Flir ThermovisionVoyager III Installation Guide

Voyager III
432-0005-00-12
Revision 100
September 2011
Installation Guide 

© FLIR Commercial Systems, Inc., 2011. All rights reserved worldwide. No parts of this manual, in whole or in part, may be 
copied, photocopied, translated, or transmitted to any electronic medium or machi ne readable form without the prior written 
permission of FLIR Commercial Systems, Inc.
Names and marks appearing on the products herein are either  registered trademarks or trademarks of FLIR Commercial 
Systems, Inc. and/or its subsidiaries. All other trademarks, trade names, or company names...

432-0005-00-12 Rev 100 — Voyager III Installation Guide 1
CHAPTER 1 Voyager III Installation .................................................. ............... 3
Additional References .................................................................................................................... 3
Documentation Conventions .......................................................................................................... 4
Warnings and...

Contents
2432-0005-00-12 Rev 100 — Voyager III Installation Guide  

432-0005-00-12 Rev 100 — Voyager III Installation Guide3
CHAPTER 1Voyager III Installation
This manual describes the physical mounting and electrical connection of the 
Voyager III system. If you need help or have additional questions, call to speak 
with our support experts; see the phone numbers on the back cover of this 
manual.
Voyager III is a stabilized maritime thermal and visible-light camera system for 
use on most types of vessels. Its state-of -the-art thermal imaging system provides...

Warnings and Cautions
4432-0005-00-12 Rev 100 — Voyager III Installation Guide 
•Voyager III Quick Start Guide  (FLIR Doc. # 432-0005-00-11) is a set of 
double-sided cards that show the func tions executed by the various JCU 
buttons, puck movements, and on-screen symbols. 
• Voyager III Interface Control Documents (ICD)  is a set of CAD drawings with 
detailed component dimensions, wiring schemes, and mounting dimensions. 
There are three separate ICD documents:
• FLIR Doc. # 500-0385-19 contains...

432-0005-00-12 Rev 100 — Voyager III Installation Guide 5
Installation Overview
Caution: Do not open the Voyager III camera  unit for any reason. Disassembly of 
the camera (including removal of the cover) can cause permanent damage and 
will void the warranty.
Caution:  Be careful not to leave fingerprints on the Voyager III camera optics. 
Caution:  The Voyager III requires a power supply of 24V DC nominal, 10 
Amp maximum. Absolute voltage range:  21 – 32V DC. Operating the camera 
outside of the...

Installation Planning
6432-0005-00-12 Rev 100 — Voyager III Installation Guide 
• Ethernet cables (up to 100 ft.) to connect to the bulkhead box Ship Ethernet port, rated for use with PoE devices  (IEEE802.3af), 8-conductor T568B 
Installation Planning
The following illustration shows a schemati c of a basic Voyager III installation 
with one Ethernet JCU, a NMEA conn ection, and one analog video display.
You should consider a number of factors in planning the locations for the key 
Voyager III...

432-0005-00-12 Rev 100 — Voyager III Installation Guide 7
Installation Planning
Bulkhead Box Planning
• Mount the bulkhead box in an area that is sheltered from the weather, has good airflow, is not exposed to direct su nlight, and is within easy reach of all 
required cables.
• Ensure the box has access to power. The Voyager III system power cable  connecting the bulkhead box to ship’s power is 10 feet long.
JCU Planning
• Mount the JCU in a convenient area clos e to the device that will be displaying...

Physical Installation
8432-0005-00-12 Rev 100 — Voyager III Installation Guide 
Physical Installation 
Voyager III Camera Body Handle
A red “non-flight” handle and bolts are supplied with the camera body to make it 
easier to carry. Install the handle using the following procedure.
1.Using a 5.0 mm hex driver, remove the two button head screws from the rear 
of the camera body.
2.Using a 6.0 mm hex driver, install the red handle and secure with the two 
socket head screws supplied.
Caution : Ensure the...