Epson Stylus Pro 7900 User Manual

							111
Printing With Epson Drivers for Macintosh|111
7. Set the Mode option as follows:
Click Automatic to have the printer driver analyze the contents of 
your image or file and make the appropriate printing adjustments. If 
a 
Quality/Speed slider appears, set it according to the priorities of 
your print job. 
You can choose one of the mode settings shown at the left in the 
drop-down menu:
Charts and Graphs intensifies colors and lightens the midtones 
and highlights of an image. Use this setting for presentation 
graphics.
EPSON Standard (sRGB) increases the contrast in images. Use 
this setting for color photographs.
Adobe RGB matches image colors to the Adobe RGB color 
standard. 
Click Advanced Settings to access additional options, as described 
in the remaining steps.
8. Choose one of the following 
Print Quality settings:

 Normal - 360dpi 
 Fine - 720dpi 
 Fine - 1440dpi 
 SuperFine - 1440dpi 
 SuperPhoto - 2880dpi 
9. Choose any of the following advanced options:
 Super MicroWeave for maximum elimination of banding (may 
not be accessible for certain media types).
 High Speed for fast, bidirectional printing. For higher quality, 
make sure you deselect this option.
 Flip Horizontal for printing a mirror image of your file. 
 Finest Detail for sharper edges on vector-based data including text, 
graphics, and line art. (This setting does not affect photographs and 
is not recommended for large files.)
Note: The Print Quality 
settings available depend 
on the Media Type you 
selected. Choose a lower 
print quality setting for 
faster printing or 
SuperPhoto - 2880dpi 
for the best quality.
 
						

							112
112|Printing With Epson Drivers for Macintosh
Continue with the instructions on page 112 to select color management 
settings. If you are using the color management settings in Photoshop or 
another application, it is very important to turn off color management in the 
printer driver.
Choosing Color Management Options
Follow these instructions to use color management in the printer driver. 
1. Select 
Printer Color Management from the drop-down menu, then 
click 
Advanced Settings. You see this screen:
2. Select one of the following settings:
 Color Controls to choose from three color adjustment modes and 
from two 
Gamma settings. Click the arrow next to Advanced 
Settings 
to specify individual values for brightness, contrast, 
saturation, and CMY inks. When you use the driver to perform 
color management, make sure you turn it off in your application.
 
						

							113
Printing With Epson Drivers for Macintosh|113
 ColorSync 
for mapping colors to your printer’s profile. In most 
cases, you will get better results by applying color management in 
your application, rather than in the printer driver. If you choose this 
setting, you can choose 
ColorSync from the drop-down menu and 
choose filters or other settings. 
 (Off) No Color Adjustment to disable color management in the 
printer driver. Choose this mode when you use a color-managed 
ICC workflow in Photoshop or another software application. See 
your on-screen User’s Guide for instructions.
Choosing Paper Configuration Options
Follow these instructions if you are using non-Epson media and you need to 
fine-tune its performance.
1. Select 
Paper Configuration from the drop-down menu. You see this 
screen:
2. Select the correct settings to match your ICC profile. These settings 
override any paper configuration settings you may have made using the 
printer’s control panel.
 Color Density lets you control the ink saturation level.
Note: You may need to 
change the Color Density 
setting if your custom 
color profile was created 
to optimize D-max and 
color gamut.
 
						

							114
114|Printing With Epson Drivers for Macintosh
 Drying Time per Print Head Pass
 lets you print with non-Epson 
media and avoid smearing the ink. You can make the print head 
wait up to 5 seconds after each pass to allow ink to dry on the page. 
 Paper Feed Adjustment helps reduce banding. Choose a lower 
value if you see white lines on your prints, or a higher value if you 
see dark lines.
 Paper Thickness helps reduce vertical banding and creates a 
sharper image when printing on unusually thick or thin paper.
 Paper Suction lets you decrease the paper suction level when 
printing on thinner papers (less than 12 lb), such as CAD drafting 
paper.
 Platen Gap lets you fine-tune the setting for various paper 
thicknesses. 
 Roll Paper Back Tension lets you adjust the tension when printing 
on roll paper. Change the value if you find wrinkles on your 
printouts when 
Auto is selected.
Choosing Roll Paper Options
If you are printing on roll paper, make sure you choose one of the roll paper 
options as the 
Paper Size setting, as described on page 106. In addition, 
you need to check these settings for various cutting and feeding options.
1. Select 
Roll Paper Option from the drop-down menu. You see this 
screen:
2. Choose one of the following 
Auto Cut settings:
 
						

							115
Printing With Epson Drivers for Macintosh|115

 allows margin space at the top and bottom of each 
image.
 Double Cut extends the space between the images and trims each 
print individually. This provides the cleanest edge for borderless 
printing.
 Single Cut allows images to be printed end-to-end and saves paper. 
With borderless printing, you may see a sliver of the previous or 
next image if you print multiple images in one print job. You will 
see a white margin between print jobs.
disables automatic cutting. Choose this setting if you want to 
operate the cutter manually, use the optional Auto Take-Up Reel, 
or print multiple print jobs without cutting.
See page 70 for instructions on using the   button to operate the 
cutter.
3. Select either of the following options, if desired (available only when 
you’ve selected a Paper Size setting with the 
Roll Paper - Banner 
option):
 Print Page Line prints trim lines on the right and bottom edges of 
your pages. 
 Save Roll Paper saves paper by not feeding the blank portion of 
the last page of your document. 
Normal 
cut
Single 
cut Double 
cut
Note: These settings 
override settings made 
through the control panel.
 
