Faroudja Fdp-Dlphd20 User And Installation Manual Manual

							cod.46.0362.000
User and Installation Manual
The home theater projector
FDP-DLPHD20 
						

							1 INTRODUCTION 1
2 IMPORTANT SAFETY INSTRUCTIONS 4
3  PACKAGING AND CONTENTS 6
4  INSTALLATION 7
5  SWITCHING ON AND OFF THE PROJECTOR 9Switch on from stand-by 9
Switching off and returning to stand-by 10
6    CONNECTIONS 10 Composite video input 11
S-VIDEO Input 11
VGA input 11
RGB/YCrCb Input 11
Digital Input 12
Motorised projection screen output 12
RS232 interface connector 13
7  KEYBOARD PAD 13
8  REMOTE CONTROL 14
9  ON SCREEN MENUS 15
INDEX
Source selection 15
Main menu 15
Picture 16
Image 18
Set up 20
Menu 21
Memories 23
Info 24
Quick menus 24
Messages 24
10  
CLEANING AND MAINTENANCE24
11  
TROUBLESHOOTING GUIDE25
12  
OPTIONAL ACCESSORIES26
 A  
TECHNICAL SPECIFICATIONS27
 B  
DIMENSIONS29
 C  
PROJECTION DISTANCES29
 D  
ON SCREEN MENU LAYOUT32 
						

							LIGHT
F1
ZOOM
FOCUS
F2
Not active
in this model.
MENU -
Activates  the On Screen
Display menus.
Navigates menu pages.
FREEZE
Freezes a moving
picture.STAND-BY
Switches off to stand-by.
0-9 Keys
Switch on from stand-by
and allow direct source
selection.
ESCAPE
Deactivates the On Screen Display.
MENU +
Activates  the On Screen Display menus.
Navigates menu pages.
MEMORIES
Activates  Memories menu
INFO
Displays the selected source information 
and the projector status.
VCR
Improves the video recorder
signals quality.
ASPECT
Selects image Aspect ratio.
SOURCE
Displays the Source
Selection menu.BACK LIGHT
Turn on the back light
Up/Down/Left/Right Arrow keys
Navigate through and make adjustments 
to the On Screen menus.
Arrow Up/Down activate Quick
menus.
AUTO
Selects Auto Adjust
(automatic optimisation
of the displayed image).F1
Select lens zoom 
adjustment
F2
Select focus 
lens adjustment 
						

							1
1   INTRODUCTION
Congratulations and thank you for choosing a FDP-DLPHD20
projector, a Faroudja product 
(Fig. 1).
DIGITAL 
INPUTAU
DIO
O
UTZ
OOMC
O
N
TR
O
L (RS
 
232) G
RA
PH
I
CS 
RG
BR
/C
r
G
/
Y
B/
C
b
H
V12435ATT
E
NTI
ON:
 pou
r 
ne 
pas 
comp
romett
re 
l
a 
pr
otect
ion
 cont
re 
l
es
 r
esque
 di
ncende 
r
empl
acer 
par
 un
 f
usib
l
e d
e meme
 t
ype
 
et 
de 
mems 
ca
racte
rist
iqueCAUTI
O
N:
 f
or
 cont
inue
d p
rotect
ion 
agai
nst
 
ri
sk
 of 
fire
, r
epl
ace
 
on
ly
 wi
th same 
type
 
and r
ati
ng f
use. 
						

