Epson Stylus Pro 7700 User Manual

91
Printing With Epson Drivers for Windows|91
Choosing Color Management Options
The printer driver offers several methods for managing the color in your 
prints, including turning the driver’s color management settings off.
If you are using color management settings in Photoshop or another 
application, it is very important to access the advanced settings and turn off 
color management in the printer driver, as described here. (For instructions 
on using Photoshop to manage color, see page 141.)
1. In...

92
92|Printing With Epson Drivers for Windows
3. Choose one of the following settings (if you select Color Controls or 
ICM, click the Advanced button after you select the setting):
 Off (No Color Adjustment) disables color management in the 
printer driver. Choose this mode when you use a color managed 
workflow in Photoshop or other software. See page 141 for 
instructions.
 Color Controls lets you specify individual values for adjusting 
brightness, contrast, saturation, and CMY inks, or choose from...

93
Printing With Epson Drivers for Windows|93

adjusts colors based on the printer’s ICC profile, using the 
Image Color Matching system. You can choose the input profile 
and other settings as shown below.
In most cases, you will get better results by applying color management 
in your application, rather than in the printer driver. See page 141 for 
instructions.
4. Click 
OK to save your settings.
Choosing Roll Paper Options
Follow the steps in this section to print on roll paper and select settings...

94
94|Printing With Epson Drivers for Windows
Save Roll Paper 
saves paper by not feeding the blank portion of the last 
page of your document. Available only if you’ve selected 
Roll Paper 
(Banner)
 as the Source setting. 
3. For the 
Size setting, select the size of your image or output paper.
To make the best use of your roll paper, creating a custom paper size is 
recommended. Select 
User Defined. You see this window:
Type a name for your custom size, then enter the size in hundredths of 
an inch...

95
Printing With Epson Drivers for Windows|95
6. Click the Expansion button to select a borderless sizing option. Choose 
Auto Expand or Retain Size, then click OK.
Auto Expand enlarges your image (up to 3%) to fit the size of the 
paper. You can use the slider to adjust the expansion. 
Retain Size prints your image at the size you specify in your 
application. You need to size it slightly wider than the paper width if 
you want to print without borders. See page 86 for more information.
The widths shown...

96
96|Printing With Epson Drivers for Windows
8. Choose one of the following Auto Cut settings:
 allows margin space at the top and bottom of each 
image.
 Double Cut extends the space between images and trims each print 
individually. This provides the cleanest edge for borderless printing.
 Single Cut allows images to be printed end-to-end and saves paper. 
With borderless printing, you may see a sliver of the previous or 
next image if you print multiple images in one print job. You will 
see a white...

97
Printing With Epson Drivers for Windows|97
2. For the Source setting, select Sheet. 
3. For the 
Size setting, select the size of the sheet loaded in the printer.
If the size of your paper is not listed, you can create a custom paper size. 
Select 
User Defined. You see this window:
 

98
98|Printing With Epson Drivers for Windows
Type a name for your custom size, then enter the size in hundredths of 
an inch (or centimeters) and click 
Save. Then click OK.
4. If you want to center your image on the sheet, click 
Printable Area, 
then select 
Centered.
5. If you want to print to the edges of the page, click 
Borderless (not 
available for custom paper sizes). If you’re not printing borderless 
images, go to step 7.
Note that borderless printing applies only to the left and right sides...

99
Printing With Epson Drivers for Windows|99
Choosing Page Layout Options
You can print a poster-size image, even if your application does not support 
poster printing. Follow these steps to reduce or enlarge your image:
1. On the Properties or Preferences window, click the 
Page Layout tab. 
You see this window:
2. Select the settings you want for 
Orientation and Copies.
3. Click 
Reduce/Enlarge if you want to have the driver resize your image. 
You can select 
Fit to Page or Fit to Roll Paper Width,...

100
100|Printing With Epson Drivers for Windows
5. Click Print Bckg Color if you want to print color on the background of 
the page. Click the 
Color Settings button to select the color you want.
6. Click 
Job Settings if you want to have the time, date, and other 
information about your print job printed at the top or bottom of the 
page. Click 
Details, select the settings you want to use, and click OK.
Choosing Paper Configuration Options
If you are using non-Epson media and you need to fine-tune its...