Epson Stylus Pro 7900 User Manual
Here you can view all the pages of manual Epson Stylus Pro 7900 User Manual. The Epson manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 31
31 Setting Up the Printer|31 9. Snap the back pole into the holders as shown. 10. Hook the loops around the pins on the back of the stand legs.
Page 32
32 32|Setting Up the Printer 11. Insert the rod into the fabric channel. 12. Insert the free ends of the rod into the holes in the sides of the stand.
Page 33
33 Setting Up the Printer|33 13. Loop the tabs over the ends of the rod as shown. 14. Attach the paper guides to the bottom of the printer as shown: Now go to “Completing Setup and Connecting the Power Cord” on page 42.
Page 34
34 34|Setting Up the Printer Attaching the Paper Basket (Epson Stylus Pro 9900) The paper basket is a cloth sheet that attaches to the printer stand and catches your prints as they come out. If you have the Epson Stylus Pro 7900, see page 27 for instructions on attaching the paper basket. 1. Make sure you have all the parts shown below. 2. Attach two of the posts to the front of the stand as shown, one on each side. 5 Paper guides3 Square poles 4 Pins Cloth basket 4 Posts2 Black plastic connectors...
Page 35
35 Setting Up the Printer|35 3. Use the pins to fasten the posts in place. 4. Attach the other two posts to the back of the stand.
Page 36
36 36|Setting Up the Printer 5. Use the pins to fasten the posts in place as shown. 6. Insert the round and square poles into the basket cloth as shown:
Page 37
37 Setting Up the Printer|37 7. Place the basket under the printer as shown. 8. Snap the center pole in the holder on each side of the stand.
Page 38
38 38|Setting Up the Printer 9. Insert the black plastic connectors into both ends of the square pole. 10. Fasten the black plastic connectors onto the posts on each side of the stand.
Page 39
39 Setting Up the Printer|39 11. Snap the back pole into the holders as shown. 12. Attach the end pieces to the poles at the back of the basket.
Page 40
40 40|Setting Up the Printer 13. Lift the back of the basket and attach the end pieces to the posts at the back of the stand. 14. Insert the rod into the fabric channel.