							2A sophisticated proprietary optical system, coupled with a hight
performance zoom lens ensures hight contrast images, superior
uniformity and edge-to-edge definition.
A new 6-segment colour wheel dramatically reduces the so
called “rainbow effect” and gives a better contrast, better
colorimetry and a lower black level to the image.
The new HD2+ DMD™ chip ensures, on top of the high definition
resolution (1280 x 720 pixels), an increased contrast ratio of >
2800:1 thus delivering on the screen an even more realistic
image.
The low-noise ventilation system – with variable speed fans –
ensures appropriate cooling and maximizes projector reliability.
To fully appreciate your new projector we recommend the use
of a good quality screen and surround-sound system. Contact
your nearest authorized Faroudja dealer for further details.
Faroudja carries out comprehensive functional
testing in order to guarantee the maximum product
quality.
For this reason, when you start using the product
lamp operating hours may already be at between
30 and 60.
In addition to the regular tests, the Quality Control
department performs additional statistical tests at
the time of shipment.
In this case the packing may show signs of having
been opened, and the accumulated lamp operating
hours may be slightly higher than the hours associ-
ated with the standard tests.
™
Fig. 1
The FDP-DLPHD20 incorporates patented Faroudja technology
for deinterlacing, color and detail processing, including DCDi
technology.  The result is that all sources  are converted to very
clean video signals full of detail and color while free of typical
artifacts such as stairstepping and motion breakup.
Using the very latest in DLP™ technology, this projector has
been designed specifically for high quality “Home Cinema”
applications.
Sophisticated digital processing and a wide choice of inputs
enable the connection of a variety of sources such as DVD
players, analogue and digital VCRs, analogue and digital sa-
tellite receivers and personal computers etc.
The long throw zoom lens allows the position of the projector to
be located behind the viewer, thus reproducing a cinema-like
installation 
(Fig. 2).
DIGITAL 
INPUTAUDIO
OUTZ
O
O
MCONTROL (RS 232) GRAPHICS RGBR/Cr
G/Y
B/Cb
HV12435ATTENTION: pour ne pas compromettre 
la protection contre les resque dincende 
remplacer par un fusible de meme type 
et de mems caracteristiqueCAUTION: for continued protection against 
risk of fire, replace 
only with same type 
and rating fuse.
Fig. 2
DLP and DMD are registered trademarks of Texas Instruments.
DCDi is a registered trademark of Faroudja, a division of Genesis
Microchip, Inc. 
						

							3
1 Projection lens
2 Lens shift knob
3 Cooling air inlet vents
4 Remote control IR sensor
5 Cooling air outlet vents
6 Adjustable carry-handle
7 Adjustable levelling feet
8 Ceiling/wall bracket fixing holes
9 Fused power socket
10 Main power switch
11 Remote control rear IR sensor
12 Green LED
13 Red LED
14 Rear keyboard pad
15 Composite video input
16 S-Video input
17 VGA input
18 RGB / YCrCb input
19 Digital Input
20 Optical Audio Output
21 12Vdc screen output
22 RS232 interface connector
64
™
12358
DIGITAL 
INPUTAUD
IO
OUT
ZOO
M
CONTR
OL (RS 232) GR
APHICS R
GB
R
/Cr
G/Y
B
/Cb
HV1
2
435
AT TE
NTIO
N: pour 
ne 
pas 
comp
romettre
 
la 
p
rotection
 cont
re les
 resque 
dincende 
remplacer par un
 fusi
b
le de
 meme 
type 
et
 de
 mems 
ca
racter
istique
CAUT IO
N: for 
continued
 p
rotection
 a
gainst 
risk 
of fi
r
e, replace
 
only 
with same
 type
 
and
 ratin
g 
fuse
.
12111317
9
10
16
21
1822
15
1920
14
7 
						

							4
Prior to switching on the projector please read each chapter of this manual carefully as this manual provides basic
instructions for using the projector.
The installation of the lamp assembly, preliminary adjustments and procedures that necessitate the removal of the
top cover, must be carried out by authorised, trained technicians. There are no user serviceable parts inside. To
ensure safe and long term reliability please use power cables supplied with the projector. Observe all warnings and
cautions.
ATTENTION:
To reduce the risk of electric shock, disconnect the
power supply cable on the rear panel before removing
the top cover of the projector.
Refer to trained, authorised personnel for technical
assistance.
• Federal Communication Commission (FCC Statement)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is used in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determinated by turning the equipment off and on,
the user is encuraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
• For customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
•  For customers in the United Kingdom
ATTENTION: This apparatus must be earthed
The wires in this mains lead are coloured in accordance with the following code:
Green-and-Yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug
proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E or by the safety earth
symbol 
 or coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
This symbol indicates the possible electric shock
hazard associated with uninsulated live
components in the interior of the unit.This symbol indicates the presence of important
instructions regarding use and maintenance of
the product.
2  IMPORTANT SAFETY INSTRUCTIONS 
						

