenna system 
should not be located in the vicinity of over-
head power lines or other electric light or 
power circuits, or where it can fall into such 
power lines or circuits.  When installing an 
outside antenna system, extreme care should 
be taken to keep from touching such power 
lines or circuits as contact with them might 
be fatal.
UseUse
Cleaning: Unplug this video product from the 
wall outlet before cleaning.  Do not use liq-
uid cleaners or aerosol cleaners.  Use a damp 
cloth for cleaning.
Object and Liquid Entry: Never push objects 
of any kind into this video product through 
openings as they may touch dangerous volt-
age points or short out parts that could result 
in a fi re or electric shock.  Never spill liquid of 
any kind on the video product.
Lightning: For added protection for this video 
product receiver during a lightning storm, or 
when it is left unattended and unused for 
long periods of time, unplug it from the wall 
outlet and disconnect the antenna or cable 
system.  This will prevent damage to the 
video product due to lightning and power-
line surges.
ServiceService
Servicing: Do not attempt to service this video 
product yourself as opening or removing cov-
ers may expose you to dangerous voltage or 
other hazards.  Refer all servicing to qualifi ed 
service personnel.
Damage Requiring Service: Unplug this video 
product from the wall outlet and refer servic-
ing to qualifi ed service personnel under the 
following conditions:
• When the power-supply cord or plug is  damaged.
• If liquid has been spilled, or objects have  fallen into the video product.
• If the video product has been exposed to  rain or water.
• If the video product has been dropped or  the cabinet has been damaged.
If the video product does not operate nor- mally follow the operating instructions.  Ad-
just only those controls that are covered by 
the operating instructions as an improper 
adjustment of other controls may result in 
damage and will often require extensive work 
by a qualifi ed technician to restore the video 
product to its normal operation.
When the video product exhibits a distinct 
change in performance—this indicates a 
need for service.
Replacement Parts: When replacement parts 
are required, be sure the service technician 
has used replacement parts specifi ed by the 
manufacturer or have the same characteris-
tics as the original part.  Unauthorized sub-
stitutions may result in fi re, electric shock or 
other hazards.
Safety Check
: Upon completion of any service 
or repairs to this video product, ask the ser-
vice technician to perform safety checks to 
determine that the video product is in proper 
operating condition. 
						

							iv
For Your Safety
Be sure to read these notes before use
Safety Notes• Make sure that you use your camera correctly.  Read these safety notes and your Owner’s Manual carefully before use.
•  After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indicate the 
severity of the injury or damage that can result if the information 
indicated by the icon is ignored and the product is used incorrectly 
as a result.
WARNING This icon indicates that death or serious injury can result if the 
information is ignored.
CAUTIONThis icon indicates that personal injury or material damage can 
result if the information is ignored.The icons shown below are used to indicate the nature of the instruc-
tions which are to be observed.
Triangular icons tell you that this information requires atten-
tion (“Important”).
Circular icons with a diagonal bar tell you that the action indi-
cated is prohibited (“Prohibited”).
Filled circles with an exclamation mark indicate an action that 
must be performed (“Required”).
  WARNINGWARNING
Unplug from 
power socket
If a problem arises, turn the camera off  , remove the battery, and 
disconnect and unplug the AC power adapter.   Continued use of 
the camera when it is emitting smoke, is emitting any unusual 
odor, or is in any other abnormal state can cause a fi re or elec-
tric shock.  Contact your FUJIFILM dealer.
Avoid exposure  to water
Do not allow water or foreign objects to enter the camera.   If water 
or foreign objects get inside the camera, turn the camera off  , 
remove the battery, and disconnect and unplug the AC power 
adapter.  Continued use of the camera can cause a fi re or elec-
tric shock.  Contact your FUJIFILM dealer.
  WARNINGWARNING
Do not use in 
the bathroom or  showerDo not use the camera in the bathroom or shower.   This can cause 
a fi re or electric shock.
Do not 
disassemble
Never attempt to change or take apart the camera (never open 
the case).   Failure to observe this precaution can cause fi re or 
electric shock.
Do not touch 
internal parts
Should the case break open as the result of a fall or other accident, 
do not touch the exposed parts.   Failure to observe this precau-
tion could result in electric shock or in injury from touching the 
damaged parts.  Remove the battery immediately, taking care 
to avoid injury or electric shock, and take the product to the 
point of purchase for consultation.
Do not change, heat or unduly twist or pull the connection cord and 
do not place heavy objects on the connection cord.  These actions 
could damage the cord and cause a fi  re or electric shock.  If the 
cord is damaged, contact your FUJIFILM dealer.
Do not place the camera on an unstable surface.   This can cause the 
camera to fall or tip over and cause injury.
Never attempt to take pictures while in motion.   Do not use the 
camera while you are walking or driving a vehicle.  This can re-
sult in you falling down or being involved in a traffi   c accident.
Do not touch any metal parts of the camera during a thunderstorm.   
This can cause an electric shock due to induced current from 
the lightning discharge.
Do not use the battery except as specifi ed.   Load the battery as 
shown by the indicator.
Do not heat, change or take apart the battery. Do not drop or subject 
the battery to impacts. Do not store the battery with metallic prod-
ucts.  Any of these actions can cause the battery to burst or leak 
and cause fi re or injury as a result.
Use only the battery or AC power adapters specifi  ed for use with this 
camera.  Do not use voltages other than the power supply voltage 
shown.  The use of other power sources can cause a fi re.
If the battery leaks and fl  uid gets in contact with your eyes, skin or 
clothing, fl  ush the aff   ected area with clean water and seek medical 
attention or call an emergency number right away. 
						

