Home > Flir > Thermovision > Flir ThermovisionVoyager III Installation Guide

Flir ThermovisionVoyager III Installation Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Flir ThermovisionVoyager III Installation Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 33 Flir manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							432-0005-00-12 Rev 100 — Voyager III Installation Guide 29
    Specifications
    System Overview 
    Table 2.3 lists general characteristics of your Voyager III system.
    Ethernet CableDouble Shielded, RJ45, LSZH, 25’
    Double Shielded, RJ45, LSZH, 50’
    Double Shielded, RJ45, LSZH, 75’
    Double Shielded, RJ45, LSZH, 100’ 308-0163-25
    308-0163-50
    308-0163-75
    308-0163-100
    Video Cable BNC Terminated, 25’
    BNC Terminated, 50’
    BNC Terminated, 75’
    BNC Terminated, 100’ 308-0164-25
    308-0164-50
    308-0164-75
    308-0164-100
    Power Accessory Injector – DC/DC PoE 4113746
    TABLE 2.3  Voyager III Overview
    Attribute Value
    General
    Size 15” x 23”
    Weight 45 lb.
    Azimuth Field-of-Regard 360° Continuous
    Elevation Field-of-Regard +/-90°
    Slew Rate Variable to 120°/sec.
    Thermal Imaging Performance
    Sensor Type 2 Microbolometer Cameras
    Wide FOV Imager 20° x 15° (35mm) 
    Narrow FOV Imager 5° x 3.75° (140mm)
    Spectral Range 7.5 to 13.5 m
    Daylight Imaging Performance
    Sensor Type 1/4” Super HAD
    Wide FOV Limit 42° horiz. @ F1.6
    Narrow FOV Limit 1.6° horiz. @ F3.8
    System Specifications
    Pan/Tilt Coverage 360° Az./ +/-90° El.
    Video output NTSC or PAL
    Power Requirements 24VDC
    TABLE 2.2  Voyager III Accessories
    Accessories Description Part Number 
    						
    							External Standards
    30432-0005-00-12 Rev 100 — Voyager III Installation Guide 
    External Standards
    Table 2.4 lists other sources of information and standards definitions that may be 
    useful during the installation of your Voyager III camera.
    Environmental
    Operating Temp. Range -28°C to 55°C
    Non-Operating Temp. Range -50°C to 85°C
    Vibration Per MIL-STD-810
    TABLE 2.4  External References
    Standard Description
    ANSI/SCTE 01 2006 “F” 
    Port, Female, Outdoor  http://www.scte.org
    IEC  60169-24 Radio-frequency coaxial connectors with screw coupling,  typically for use in 75 Ohm cable distribution systems 
    (Type F).
    IEC  60945  Maritime navigation and radio communication equipment  and systems general requirements
    IEC 60529  Degrees of Protection Provided by Enclosures (IPX6)
    IEC 60068  Basic Environmental Testing Procedures, Part 2: Tests
    89/336/EEC  Electromagnetic Compatibility (EMC) directive
    Directive 2002/95/EC  Restriction of the us e of certain hazardous substances in 
    electrical and electronic equipment (European Union)
    Directive 2002/96/EC  Waste Electrical  and Electronic Equipment Reg. 2006
    TIA/EIA T568B  CAT5/RJ-45 wiring standard
    IEEE 802.3 / IEEE 802.3u  10Base-T/100Base-TX Ethernet
    IEEE 802.3af    Power over Ethe rnet (PoE) standard (48V/400mA/
    15.4W)
    ANSI/SMPTE 170M - 1994  Composite Anal og Video Signal (Supersedes RS-170A)
    Directive 96/98/EC  Marine Electronics Directive (MED)
    TABLE 2.3  Voyager III Overview
    Attribute Value 
    						
    							432-0005-00-12 Rev 100 — Voyager III Installation Guide 31
    Acronyms
    Acronyms 
    The following table lists each acronym that is used in this manual and its meaning. 
    Installation Template
    The next page is a template for use during installation of the camera. If you print 
    this template, verify that the scale is correct before using.
    Acronym/TermDefinition
    AGC Automatic Gain Control
    ANSI American National Standards Institute 
    API Application Programming Interface
    EAR Export Administration Regulations
    EMI Electromagnetic Interference
    FFC Flat Field Correction
    FLIR Forward Looking Infrared
    ICD Interface Control Document
    IEC International Electrotechnical Commission
    IEEE Institute of Electrical and Electronics Engineers
    IP Internet Protocol
    IR Infrared
    JCU Joystick Control Unit
    LCD Liquid Crystal Display
    LWIR Long-wave infrared
    MFD Multi-function display
    NMEA National Marine Electronics Association
    P/T Pan/Tilt
    PoE Power Over Ethernet
    SCTE Society of Cable Telecommunications Engineers 
    SDK Software Developer’s Kit
    UPnP Universal Plug and Play
    VDC Volts, Direct Current
    VIS Visible 
    						
    							Installation Template
    32432-0005-00-12 Rev 100 — Voyager III Installation Guide  
    						
    							Important Note:
    PDF page size: 8.5 x11in.
    Template should print 1:1
    Due to variation in software and printers,
    please verify scales below before modifying mounting surface. FITS Voyager III PN 432-0005-XX
    2.00 in.
    Voyager III Camera Body Template
    2.00 in.
    51 mm
    51 mm 
    						
    							Installation Template
    34432-0005-00-12 Rev 100 — Voyager III Installation Guide  
    						
    							NOTES 
    						
    							FLIR Systems, Inc.
    CS World Headquarters
    FLIR Systems, Inc.
    70 Castilian Dr.
    Goleta, CA 93117
    USA
    PH:+ 1 805 964 9797
    PH:+ 1 877 773 3547 (Sales)
    PH:+ 1 888 747 3547 (Apps)
    FX: + 1 805 685 2711
    [email protected] 
    EUROPE
    CS Eurasian Headquarters
    FLIR Systems CVS BV
    Charles Petitweg 21
    4847 NW Teteringen - Breda
    Netherlands
    PH: + 31 (0) 765 79 41 94
    FX: + 31 (0) 765 79 41 99
    [email protected]
    FLIR Systems, Inc.
    Corporate Headquarters
    FLIR Systems, Inc.
    27700A SW Parkway Ave.
    Wilsonville, OR 97070
    USA 
    PH: + 1 503 498 3547
    PH: + 1 877 773 3547
    FX: + 1 503 498 3153
    [email protected] 
    						
    All Flir manuals Comments (0)

    Related Manuals for Flir ThermovisionVoyager III Installation Guide