Epson Stylus Pro 7900 User Manual

							11
11
This Printer Guide provides important information on setting up and using 
your printer, loading paper, using the Epson® printer drivers, and replacing 
ink cartridges. It also tells you how to maintain your printer to keep it 
working at its best, and provides troubleshooting tips in case you have a 
problem.
For additional information, see the following:
•The Quick Reference Guide provides a handy summary of procedures for 
daily use and printer maintenance—loading paper, replacing ink 
cartridges and other components, cleaning and aligning the print head, 
and using the printer’s menu system. Attach it to your printer for easy 
reference.
The on-screen User’s Guide on the CD-ROM provides additional 
information about the printer, drivers, and utility software. You can read 
the guide using Adobe
® Reader®. 
The on-screen Network Guide on the CD-ROM provides instructions 
for setting up and using your printer on a network.
Warnings, Cautions, Notes, and Tips
Please follow these guidelines as you use this book:
WARNINGS must be followed carefully to avoid bodily injury.
Cautions must be observed to avoid damage to your equipment.
Notes contain important information about your printer.
Tips contain additional hints on how to get the most out of your printer.
Introduction
 
						

							12
12|Introduction
Options and Accessories
Your Epson Stylus® Pro 7900/9900 offers these optional upgrades and 
accessories:
In addition, you can order these user-replaceable items: 
You can purchase optional equipment and genuine Epson ink and paper 
from an Epson Professional Imaging Authorized Reseller. To find the 
nearest reseller, visit www.proimaging.epson.com (U.S. sales), www.epson.ca 
(Canadian sales), or call 800-GO-EPSON (800-463-7766). Or you can 
purchase online at www.proimaging.epson.com (U.S. sales) or 
www.epson.ca (Canadian sales).  Optional equipment 
OptionPart number
Automatic Take-Up Reel System (Pro 9900 only) C12C815321
Epson SpectroProofer
™ 44-inch (Pro 9900 only) SPECTRO44
Epson SpectroProofer 24-inch (Pro 7900 only) SPECTRO24
Epson SpectroProofer 44-inch UV (Pro 9900 only) SPECTRO44UV
Epson SpectroProofer 24-inch UV (Pro 7900 only) SPECTRO24UV
One-year extended warranty EPP900B1
Two-year extended warranty EPP900B2
Tip: Check the Epson Pro 
Imaging website at 
www.proimaging.epson.
com for accessories and 
options that are currently 
available.
Consumables and user-replaceable parts
PartPart number
Replacement maintenance tank (see page 169) C12C890191
Replacement paper cutter (see page 165) C12C815331
Roll media adapters (2) C12C811241
Replacement 44-inch Take-Up Reel Core (Pro 9900 only) C815121
Ink Cartridges  See page 160 for 
a complete list.
 
						

							13
Introduction|13
Where To Get Help
Epson provides technical support and information on the installation, 
configuration, and operation of professional printing products through the 
Epson Preferred  Limited Warranty Plan. Dial (888) 377-6611, 6
AM to 
6
PM, Pacific Time, Monday through Friday. Days and hours of support are 
subject to change without notice. 
Before you call, make sure you have your Unit ID number, which is 
included with the Epson Preferred Limited Warranty Plan information that 
came with your printer. You’ll also need your printer serial number and 
proof of purchase.
Visit Epson’s support website at epson.com/support and select your product 
for solutions to common problems. You can download drivers, firmware, 
and documentation, get FAQs and troubleshooting advice, or e-mail Epson 
with your questions.
Macintosh System Requirements
To use your printer in either a stand-alone or peer-to-peer network 
environment, your Macintosh® system should meet these requirements:
Mac OS® X 10.4.9 or higher
PowerPC® G5, Intel®, or higher processor
At least 2GB of RAM (4GB or more recommended)
At least 32GB of free hard disk space for software and processing files
Quad-speed (4×) or faster CD-ROM or DVD drive for installing the 
printer software
For USB connection: a compliant USB Hi-Speed 2.0 port and a 
shielded USB “AB” cable from Series A (computer) to Series B (printer), 
up to 10 feet (6 m) long
For network connection: Ethernet-equipped Macintosh and a 
Category 5 compatible cable
SMTip: If you experience 
difficulty with the 
toll-free line or your 
Unit ID number, call 
(562) 276-1305.
Caution: Using an 
improperly shielded 
cable—especially a cable 
more than 10 feet (6 m) 
long—may cause the 
printer to malfunction.
Note: USB 2.0 is 
required to run the 
printer at full speed. 
 
						

							14
14|Introduction
Windows System Requirements
To use your printer in either a stand-alone or peer-to-peer network 
environment, your system should meet these requirements:
IBM®-compatible PC with a Pentium® 4, 3 GHz or higher processor 
recommended 
Microsoft® Windows® Vista®, Windows Vista x64, Windows XP 
Professional x64 Edition, or Windows XP
At least 2GB of RAM (4GB or more recommended)
At least 32GB of free hard disk space for software and processing files
Quad-speed (4×) CD-ROM or DVD drive for installing the printer 
software
For USB connection: a Windows-compliant USB Hi-Speed 2.0 port 
and a shielded USB “AB” cable from Series A (computer) to Series B 
(printer), up to 10 feet (6 m) long
For Ethernet connection: Ethernet equipped PC and a Category 5 
compatible cable 
 
						