							v
For Your Safety
  WARNINGWARNINGDo not use the charger to charge batteries other than those specifi ed 
here.  The supplied battery charger is for use only with the type of 
battery supplied with the camera.  Using the charger to charge 
conventional batteries or other types of rechargeable batteries 
can cause the battery to leak fl uid, overheat or burst.
Danger of explosion if battery is incorrectly replaced. Replace only 
with the same or equivalent type.
Do not use in the presence of fl ammable objects, explosive gases, 
or dust.
When carrying the battery, install it in a digital camera or keep it 
in the hard case. When storing the battery, keep it in the hard case. 
When discarding, cover the battery terminals with insulation tape.  
Contact with other metallic objects or batteries could cause 
the battery to ignite or burst.
Keep memory cards out of the reach of small children.  Because 
memory cards are small, they can be swallowed by children.  
Be sure to store memory cards out of the reach of small chil-
dren.  If a child swallows a memory card, seek medical atten-
tion or call an emergency number.
Turn the camera off    in crowds.  The camera emits radio-frequency 
radiation that may interfere with pacemakers. 
Turn the camera off    in the vicinity of automatic doors, public address 
systems, and other automatically controlled devices.   The camera 
emits radio-frequency radiation that may cause these devices 
to malfunction. 
Keep the camera at least 22  cm away from people wearing pace-
makers.  The camera emits radio-frequency radiation that may 
interfere with pacemakers.
  CAUTIONCAUTIONDo not use this camera in locations aff   ected by oil fumes, steam, hu-
midity or dust.  This can cause a fi re or electric shock.
Do not leave this camera in places subject to extremely high temper-
atures.  Do not leave the camera in locations such as a sealed 
vehicle or in direct sunlight.  This can cause a fi re.
Keep out of the reach of small children.  This product could cause 
injury in the hands of a child.
  CAUTIONCAUTIONDo not place heavy objects on the camera.   This can cause the 
heavy object to tip over or fall and cause injury.
Do not move the camera while the AC power adapter is still connect-
ed. Do not pull on the connection cord to disconnect the AC power 
adapter.  This can damage the power cord or cables and cause 
a fi re or electric shock.
Do not use the AC power adapter when the plug is damaged or the 
plug socket connection is loose.   This could cause a fi re or electric 
shock.
Do not cover or wrap the camera or the AC power adapter in a cloth 
or blanket.  This can cause heat to build up and distort the cas-
ing or cause a fi re.
When you are cleaning the camera or you do not plan to use the 
camera for an extended period, remove the battery and disconnect 
and unplug the AC power adapter.  Failure to do so can cause a 
fi re or electric shock.
Unplug from 
power socket
When charging ends, unplug the charger from the power socket.  
Leaving the charger plugged into the power socket can cause 
a fi re.
Using a fl  ash too close to a person’s eyes may temporarily aff  ect the 
eyesight.  Take particular care when photographing infants and 
young children.
When a memory card is removed, the card could come out of the slot 
too quickly.  Use your fi nger to hold it and gently release the card.   
Injury could result to those struck by the ejected card.
Request regular internal testing and cleaning for your camera.   
Build-up of dust in your camera can cause a fi re or electric 
shock.  Contact your FUJIFILM dealer to request internal clean-
ing every two years.  Please note that this service is not free 
of charge.
Remove your fi ngers from the fl ash window before the fl ash fi res.  
Failure to observe this precaution could result in burns.
Keep the fl  ash window clean and do not use the fl  ash if the window 
is obstructed. Failure to observe these precautions could cause 
smoke or discoloration. 
						

							vi
For Your Safety
 The Battery and Power Supply
Note : Check the type of battery used in 
your camera and read the appropriate 
sections.
The following describes the proper use of 
batteries and how to prolong their life.  Incor-
rect use can shorten battery life or cause leak-
age, overheating, fi re, or explosion.
Li-ion BatteriesLi-ion Batteries
Read this section if your camera uses a 
rechargeable Li-ion battery.
The battery is not charged at shipment.  
Charge the battery before use.  Keep the bat-
tery in its case when not in use.
 
