Epson Stylus Pro 9450 User Manual

The Control Panel191
20. Select PAPER SUCTION, and then press the Menu r button. 
Press the Paper Feed d button or Paper Feed u button to 
select STANDARD, -1, -2, -3, or -4, and then press the Enter 
 
button.
21. Press the Paper Source l button.
22. Select M/W ADJUSTMENT, and then press the Menu r button. 
Press the Paper Feed d button or Paper Feed u button to 
adjust MicroWeave. Increase the value to give priority to the 
print speed, or decrease it to give priority to the print quality. 
Press the...

The Control Panel192
Printing a status sheet
While in Menu mode, you can print a status sheet to see the 
current default values. To print a status sheet, follow the steps 
below.
1. Make sure that paper is loaded in the printer.
2. Press the Menu r
 button to enter Menu mode.
3. Press the Paper Feed d button or Paper Feed u button to 
display TEST PRINT, and then press the Menu r
 button.
4. Press the Paper Feed d button or Paper Feed u button to 
display STATUS SHEET, and then press the Menu r button....

The Control Panel193
3. Press the Paper Feed d button or Paper Feed u button to 
display ROLL PAPER COUNTER, and then press the Menu r
 
button.
4. Press the Paper Feed d button or Paper Feed u button to 
select the length of the roll paper (between 5 and 99.5 m or 15 
and 300 ft), and then press the Enter 
 button.
5. The screen changes so that you can select the alert value. Press 
the Paper Feed d button or Paper Feed u button to select 
the alert value (between 1 and 15 m or 3 and 50 ft). 
6. Press...

The Control Panel194
1.Enter Maintenance mode.
Make sure that the printer is turned off. While pressing and 
holding the Pause 
 button, press the Power  button to 
turn on the printer.
2.Select an item.
Press the Paper Feed d button or Paper Feed u button to 
select a desired item.
3.Set the item.
Press the Menu r
 button to enter the selected item. The first 
parameter is displayed on the LCD panel.
4.Select a parameter.
Press the Paper Feed d button or Paper Feed u button to 
select a parameter for...

The Control Panel195
Maintenance mode list
Item First parameters Second parameters
“HEX DUMP” on 
page 196PRINT EXECUTE
“LANGUAGE” on 
page 197ENGLISH, FRENCH, 
ITALIAN, GERMAN, 
PORTUGUE, SPANISH, 
DUTCH-
“REMAINING PPR 
SETUP” on page 197OFF, ROLL -
“UNIT” on page 198 METER, FEET/INCH -
“CUT PRESSURE” on 
page 1980% - 150% -
“SS CLEANING” on 
page 198EXECUTE -
“PWR ON ROLL PPR 
FEED” on page 198ON, OFF -
“DEFAULT PANEL” on 
page 198EXECUTE -
 

The Control Panel196
Details of maintenance mode items
HEX DUMP
Data received from the host computer can be printed out in 
hexadecimal numbers.
To print out the data, follow the steps below.
1. Make sure that paper is loaded in the printer. 
2. While in Maintenance mode, press the Paper Feed d button 
or Paper Feed u button to display HEX DUMP.
3. Press the Menu r button to display PRINT, and then press the 
Enter 
 button again to start printing. 
“INK INFO MENU” on 
page 198EPSON Stylus Pro...

The Control Panel197
The print data in the print buffer is printed with 16-byte hex. 
data in the left column and corresponding ASCII characters 
in the right column.
Note:
If the last data is less than 16 bytes, it is not printed until you press the 
Pause 
 button.
LANGUAGE
You can select the language to be displayed on the LCD panel.
To select a suitable language, follow the steps below.
1. While in Maintenance mode, press the Paper Feed d button 
or Paper Feed u button to display LANGUAGE, and then...

The Control Panel198
2. Press the Paper Feed d button or Paper Feed u button to 
select a suitable function. 
3. Press the Enter 
 button.
UNIT
You can select a unit of measurement to use to display length. To 
select a unit, follow the steps below.
1. While in Maintenance mode, press the Paper Feed d button 
or Paper Feed u button to display UNIT, and then press the 
Menu r
 button.
2. Press the Paper Feed d button or Paper Feed u button to 
select a suitable unit.
3. Press the Enter 
 button to set the...

Paper Handling199
Chapter 5
Paper Handling
Notes on Epson Special Media and Other 
Media
Although most types of coated paper provide good printing 
results, the print quality varies depending on the paper quality 
and the manufacturer. Test the print quality before purchasing a 
large amount of paper.
c
Caution
Keep fingers off the printable surface of the media, as fingerprints 
may reduce the print quality. Whenever possible, use gloves to 
handle media.
Using Epson special media
Epson provides special...

Paper Handling200
Storing Epson special media
To keep the quality of Epson special media:
❏Store unused media in the original plastic bag and outer 
package so as to avoid moisture problems.
❏Avoid storing the media in places exposed to high 
temperature, humidity, or direct sunlight.
Using paper other than Epson special media
When you use paper other than Epson special media, or print 
using the RIP (Raster Images Processor), see the instructions 
included with the paper or RIP system, or contact your...