Epson Stylus Pro GS6000 User Manual

11
Introduction|11
Where To Get Help
Epson provides technical support and information on the installation, 
configuration, and operation of professional printing products through the 
Epson Preferred Limited Warranty Plan. Dial (888) 377-6611, 6
AM to 
6
PM, Pacific Time, Monday through Friday. Days and hours of support are 
subject to change without notice. 
Before you call, make sure you have your Unit ID number, which is 
included with the Epson Preferred Limited Warranty Plan information that 
came...

12
12|Introduction
Important Safety Instructions
Before using your printer, read the following safety instructions to make sure 
you use the equipment safely and effectively.
Setting Up the Printer
The printer weighs about 331 lb (150 kg) without ink or paper. Make 
sure you have sufficient assistance when lifting it. See page 17.
Select a location with adequate ventilation.
Avoid locations exposed to air that is blown directly from a fan or air 
conditioner. Blown air may dry the ink in the print head...

13
Introduction|13

The printer’s power cord is designed for use with the printer only. Using 
it with other equipment may result in fire or electric shock.
Do not use a damaged or frayed power cord.
If you use an extension cord with the printer, make sure the total ampere 
rating of devices plugged into the extension cord does not exceed the 
cord’s ampere rating. Also, make sure the total ampere rating of all 
devices plugged into the wall outlet does not exceed the wall outlet’s 
ampere rating.
Using...

14
14|Introduction

Keep all combustible materials or liquids away from the printer. 
Exposure of these materials or liquids to the heated platen may cause a 
fire.
Do not move the paper release lever unless instructed to do so. Moving 
the lever at the wrong time may cause the print head to touch the 
pressure rollers and cause a malfunction.
When not using the printer for one week or more, clean the print heads 
once a week to preserve print quality. If the print head is not cleaned, it 
may get...

15
Introduction|15
Handling Ink Cartridges
Keep ink cartridges out of the reach of children and do not drink the 
ink.
Store ink cartridges in a cool, dark place.
Handle the ink with care. Avoid having the ink come into contact with 
your skin, eyes, and clothing, and avoid accidental ingestion. Be careful 
not to inhale the vapors.
If ink gets on your skin, wash well with plenty of soapy water. Consult 
your doctor if your skin feels irritated or is discolored.
If ink gets in your eyes, flush them...

16
16|Introduction
Handling Waste Ink
Before handling the waste ink, read the Material Safety Data Sheet 
(MSDS) for your printer. You can download it from Epson’s support 
website at epson.com/support (U.S.) or epson.ca/support (Canada).
The waste ink from the printer is industrial waste. Proper waste ink 
disposal in compliance with the industrial waste disposal laws and 
ordinances of your local government is required. Consign disposal of 
waste inks to an industrial waste disposer. Provide the Waste...

17
17
This chapter includes the following information:
Unpacking and assembling the Pro GS6000
Installing the Auto Take-Up Reel
Removing the printer packing materials
Connecting the power cord
Installing ink
Connecting to your computer and network
Updating the printer firmware
Configuring the printer for a network
Unpacking and Assembling the Pro GS6000
Before beginning assembly, make sure you have sufficient space to set up and 
use the printer. The following illustration shows the minimum space...

18
18|Setting Up the Printer
Unpacking and Assembling the Stand
1. Unpack the stand and make sure you have all these items.
2. Insert the right leg into the right base (labeled with an 
R) as shown. Use 
the hex wrench to fasten the leg with the two bolts.
Note: You also need a 
long-handled Phillips-head 
screwdriver to assemble 
the stand.
2 bases2 legsHorizontal strut
8 wing screws
Hex wrench 8 bolts
4 hex screwsTank 
bracket2 cable 
supports
Note: You can also 
assemble the stand by 
placing the legs...

19
Setting Up the Printer|19
3. Assemble the left leg and base in the same way.
4. Attach the horizontal strut as shown, then fasten it with two bolts at 
each end. 
 
Left leg
Front of 
stand
Right leg
Front of 
stand
Left leg
Front of 
stand
 

20
20|Setting Up the Printer
5. Attach the bracket for the waste ink tank to the outside of the right leg 
using the four hex screws.
6. Make sure all of the screws are tightened securely.
7. Rotate the feet clockwise to stabilize the stand before installing the 
printer on it.
Right leg