Faroudja Fdp-Dlphd20 User And Installation Manual Manual

cod.46.0362.000
User and Installation Manual
The home theater projector
FDP-DLPHD20 

1 INTRODUCTION 1
2 IMPORTANT SAFETY INSTRUCTIONS 4
3  PACKAGING AND CONTENTS 6
4  INSTALLATION 7
5  SWITCHING ON AND OFF THE PROJECTOR 9Switch on from stand-by 9
Switching off and returning to stand-by 10
6    CONNECTIONS 10 Composite video input 11
S-VIDEO Input 11
VGA input 11
RGB/YCrCb Input 11
Digital Input 12
Motorised projection screen output 12
RS232 interface connector 13
7  KEYBOARD PAD 13
8  REMOTE CONTROL 14
9  ON SCREEN MENUS 15
INDEX
Source selection 15
Main menu 15
Picture 16
Image 18
Set...

LIGHT
F1
ZOOM
FOCUS
F2
Not active
in this model.
MENU -
Activates  the On Screen
Display menus.
Navigates menu pages.
FREEZE
Freezes a moving
picture.STAND-BY
Switches off to stand-by.
0-9 Keys
Switch on from stand-by
and allow direct source
selection.
ESCAPE
Deactivates the On Screen Display.
MENU +
Activates  the On Screen Display menus.
Navigates menu pages.
MEMORIES
Activates  Memories menu
INFO
Displays the selected source information 
and the projector status.
VCR
Improves the video recorder...

1
1   INTRODUCTION
Congratulations and thank you for choosing a FDP-DLPHD20
projector, a Faroudja product 
(Fig. 1).
DIGITAL 
INPUTAU
DIO
O
UTZ
OOMC
O
N
TR
O
L (RS
 
232) G
RA
PH
I
CS 
RG
BR
/C
r
G
/
Y
B/
C
b
H
V12435ATT
E
NTI
ON:
 pou
r 
ne 
pas 
comp
romett
re 
l
a 
pr
otect
ion
 cont
re 
l
es
 r
esque
 di
ncende 
r
empl
acer 
par
 un
 f
usib
l
e d
e meme
 t
ype
 
et 
de 
mems 
ca
racte
rist
iqueCAUTI
O
N:
 f
or
 cont
inue
d p
rotect
ion 
agai
nst
 
ri
sk
 of 
fire
, r
epl
ace
 
on
ly
 wi
th same...

2A sophisticated proprietary optical system, coupled with a hight
performance zoom lens ensures hight contrast images, superior
uniformity and edge-to-edge definition.
A new 6-segment colour wheel dramatically reduces the so
called “rainbow effect” and gives a better contrast, better
colorimetry and a lower black level to the image.
The new HD2+ DMD™ chip ensures, on top of the high definition
resolution (1280 x 720 pixels), an increased contrast ratio of >
2800:1 thus delivering on the screen an even...

3
1 Projection lens
2 Lens shift knob
3 Cooling air inlet vents
4 Remote control IR sensor
5 Cooling air outlet vents
6 Adjustable carry-handle
7 Adjustable levelling feet
8 Ceiling/wall bracket fixing holes
9 Fused power socket
10 Main power switch
11 Remote control rear IR sensor
12 Green LED
13 Red LED
14 Rear keyboard pad
15 Composite video input
16 S-Video input
17 VGA input
18 RGB / YCrCb input
19 Digital Input
20 Optical Audio Output
21 12Vdc screen output
22 RS232 interface connector
64
™
12358...

4
Prior to switching on the projector please read each chapter of this manual carefully as this manual provides basic
instructions for using the projector.
The installation of the lamp assembly, preliminary adjustments and procedures that necessitate the removal of the
top cover, must be carried out by authorised, trained technicians. There are no user serviceable parts inside. To
ensure safe and long term reliability please use power cables supplied with the projector. Observe all warnings and...

5 Please follow carefully the warnings listed below, to ensure safe
and long term performance of your projector.
• Connect the projector to a power supply with a nominal
voltage within the following values: 100-240 Vac, 50/60 Hz,
earthed 
(Fig. 3).
100-240 Vac50/60 Hz
DIGITAL 
INPUTAUDIO
OUT35
ATTENTION: pour ne pas compromettre 
la protection contre les resque dincende 
remplacer par un fusible de meme type 
et de mems caracteristiqueCAUTION: for continued protection against 
risk of fire, replace 
only...

6
3   PACKAGING AND CONTENTS
To unpack the projector safely and easily please follow steps 1
to 4, as drawing 
(Fig. 5).
It is recommended that the carton and packaging is retained
for future use and in the unlikely event that your projector needs
to be returned for repair. The carton should contain the following:
- the projector
- the remote control
- four 1.5V AAA batteries (for remote control)
- one power cable (USA)
- the user manual.
Fig. 5
• Do not touch the surface of the projection lens.
• The...

7 Position the projector on a stable, suitable platform or utilise
the optional bracket for a fixed ceiling or wall installation.
CAUTION: In the case of ceiling or wall mounting
using a suspension bracket, follow the instructions
carefully and comply with the safety standards you
will find in the box together with the bracket. If you
use a bracket different to the one supplied by
Faroudja, you must make sure that the projector is
at least 65 mm (2-9/16 inch) from the ceiling and
that the bracket is not...