Home > Flir > Thermovision > Flir ThermovisionMDSeries Installation Manual

Flir ThermovisionMDSeries Installation Manual

Here you can view all the pages of manual Flir ThermovisionMDSeries Installation Manual. The Flir manuals for Thermovision are available online for free. You can easily download all the documents as PDF.

Page 1

MD-Series
432-0010-00-12
Revision 100
Apr 2013
Installation Guide 

Page 2

© FLIR Systems, Inc., 2013. All rights reserved worldwide. No parts of this manual, in whole or in part, may be copied, 
photocopied, translated, or transmitted to any electronic medium or machine readable form without the prior written 
permission of FL IR Systems, Inc.
Names and marks appearing on the products herein are either  registered trademarks or trademarks of FLIR Systems, Inc. 
and/or its subsidiaries. All other trademarks, trade names, or  company names referenced herein are used for...

Page 3

432-0010-00-12 Rev 100 — MD-Series Installation Guide 1
CHAPTER 1 Installing MD-Series Systems ............................. ........................ 3
Additional References .................................................................................................................... 4
Documentation Conventions .......................................................................................................... 4
Warnings and...

Page 4

 
2432-0010-00-12 Rev 100 — MD-Series Installation Guide 
This page is intentionally blank. 

Page 5

432-0010-00-12 Rev 100 MD-Series Installation Guide 3
CHAPTER 1Installing MD-Series 
Systems
This manual describes the installation of the MD-Series camera. If you need help 
or have additional questions, please call to speak with our support experts; see 
the phone numbers on the back cover of this manual. 
This manual includes information about the following topics:
• System overview
• Installation overview and planning
• Detailed installation instructions including mounting the camera, routing the...

Page 6

 Installing MD-Series Systems
4432-0010-00-12 Rev 100 — MD-Series Installation Guide 
Additional References
The MD-Series camera comes with a complete documentation set on a CD (FLIR 
Doc. # 432-0010-50) that includes this manual as well as others. All documents 
are in PDF format and can be viewed with Adobe Acrobat Reader:
•MD-Series Operator’s Manual  (FLIR Doc. # 432-0010-00-10) contains 
information about how to configure, use, and operate the camera
• MD-Series Quick Start Guide  (FLIR Doc. #...

Page 7

432-0010-00-12 Rev 100 — MD-Series Installation Guide 5
 Installing MD-Series Systems
Warning: Use extreme caution when installing th e product in elevated locations, 
such as on top of a boat or on a mast. Do not perform the installation in wet 
conditions when surfaces could be slippery. Follow local codes and observe 
standard maritime electronic installation best practices.
Warning:  Use of insufficient wire gauge can result in fire. Follow local codes and 
observe standard maritime electronic...

Page 8

 Installing MD-Series Systems
6432-0010-00-12 Rev 100 — MD-Series Installation Guide 
The MD-Series consists of a fixed dome assembly, also known as the camera 
unit. The camera supplies an analog video output through a standard F-type 
connection and receives power from its Power over Ethernet (PoE) interface.
The MD-Series dome camera is an IP network device. In some installations, 
additional cameras, joystick control units (JCU), video equipment, personal 
computers, or wireless devices can...

Page 9

432-0010-00-12 Rev 100 — MD-Series Installation Guide 7
 Installing MD-Series Systems
Since the MD-Series is a fixed camera, it is not possible to move (pan/tilt) the 
camera remotely while the camera is operati ng. Control of the camera is limited to 
making adjustments to the image and to accessing an on-screen configuration 
menu.The possible control functions or image adjustments are described in 
MD-Series Operator’s Manual .
Depending on how much control is needed  and what devices are available,...

Page 10

 Installing MD-Series Systems
8432-0010-00-12 Rev 100 — MD-Series Installation Guide 
• MD-Series documentation package 
Note: Only four studs are required to mo unt the camera; two are extra. For 
installations with special r equirements, substitute other mounting hardware as 
needed since the length required depends on the mounting platform thickness. 
It may be necessary to  supply the following items:
• Camera grounding strap. The required le ngth varies depending on the boats 
configuration. A ring...
Start reading Flir ThermovisionMDSeries Installation Manual

Related Manuals for Flir ThermovisionMDSeries Installation Manual

All Flir manuals