							5 Please follow carefully the warnings listed below, to ensure safe
and long term performance of your projector.
• Connect the projector to a power supply with a nominal
voltage within the following values: 100-240 Vac, 50/60 Hz,
earthed 
(Fig. 3).
100-240 Vac50/60 Hz
DIGITAL 
INPUTAUDIO
OUT35
ATTENTION: pour ne pas compromettre 
la protection contre les resque dincende 
remplacer par un fusible de meme type 
et de mems caracteristiqueCAUTION: for continued protection against 
risk of fire, replace 
only with same type 
and rating fuse.
Fig. 3
• The mains plug is the disconnect device. Take care, when
installing, that the mains plug and socket outlet are easily
accessible. Never pull on the cable to take it out of the socket.
If the system is unlikely to be used for a number of days,
disconnect the power cable and other apparatus connected
to it.
• To save energy, switch off the projector by using the power
switch at the rear; when in stand-by (red light on) the
projector continues to draw a minimal amount of power.
• Only replace the safety fuse (on the power socket at the
rear of projector) with a fuse identical in type and
characteristics (T 3.15A H) 
(Fig. 4).
• Do not switch on your projector when flammable liquids or
fumes are present. Do not pour or drop fluids in the vents.
• Do not use the projector when the room temperature is above
35°C (95°F).
AUDIO
OUT
pas compromettre 
resque dincende 
e de meme type 
tiqueed protection against 250 V
T 3.15A H
2
3
4
1
Fig. 4
• Do not obstruct the cooling air inlets on the top cover, or the
air outlets underneath the projector.
• Do not switch on the projector if it is standing on soft surfaces
such as cushions, pillows, blankets, mattresses and carpets:
the air cooling outlets underneath could become obstructed.
• Do not switch-on the projector if it is standing on surfaces
sensitive to heat, as this may result in damage caused by
the hot air outlets underneath. Should this be unavoidable
take extra precaution of protecting the surfaces with a layer
of heat resistant material.
• Intense Light Source!  Do not stare directly into the projection
lens as possible eye damage could result.  Be especially
careful that children do not stare directly into the beam.
• Do not open the projector’s cover; no user serviceable parts
are inside. Refer servicing to qualified service personnel.
Opening the projector’s cover will invalidate warranty
.
• Take care not to shake the projector whilst carrying it by the
handle.
• Always position the projector  away from direct heat sources. 
						

							6
3   PACKAGING AND CONTENTS
To unpack the projector safely and easily please follow steps 1
to 4, as drawing 
(Fig. 5).
It is recommended that the carton and packaging is retained
for future use and in the unlikely event that your projector needs
to be returned for repair. The carton should contain the following:
- the projector
- the remote control
- four 1.5V AAA batteries (for remote control)
- one power cable (USA)
- the user manual.
Fig. 5
• Do not touch the surface of the projection lens.
• The projector must be positioned on a stable, suitable
platform or be installed using a bracket for fixed ceiling or
wall installation. Do not rest the projector on the side panels
or on the rear panel when in operation.
• Take care to position cables safely, especially in dark places,
in order to avoid a trip hazard.• For installations using a ceiling or wall-mounted bracket,
carefully follow the installation and safety instructions
provided with the bracket’s literature.
• Please remove batteries from the remote control if not in use
for a long period of time. 
						

