Epson X410 Manual

3. Select the time period you want as the
Power Off Timersetting.
4. Select the time period you want as the Sleep Timersetting.
5. Click Apply.
6. When you see the confirmation message, click Yes, then close the Printer Settings window.
Parent topic: The Power Off and Sleep Timers
Epson Connect Solutions for Smartphones, Tablets, and More You can print documents, photos, emails, and web pages from your home, office, or even across the
globe. You can use your smartphone, tablet, or computer. Epson offers...

Parent topic:
Product Basics
Using Epson Email Print With Epson Email Print, you can print from any device that can send email, such as your smartphone,
tablet, or laptop. Just activate your products unique email address. When you want to print, attach a
PDF, Microsoft Office document, or photo and send an email to your product.
1. Set up your product for network printing as described on the Start Heresheet.
2. If you did not already set up Email Print when you installed your product software, visit...

2. Download and install the Remote Print software.
3. Obtain the email address and optional access key of the Epson product you want to use for printing,
and enter this address during Remote Print setup.
4. Select the print command in your application and choose the Remote Print driver for your Epson product.
Parent topic: Epson Connect Solutions for Smartphones, Tablets, and More
Using Epson Scan to Cloud The Epson Scan to Cloud service sends your scanned files to a destination that you have registered...

3. Locate your products IP address on the network status sheet.
4. Enter the IP address into the address bar of a web browser.
5. Select the
Google Cloud Print Services option.
Note: If you dont see the Google Cloud Print Services option, turn your product off and back on. If
the option still doesnt appear, select the Firmware Updateoption and follow the on-screen
instructions to update your product.
6. Click Register.
7. Select the check box to agree to the Usage Advisory and click Next.
8. Click OKto...

Wi-Fi Networking
See these sections to use your product on a Wi-Fi network.
Wi-Fi Infrastructure Mode Setup
Wi-Fi Direct Mode Setup
Wi-Fi Protected Setup (WPS)
Printing a Network Status Sheet
Changing or Updating Network Connections
Wi-Fi Infrastructure Mode Setup You can set up your product to communicate with your computer using a wireless router or access point.
The wireless router or access point can be connected to your computer over a wireless or wired network.
1 Epson product
2 Wireless router or...

6 Ethernet cable (used only for wired connection to the wireless router or access point)
Selecting Wireless Network Settings From the Control Panel
Parent topic: Wi-Fi Networking
Selecting Wireless Network Settings From the Control Panel You can select or change wireless network settings using your product control panel.
To install your product on a wireless network, follow the instructions on the Start Heresheet and install
the necessary software from the product CD. The installer program guides you...

4. Press the up or down arrow buttons to select the name of your wireless network and press the
OK
button. If you do not see your wireless networks name, you can enter it manually.
Note: To enter the wireless network name manually, select Other SSIDsand press the OKbutton.
Enter your network name as described in the next step.
5. Enter your wireless password (or network name and then password).
• Press the arrow buttons to highlight a character or a function button displayed on the keypad.Then press the...

Parent topic:
Wi-Fi Infrastructure Mode Setup
Wi-Fi Direct Mode Setup You can set up your product to communicate directly with your computer or another device without
requiring a wireless router or access point.
1 Epson product
2 Computer with a wireless interface
3 Other wireless device
Your product automatically selects one of these modes to communicate with your computer or device:
Access point mode If your product is not already connected to a wireless network, it enters access point mode and the...

Peer-to-peer mode
If your product is already connected to a wireless network, it enters peer-to-peer mode and
disconnects from any other networks. This also disables any other product features requiring access
to the Internet. When operating in this mode, your product displays a DirectorDconnection symbol
on the LCD screen.
Note: To disconnect a peer-to-peer mode connection, release the connection to your product from
your computer or other device. Your product will reconnect to the previously used...

4. Press the down arrow button, then press the
OKbutton to change the Wi-Fi Direct password.
Note: If you have already connected devices or computers to your product via Wi-Fi Direct, they will
be disconnected when you change the password.
5. Enter your Wi-Fi Direct password. Note: Your password must be at least 8 and no more than 22 characters long.
• Press the arrow buttons to highlight a character or a function button displayed on the keypad. Then press the OKbutton to select it.
• To change the case...