■ Notes on the Battery
The battery gradually loses its charge when 
not in use.  Charge the battery one or two 
days before use.
Battery life can be extended by turning the 
camera off   when not in use.
Battery capacity decreases at low tempera-
tures; a depleted battery may not function at 
when cold.  Keep a fully charged spare bat-
tery in a warm place and exchange as nec-
essary, or keep the battery in your pocket or 
other warm place and insert it in the camera 
only when shooting.  Do not place the bat-
tery in direct contact with hand warmers or 
other heating devices.  
■  Charging the Battery
Charge the battery in the supplied battery 
charger.  Charging times will increase at am-
bient temperatures below +10 °C (+50 °F) or 
above +35 °C (+95 °F).  Do not attempt to 
charge the battery at temperatures above 
40 °C (+104 °F); at temperatures below 0 °C 
(+32 °F), the battery will not charge.
Do not attempt to recharge a fully charged 
battery.  The battery does not however need 
to be fully discharged before charging.
The battery may be warm to the touch imme-
diately after charging or use.  This is normal.
 
■ Battery Life
At normal temperatures, the battery can be 
recharged about 300 times.  A noticeable de-
crease in the length of time the battery will 
hold a charge indicates that it has reached 
the end of its service life and should be re-
placed.
 
■ Storage
Performance may be impaired if the battery is 
left unused for extended periods when fully 
charged.  Run the battery fl  at before storing it.
If the camera will not be used for an extended 
period, remove the battery and store it in a 
dry place with an ambient temperature of 
from +15 °C to +25 °C (+59 °F to +77 °F).  Do 
not store in locations exposed to extremes of 
temperature.  
■ Cautions: Handling the Battery
•  Do not transport or store with metal objects  such as necklaces or hairpins.
•  Do not expose to fl ame or heat.
•  Do not disassemble or modify.
•  Use with designated chargers only.
• Do not drop or subject to strong physical  shocks.
•  Do not expose to water.
•  Keep the terminals clean.
•  The battery and camera body may become  warm to the touch after extended use.  This 
is normal.
AA Alkaline/Rechargeable Ni-MH Batteries/AA Alkaline/Rechargeable Ni-MH Batteries/AA lithium batteriesAA lithium batteries
Read this section if your camera uses AA 
alkaline or rechargeable AA Ni-MH bat-
teries.  Information on compatible battery 
types may be found elsewhere in the camera 
manual.
 
■ Cautions: Handling the Batteries
• Do not expose to water, fl ame, or heat, or  store in warm or humid conditions.
•  Do not transport or store with metal objects  such as necklaces or hairpins.
•  Do not disassemble or modify the batteries  or battery casing.
•  Do not subject to strong physical shocks.
• Do not use batteries that are leaking, de- formed, or discolored.
•  Keep out of reach of infants and small chil- dren.
•  Insert in the correct orientation. 
						

							vii
For Your Safety
•  Do not mix old and new batteries, batteries with diff  erent charge levels, or batteries of 
diff  erent types.
•  If the camera will not be used for an extend- ed period, remove the batteries.  Note that 
the camera clock will be reset.
• The batteries may be warm to the touch  immediately after use.  Turn the camera 
off  and allow the batteries to cool before 
handling.
• Battery capacity tends to decrease at low  temperatures.  Keep spare batteries in a 
pocket or other warm place and exchange 
as necessary.  Cold batteries may recover 
some of their charge when warmed.
•  Fingerprints and other stains on the battery  terminals can impair battery performance.  
Thoroughly clean the terminals with a 
soft, dry cloth before inserting them in the 
camera.
If the batteries leak, clean the battery 
compartment thoroughly before in-
serting new batteries.
If fl uid from the battery comes into 
contact with skin or clothing, fl ush 
the aff  ected area with water.   If fl uid 
enters your eyes, immediately fl ush the 
aff  ected area with water and seek 
medical attention.  Do not rub your eyes.  
Failure to observe this precaution could 
result in permanent visual impairment.  
■ Ni-MH Batteries
The capacity of Ni-MH batteries may be 
temporarily reduced when new, after long 
periods of disuse, or if they are repeatedly 
recharged before being fully discharged.  This 
is normal and does not indicate a malfunc-
tion.  Capacity can be increased by repeatedly 
discharging the batteries using the discharge 
option in the camera setup menu and re-
charging them using a battery charger.
 
