Epson V600 Manual

For  the  Target setting, select  Adobe  RGB.
Select Display  preview using monitor  compensation , then click OK to  return  to  the  Epson  Scan  window.
Click Scan.
What  happens  next  depends  on  how you  started your scan.  See Finishing  the  Scan  for instructions.
Note:
You can also  optimize the  color  accuracy  of your images using a  photo-editing  application, such  as  ArcSoft
PhotoStudio.  For  help  using ArcSoft PhotoStudio,  select  the  Help  option  in  the  software, see  the...

Home > Scanning  Special  Projects
Assigning a  Program to a  Scanner Button
Assigning a  Project Program in  Epson  Event  Manager  to  a  Scanner Button
Each scanner  button opens a  pre -selected  program when you  press it.  The  default programs  they  open and the  default actions
they  perform  are  described  in  the  table below.
Button Default action
 StartEpson  Scan  starts.
 CopyEpson  Copy  Utility  starts.
 E -mail
Epson  Scan  automatically  scans, then the  Send  File  Via E -mail...

Click the  arrow in  the  list next  to  the  button name, then select  the  action  you  want  to  assign.
Click Close  to  close  the  Epson  Event  Manager  window.
Now whenever you  press the  button you  assigned, the  action  you  selected  opens.
Note:
If you  need  help  using Epson  Event  Manager, do  one  of the  following.
For  Windows : Click the  
 icon  in  the  upper  right corner  of the  screen.
For  Mac  OS X : Click Help  from menu, then Epson Event Manager Help
Top 

Home > Maintenance
Cleaning the Scanner
To  keep  your scanner  operating at its best, clean  it periodically using the  following procedure.
Caution:
Do not  press the  glass  surface of the  document table with  any  force.
Be careful  not  to  scratch  or  damage  the  glass  surface of the  document table, and do  not  use a  hard or
abrasive  brush  to  clean  it.  A damaged  glass  surface can decrease the  scan quality.
Never use alcohol, thinner, or  corrosive solvent  to  clean  the  scanner....

a. transparency unit  window
Make  sure that  no  dust builds  up on  the  surface of the  document table or  the  transparency unit  window.  Dust  can cause
spots in  your scanned  images. 

Home > Maintenance
Replacing the Scanner Light Source
The  luminosity of the  scanner  light source  declines  over  time.  If the  light source  breaks or  becomes  too  dim to  operate
normally,  the  scanner  stops working and the  Status  light rapidly  flashes. When this  happens, the  light source  assembly  must
be  replaced by  a  professional. For  details,  contact Epson  Support. See Epson  Technical Support  for more  information. 

Home > Maintenance
Power  Off Timer Setting
The  product  turns  off  automatically  if  no  operations are  performed  for the  selected  period.  You can adjust  the  time  before
power management  is applied. Any  increase will  affect  the  products  energy efficiency. Please consider  the  environment before
making any  change.
Follow the  steps below  to  adjust  the  time.
Make  sure that  the  scanner  is connected  to  your computer and that  the  scanner  is turned  on.
Start Epson  Scan...

Home > Maintenance
Transporting the Scanner
Before you  transport  the  scanner  for a  long  distance or  store  it for an  extended period of time,  the  scanner’s  carriage needs to
be  in  the  home  position  to  prevent damage.
Make  sure the  carriage is in  the  home  position  on  the  upper  side  of the  scanner. If the  carriage is not  in  the  home
position, turn on  the  scanner  and wait until  the  carriage moves to  the  home  position.
Turn  off  the  scanner  using its power switch,...

Home > Solving  Problems
Scanner Problems
The  Status  Light Is  Flashing
The  Scanner Does Not  Turn  On
The  Scanner Turns  Off
You Cannot Start Epson  Scan
Pressing a  Scanner Button  Does Not  Start the  Correct Program
The Status Light Is Flashing
The  green and orange status lights  are  on  the  left  of the   PDF  button and the  blue  status light is on  the  bottom of the  four
buttons.
Color Indicator
Status Meaning
Green
 On Power is on.
 FlashingEntering  power saving  mode.
Orange
 Flashing...

Top
You  Cannot Start Epson Scan
Wait until  the  blue  status light stops flashing  to  indicate  that  the  scanner  is ready  to  scan.
Make  sure the  scanner  is turned  on.
Turn  off  the  scanner  and computer,  then check the  interface cable  connection  between them to  make sure it is secure.
Use  the  USB  cable  that  came with  your scanner  or  that  is indicated  in  USB  Interface.
Connect the  scanner  directly  to  the  computer’s USB  port or  through one  USB  hub only. The  scanner...