						

							116
116|Printing With Epson Drivers for Macintosh
Controlling Borderless Image Expansion
To control the amount of expansion when printing using a Paper Size with 
the 
Auto Expand option, select Expansion from the drop-down menu. 
You see this screen:
Adjust the slider to increase or decrease the amount of expansion.
The widths shown in the table on page 88 work with the 
Standard 
Expansion setting. 
Use the Min setting to minimize the amount of image clipping. You 
may see a white border around your image.
Use the Max setting to maximize the image width. This will increase the 
amount of image clipping.
Choosing Advanced Black and White Photo Settings
Advanced Black and White Photo mode allows you to easily produce neutral 
and toned black-and-white prints using your Epson driver. This mode offers 
an alternative black and white workflow with settings for more advanced 
control.
Whether your photo is color or grayscale, you can use this unique screening 
and color management technology to create stunning black-and-white 
prints. This mode is only available when printing on certain media types.Note: If you are printing 
from Photoshop, make 
sure you do not use 
Photoshop’s color 
management settings 
when using Advanced 
Black and White Photo 
mode. There are no 
profiles associated with 
this screening and color 
management technology. 
 
						

							117
Printing With Epson Drivers for Macintosh|117
1. Select Print Settings from the drop-down menu. 
2. Choose the Media Type setting for the paper you have loaded in the 
printer. (See page 121 for instructions.)
3. Choose
 Advanced B&W Photo as the Color setting. 
4. Uncheck 
High Speed for the best quality. 
Note: If Advanced Black 
and White Photo is not 
available for your media 
type, you may need to 
change your black ink 
cartridge. See page 163 
for more information.
 
						

							118
118|Printing With Epson Drivers for Macintosh
5. Select Printer Color Management from the drop-down menu. You see 
this screen:
6. Choose the settings that are best for your photo.
 Color Toning allows you to add tone (hue) to your black and white 
output. The default is 
Neutral, which will provide you with a 
neutral tonal scale print. You can also choose other popular presets 
such as 
Cool, Warm, and Sepia. Note that the presets affect the 
target found in the tone color circle.
 allows you to easily change the entire tonal scale of your black 
and white output. While 
Darker is the default setting, you may see 
better results if you choose 
Dark. 
 Brightness adjusts the overall lightness and darkness of your image.
 Contrast adjusts the difference between the light and dark areas of 
your image.
 Shadow Tonality and Highlight Tonality allow you to control 
tonality only in the shadow or highlight areas of your image. 
 
						

							119
Printing With Epson Drivers for Macintosh|119
 Max Optical Density
 adjusts the overall density or focus of the 
print. Create a soft focus print by setting the density lower.
 Highlight Point Shift helps to reduce gloss differential by adding 
density to the highlights of your image.
The tone color circle adjusts the hue of your black and white print. 
Click on any portion of the color wheel or enter corresponding 
values to customize the tone (hue) added to your print. The closer 
you select to the edge of the wheel, the more color you add.
The preview image approximates the image tone based on your settings. 
Note that this preview always shows the same image and is not color 
managed. It provides a level of feedback as you make changes.
Creating a Custom Preset and Printing
Once you’ve made the correct settings for your print job, create a 
custom preset. This will save you time when you use the same 
profile/printer/ink/media combination for future print jobs.
1. Select 
Summary from the drop-down menu.
2. After verifying that your settings are correct, select 
Save As from the 
Presets drop-down menu. 
3. Type a name for your custom preset and click 
OK.
4. When you’re ready to print, click the 
Print button.
Whenever you want to print with your custom preset, select it from the 
Presets drop-down menu.
Note: If you check the 
settings on each screen 
in the drop-down menu, 
go through them carefully 
from top to bottom. 
Avoid cycling through 
them repeatedly, or you 
may lose your settings.
Caution: Do not open 
and close the Presets 
menu without typing a 
name, or you will lose 
your settings.
 
						

							120
120|Printing With Epson Drivers for Macintosh
Managing Print Jobs
After you click Print, you can monitor the progress of your print job. Follow 
these steps:
1. Click the icon for your printer on the Dock. If necessary, double-click 
your printer (and print queue) name. You see a screen like this:
2. From here you can monitor the progress of your print job or do one of 
the following:
Click the print job, then click Delete to cancel the job
Click the print job, then click Hold to pause printing
Click a print job marked “Hold” and click Resume to resume 
printing
3. When you’re finished, close the print job window, then close your 
printer window. 
Note: If it is no longer 
spooling in the computer, 
you can also cancel a 
print job by pressing the 
Pause/reset button 
button on the printer, 
selecting JOB CANCEL, 
and pressing the OK 
button.