Flir ThermovisionPathFindIR Manual

334-0001-00-10, version 13017
5 – Options and Accessories
5.2 Aftermarket Installation Kit
The FLIR Aftermarket Installation Kit, part number 421-0029-00, is made 
available to facilitate installation in most vehicle applications and includes a 
video monitor, cables, and mounting hardware. The kit will work with any 
PathFindIR camera, which while included and shipped in the kit must be 
selected and purchased separately. The kit contains:
• Universal Mounting Bracket and hardware: 261-1470-00
•...

5 – Options and Accessories
18
October 2009
The following schematic shows how to connect the PathFindIR system using 
the cables in the Aftermarket Installation Kit.
4105734
Monitor
PathFindIR
Camera
(sold separately)
System Cable
308-0159-00Monitor Cable
green - not used
red - power (+)
black - power (-)
red - power (+)
black - power (-)
white - communications
(not used for standard installation)Video Interface
4105735
(part of 4105734)
Cable 

334-0001-00-10, version 13019
5 – Options and Accessories
5.3 Bench Top Kit
The optional FLIR Bench Top Kit, part number 421-0027-00, is made available 
for those who want to operate the PathFindIR system from a 110/240VAC 
power source, for lab testing or for applications where standard AC power is 
available. Using the PathFindIR system with the Bench Top Kit requires a 
monitor (not supplied) having a 75-ohm video input. The kit will work with any 
PathFindIR camera, which must be purchased...

5 – Options and Accessories
20
October 2009
The following schematic shows how to connect the PathFindIR system using 
the cables in the Bench Top Kit.
Please contact FLIR or your local dealer/installer for the latest information on 
PathFindIR system accessories.
PathFindIR
Camera
(sold separately)
Bench Top Cable
308-0142-00
BNC Video outPower Supply
206-0001-20AC Power
Source 

334-0001-00-10, version 13021
6 Installation
6.1 PathFindIR System Installation
Caution!
The PathFindIR camera is a compact, sealed imaging system that fits easily 
behind vehicle grilles and in other compact locations. It includes an internal 
heater to keep the lens clear in icy conditions, and delivers superior image 
quality. It can be ordered as a camera module alone, with a commercial grade 
cable, mounting bracket, or as part of a complete installation kit.
The PathFindIR camera must be mounted in...

6 – Installation
22
October 2009
It is recommended that power to the monitor be supplied separately from 
power to the PathFindIR camera to assure clean (low noise) power to both 
components. Otherwise the video image may appear to have interference, 
ghosting, or undesirable video artifacts. 
6.3 Installation
Caution!
Installation using incorrect connections may result in system malfunction or 
risk of shock. FLIR Commercial Vision Systems, Inc. recommends the standard 
20-foot system cable for proper...

334-0001-00-10, version 13023
6 – Installation
connections should be made to the fused side of the vehicle’s power 
distribution block.
Do not install in areas where the unit will hinder vehicle operation, i.e. radiator, 
steering, headlights, braking systems. Doing so may interfere with the vehicles 
operation and cause an accident.
Do not install in areas of high moisture, dust or air intake paths. Doing so may 
hinder the performance of the PathFindIR unit and cause image degradation 
or window...

6 – Installation
24
October 2009
6.5 Installation Assistance
FLIR offers the Aftermarket Installation Kit which is suitable for many 
applications. Refer to paragraph 5.2 “Aftermarket Installation Kit” on page 17 
for more information about installing the camera with the kit.
If your company has applications utilizing a large number of PathFindIR 
cameras on a specific vehicle please contact FLIR Commercial Vision Systems, 
Inc. directly to discuss your needs. 
6.6 Mounting Assistance
The following are...

334-0001-00-10, version 13025
7Technical Data
7.1 Performance Specification
Thermal Imaging Performance
Sensor type Uncooled microbolometer
Field of view 36° h x 27° v
Spectral band 8 - 14 μ
Resolution 320 x 240 pixels
Time to Image  < 2 sec.
Focal Length  19 millimeters
Outputs
Video NTSC or PAL
Connector types 12-pin automotive connector for power in, video out
Frame Rate
Note: Hz is equivalent to 
frames per second30-Hz for NTSC Video, 25 Hz for PAL video
7.5-Hz for NTSC Video, 8.3 Hz for PAL video
(<...

7 – Technical Data
26
October 2009
7.2 Side Views