							7 Position the projector on a stable, suitable platform or utilise
the optional bracket for a fixed ceiling or wall installation.
CAUTION: In the case of ceiling or wall mounting
using a suspension bracket, follow the instructions
carefully and comply with the safety standards you
will find in the box together with the bracket. If you
use a bracket different to the one supplied by
Faroudja, you must make sure that the projector is
at least 65 mm (2-9/16 inch) from the ceiling and
that the bracket is not obstructing the air vents on
the lid and on the bottom of the projector.
Adjust the feet underneath to obtain a level position, lining up
the base of the projected image to the base of the projection
screen 
(Fig. 6).
D
IG
IT
A
L
 
IN
P
U
TA
U
D
IO
O
U
TZOOMCONTROL (RS 232) GRAPHICS RGBR/Cr
G/Y
B/Cb
HV12435A
T
T
E
N
T
I
O
N
:
 
p
o
u
r
 
n
e
 
p
a
s
 
c
o
m
p
r
o
m
e
t
t
r
e
 
l
a
 
p
r
o
t
e
c
t
i
o
n
 
c
o
n
t
r
e
 
l
e
s
 
r
e
s
q
u
e
 
d

i
n
c
e
n
d
e
 
r
e
m
p
l
a
c
e
r
 
p
a
r
 
u
n
 
f
u
s
i
b
l
e
 
d
e
 
m
e
m
e
 
t
y
p
e
 
e
t
 
d
e
 
m
e
m
s
 
c
a
r
a
c
t
e
r
i
s
t
i
q
u
eC
AU
TION
: for continue
d protection
 against 
risk of fire
, repla
ce 
on
ly w
ith s
am
e type 
and ratin
g fuse.
Fig. 6
Position the projector the desired distance from the screen:
the size of the projected image is determined by the distance
from the lens of the projector to the screen and the zoom setting.
See “Appendix C”: Projection distances” for more information.
Use the motorised lens zoom to adjust the image size and the
motorised lens focus to achieve maximum clarity. With optimumfocus you should be able to clearly see each single pixel when
within close proximity to the screen 
(Fig. 7).
FOCUS
FOCUS
FOCUS
FOCUS
D
IG
ITA
L 
IN
PU
TAU
DI
O
O
U
TZ
O
O
MCONTROL (RS 232) GRAPHICS RGBR/Cr
G/Y
B/Cb
HV12435ATTENTION: pour ne pas compromettre 
la protection contre les resque dincende 
remplacer par un fusible de meme type 
et de mems caracteristiqueCAUTION: for continued protection against 
risk of fire, replace 
only with same type 
and rating fuse.
Fig. 7
The manual lens shift adjustment allows the projected image
to be moved vertically, up or down, in relation to the centre of
the screen; the maximum adjustment being equal to half the
height of the image in either direction 
(Fig. 8).
D
IG
IT
A
L 
I
NP
UTAU
DIO
O
UTZO
OMC
ON
TR
OL
 (
R
S
 2
3
2
) G
RA
PH
IC
S
 RG
BR/
Cr
G/
Y
B
/
CbHV1
2435A
T
TEN
T
IO
N
: 
p
o
ur
 n
e p
a
s
 c
o
m
pro
m
e
t
tre 
l
a pr
o
t
e
c
t
i
o
n c
o
n
tre 
l
e
s r
e
s
q
u
e d

i
n
c
e
n
d
e 
r
e
m
p
l
a
c
er 
p
ar
 u
n 
f
u
s
ib
l
e 
d
e 
m
e
m
e t
y
p
e 
e
t 
d
e 
m
e
m
s 
c
ar
a
c
t
er
i
s
t
i
q
u
eCA
U
TI
ON:
 f
or
 c
o
n
t
i
nu
e
d
 pr
o
t
e
c
t
i
o
n 
a
ga
i
n
s
t 
r
i
sk
 o
f 
f
ir
e, 
re
p
l
a
c
e 
o
n
l
y 
wi
t
h s
a
m
e 
t
y
p
e 
a
n
d r
a
t
ing
 f
u
s
e.
Fig. 8
In the event you are unable to centre the image within the screen
area, tilt the projector until the image is correctly positioned.
Any keystone error can be removed by the Keystone adjustment
in the Set up menu 
(Fig. 9).
4   INSTALLATION