Q CAUTION: Do not use the discharge option 
with alkaline batteries.
The camera draws a small amount of current 
even when off  .  Ni-MH batteries that have 
been left in the camera for an extended pe-
riod may be drawn down to the point that 
they no longer hold a charge.  Battery perfor-
mance may also drop if the batteries are run 
down in a device such as a fl ashlight.  Use the 
discharge option in the camera setup menu 
to discharge Ni-MH batteries.  Batteries that 
no longer hold a charge even after repeat-
edly being discharged and recharged have 
reached the end of their service life and must 
be replaced.
Ni-MH batteries can be recharged in a bat-
tery charger (sold separately).  Batteries may 
become warm to the touch after charging.  
Refer to the instructions provided with the 
charger for more information.  Use the char-
ger with compatible batteries only.
Ni-MH batteries gradually lose their charge 
when not in use.
 
■ Disposal
Dispose of used batteries in accord with local 
regulations.
AC Power Adapters (Available Separately)AC Power Adapters (Available Separately)
This section applies to all camera models.   
Use only FUJIFILM AC power adapters desig-
nated for use with this camera.  Other adapt-
ers could damage the camera.
•  The AC power adapter is for indoor use only.
•  Be sure the DC plug is securely connected  to the camera.
• Turn the camera off  before disconnecting  the adapter.  Disconnect the adapter by the 
plug, not the cable.
•  Do not use with other devices.
•  Do not disassemble.
•  Do not expose to high heat and humidity.
•  Do not subject to strong physical shocks.
•  The adapter may hum or become hot to the  touch during use.  This is normal.
• If the adapter causes radio interference,  reorient or relocate the receiving antenna. 
						

							viii
For Your Safety
Using the Camera
Do not aim the camera at extremely bright 
light sources, such as the sun in a cloudless 
sky.  Failure to observe this precaution could 
damage the camera image sensor.
Take Test ShotsTake Test Shots
Before taking photographs on important 
occasions (such as at weddings or before 
taking the camera on a trip), take a test shot 
and view the result in the LCD monitor to en-
sure that the camera is functioning normally.  
FUJIFILM Corporation can not accept liability 
for damages or lost profi ts incurred as a result 
of product malfunction.
Notes on CopyrightNotes on Copyright
Unless intended solely for personal use, imag-
es recorded using your digital camera system 
cannot be used in ways that infringe copy-
right laws without the consent of the owner.  
Note that some restrictions apply to the 
photographing of stage performances, enter-
tainments, and exhibits, even when intended 
purely for personal use.  Users are also asked 
to note that the transfer of memory cards 
containing images or data protected under 
copyright laws is only permissible within the 
restrictions imposed by those copyright laws.
HandlingHandling
To ensure that images are recorded correctly, 
do not subject the camera to impact or physi-
cal shocks while images are being recorded.
Liquid CrystalLiquid Crystal
In the event that the LCD monitor is damaged, 
care should be taken to avoid contact with liq-
uid crystal.  Take the urgent action indicated 
should any of the following situations arise:
•  If liquid crystal comes in contact with your 
skin, clean the area with a cloth and then 
wash thoroughly with soap and running 
water.
•  If liquid crystal enters your eyes , fl ush the af-
fected eye with clean water for at least 15 
minutes and then seek medical assistance.
•  If liquid crystal is swallowed , rinse your 
mouth thoroughly with water.  Drink large 
quantities of water and induce vomiting, 
then seek medical assistance.
Although the display is manufactured using 
extremely high-precision technology, it may 
contain pixels that are always lit or that do not  
light. This is not a malfunction, and images re-
corded with the product are unaff  ected.
Trademark InformationTrademark InformationxD-Picture Card and E are trademarks of 
FUJIFILM Corporation.  The typefaces included 
herein are solely developed by DynaComware 
Taiwan Inc.  Macintosh, QuickTime, and Mac 
OS are trademarks of Apple Inc. in the U.S.A. 
and other countries.  Windows 8, Windows 7, 
Windows Vista, and the Windows logo 
are trademarks of the Microsoft group of 
companies.  Wi-Fi® and Wi-Fi Protected Setup® 
are registered trademarks of the Wi-Fi Alliance.  
Adobe and Adobe Reader are either 
trademarks or registered trademarks of Adobe 
Systems Incorporated in the U.S.A. and/or 
other countries.  The SDHC and SDXC logos 
are trademarks of SD-3C, LLC.  The HDMI logo 
is a trademark.  YouTube is a trademark of 
Google Inc.  All other trade names mentioned  in this manual are the trademarks or registered 
trademarks of their respective owners.
Electrical InterferenceElectrical Interference
This camera may interfere with hospital or 
aviation equipment.  Consult with hospital 
or airline staff   before using the camera in a 
hospital or on an aircraft.
Exif Print (Exif Version 2.3)Exif Print (Exif Version 2.3)
Exif Print is a newly revised digital camera fi le 
format in which information stored with pho-
tographs is used for optimal color reproduc-
tion during printing.
 IMPORTANT  NOTICE:
Read Before Using the Software
Direct or indirect export, in whole or in part, 
of licensed software without the permission 
of the applicable governing bodies is pro-
hibited. 
						