							15
Introduction|15
Important Safety Instructions
Before using your printer, read the following safety instructions to make sure 
you use the equipment safely and effectively.
The Epson Stylus Pro 7900 weighs about 186 lb (84.5 kg) and the 
Epson Stylus Pro 9900 weighs about 256 lb (116 kg) without the stand, 
paper basket, ink, or paper. Make sure you have four people lift the 
printer. (See page 25.)
When setting up the printer, make sure you have enough space around 
it. You may need more space behind the printer if you print on large 
sheets of heavy stock or posterboard. (See page 21.)
Place the printer on a flat, stable surface. The printer will not operate 
properly if it is tilted or at an angle.
Avoid places subject to rapid changes in temperature and humidity. Also 
keep the printer away from direct sunlight, strong light, or heat sources.
Avoid places subject to shocks and vibrations.
Keep the printer away from dusty areas.
Keep your entire computer system away from potential sources of 
electromagnetic interference, such as loudspeakers or the base units of 
cordless telephones.
Place the printer near a wall outlet where the plug can be easily 
unplugged.
Use only the type of power source indicated on the label.
Connect the printer to a properly grounded outlet. Avoid using an 
outlet on the same circuit as a photocopier or air control system that 
regularly switches on and off.
Avoid using electrical outlets controlled by wall switches or timers.
Use only the power cord that comes with the printer. Use of another 
cord may result in fire or electric shock.
The printer’s power cord is designed for use with the printer only. Using 
it with other equipment may result in fire or electric shock.
Do not use a damaged or frayed power cord.
 
						

							16
16|Introduction

If you use an extension cord with the printer, make sure the total ampere 
rating of devices plugged into the extension cord does not exceed the 
cord’s ampere rating. Also, make sure the total ampere rating of all 
devices plugged into the wall outlet does not exceed the wall outlet’s 
ampere rating.
Do not block or cover the openings in the printer’s case.
Do not put your hand inside the printer during printing.
Do not move the print head by hand unless instructed to do so by an 
Epson service technician; otherwise you may damage the printer.
Do not insert objects through the slots. Take care not to spill liquid on 
the printer.
Do not attempt to service the printer yourself.
Power down the printer from the control panel, unplug the printer, and 
refer servicing to qualified service personnel under the following 
conditions: 
The power cord or plug is damaged; liquid has entered the printer; the 
printer has been dropped or the cabinet damaged; the printer does not 
operate normally or exhibits a distinct change in performance.
Before transporting the printer, make sure the print head is in the far 
right (home) position.
For California customers only:
The lithium batteries in this product contain
Perchlorate Material - special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate.
Caution: Always turn 
the printer off using the 
PPower
 button. When 
you press this button, 
POWER OFF appears on 
the LCD panel and the 
PPower light flashes. 
Do not unplug the printer 
or turn off the power to 
the printer until the  panel 
shuts off and the 
PPower light stops 
flashing. This ensures 
that the print head is 
safely capped.
 
						

							17
Introduction|17
Ink Cartridge Safety Instructions
Keep ink cartridges out of the reach of children and do not drink the 
ink.
Store ink cartridges in a cool, dark place.
If ink gets on your skin, wash it off with soap and water. If ink gets in 
your eyes, flush them immediately with water.
Shake ink cartridges before installing them for best results. 
Do not use an ink cartridge beyond the date printed on the cartridge 
carton.
Use up the ink cartridge within six months of installation for best 
results.
Do not dismantle ink cartridges or try to refill them. This could damage 
the print head.
After bringing an ink cartridge inside from a cold storage site, allow it to 
warm up at room temperature for at least three hours before using it.
The IC chip on the ink cartridge retains a variety of cartridge 
information, which allows you to remove and reinsert it freely. 
However, each time the cartridge is inserted, some ink is consumed 
because the printer automatically performs a reliability check.
If you remove an ink cartridge for later use, protect the ink supply area 
from dirt and dust, and store it in the same environment as this product. 
Note that there is a valve in the ink supply port, making covers or plugs 
unnecessary, but care is needed to prevent ink from staining items that 
the cartridge touches.
Do not touch the ink supply port, its surrounding area, or the green IC 
chip on the side of the ink cartridge. Doing so may affect normal 
operation and printing.
Caution: Do not use too 
much force when you 
shake cartridges that 
have been previously 
installed.
 
						

							18
18|Introduction
Printer Parts
These illustrations show the Epson Stylus Pro 9900, but the parts are the 
same for the Pro 7900 unless otherwise noted.
Front
Back
Roll paper cover
Control 
panel
Ink bay Ink bayFront 
cover
Paper basket
Casters
Roll paper 
holder
Network interface
USB interface 
for computer
AC inlet
Maintenance tank 
(Pro 9900 includes 
two tanks, one on 
each side of printer)
Interface 
connector 
for optional 
equipment
 
						

							19
Introduction|19
Control Panel
LCD Display
LCD 
display
Power 
light and 
button
Pause/reset 
light and buttonInk 
light
Left arrow or paper 
source button Paper 
light
Menu button
Paper feed up button
Paper feed down buttonOK button
Paper cut 
button
Ink open button
Black ink change buttonPaper release (ePlaten™) 
light and button
Platen 
gap
Paper 
sourceRoll paper 
margin
Paper 
number Ink cartridge 
statusRoll paper 
counter
Maintenance 
tank status
Black ink 
indicator Auto Take-Up Reel
Spectro 
Proofer
 
						

							20
20|Introduction