							ix
For Your Safety
IMPORTANT: Read the following notices before using the camera’s 
built-in wireless transmitter.
 
Q This product, which contains encryption function developed in 
the United States, is controlled by the United States Export Admin-
istration Regulations and may not be exported or re-exported to 
any country to which the United States embargoes goods.
•  Use only as part of a wireless network.   FUJIFILM does not accept li-
ability for damages resulting from unauthorized use.  Do not use 
in applications requiring a high degree of reliability, for example 
in medical devices or other systems that may directly or indirectly 
impact human life.  When using the device in computer and other 
systems that demand a greater degree of reliability than wireless 
networks, be sure to take all necessary precautions to ensure safety 
and prevent malfunction.
•  Use only in the country in which the device was purchased.   This device 
conforms to regulations governing wireless network devices in the 
country in which it was purchased.  Observe all location regulations 
when using the device.  FUJIFILM does not accept liability for prob-
lems arising from use in other jurisdictions.
•  Wireless data (images) may be intercepted by third parties.   The security 
of data transmitted over wireless networks is not guaranteed.
•  Do not use the device in locations subject to magnetic fi  elds, static electric-
ity, or radio interference.   Do not use the transmitter in the vicinity of 
microwave ovens or in other locations subject to magnetic fi elds, 
static electricity, or radio interfer ence that may prevent reception of 
wireless signals.  Mutual interference may occur when the transmit-
ter is used in the vicinity of other wireless devices operating in the 
2.4 GHz band.
•  The wireless transmitter operates in the 2.4  GHz band using DSSS and 
OFDM modulation.Wireless Network Devices: Cautions
•  This device operates on the same frequency as commercial, educational, 
and medical devices and wireless transmitters.  It also operates on the 
same frequency as licensed transmitters and special unlicensed low-
voltage transmitters used in RFID tracking systems for assembly lines 
and in other similar applications.
•  To prevent interference with the above devices, observe the following 
precautions.  Confi rm that the RFID transmitter is not in opera-
tion before using this device.  Should you observe that the device 
causes interference in licensed transmitters used for RFID tracking, 
immediately choose a new operating frequency for this device to 
prevent additional interference.  If you notice that this device causes 
interference in low-voltage RFID  tracing systems, contact a FUJIFILM 
representative.
2.4DS/OF4This sticker indicates that this device 
operates in the 2.4 GHz band using DSSS 
and OFDM modulation and may cause 
interference at distances of up to 40 m. 
						

							x
About This ManualAbout This Manual
Before using the camera, read this manual and the warnings in “For Your Safe-
ty” (
P ii).  For information on specifi c topics, consult the sources below.
Table of ContentsTable of Contents ............................ ............................PP xii xiiTroubleshootingTroubleshooting .......................... ..........................PP 113 113
The “ Table of Contents” gives an over-
view of the entire manual.  The princi-
pal camera operations are listed here.Having a specifi c problem with the 
camera?  Find the answer here.
Warning Messages and DisplaysWarning Messages and Displays  ... ...PP 120 120
Find out what’s behind that fl ashing 
icon or error message in the display.
  Memory Cards Memory Cards
Pictures can be stored in the camera’s internal memory or on optional SD, SDHC, and 
SDXC memory cards (P 13), referred to in this manual as “memory cards.”
    Temperature Warning Temperature Warning
The camera will turn off   automatically before its temperature or the temperature 
of the battery rise above safe limits.  Pictures taken when a temperature warning is 
displayed may exhibit higher levels of “noise” (mottling). Turn the camera off    and wait 
for it to cool before turning it on again.