Epson Stylus Pro 7400 User Manual

Printing with Windows51
1
1
1
1
1
1
1
1
1
1
1
1
English
Note:
This setting appears only when the Borderless check box is selected.
Double Cut
Select this setting to avoid the slight gap that occurs with the 
Single Cut setting. A margin is created between pictures, and 
1 mm along the inside of each picture is cut.
Note:
This setting appears only when the Borderless check box is selected.
 

52Printing with Windows
Normal Cut
Select this setting to keep margins at the top and bottom of the 
printed data. 
Off
Select this setting to cut printouts manually. To cut printouts 
manually, follow the steps below.
Note:
When you print on Canvas, only this setting is available.
1. Press the Paper Source l button to select Roll Auto Cut Off 
. 
2. Press the Enter  button.
3. The printer automatically feeds the paper to the cutter guide, 
and the printer becomes offline. Pause appears on the LCD.
4. If...

Printing with Windows53
1
1
1
1
1
1
1
1
1
1
1
1
English
6. After cutting the paper, press the Pause   button. The printer 
becomes online.
Making the Paper Size setting
You can select a paper size that you want to use. Select the proper 
paper size from the Paper Size list.
You can also add a custom paper size, using the steps below.
1. Select User Defined from the Paper Size list. The User Defined 
Paper Size dialog box appears.
2. Enter Paper Size Name, Paper Width and Paper Height, 
and then select...

54Printing with Windows
Making the Copies setting
You can specify the number of copies to print. Enter a number in 
the Copies box, or click the arrow next to the box. You can enter 
any number from 1 to 9999. When printing multiple copies of your 
document, select Collate to print one complete document set at 
a time. Select Reverse Order to print your documents in reverse 
order, starting with the last page.
 

Printing with Windows55
1
1
1
1
1
1
1
1
1
1
1
1
English
Making the Orientation settings
You can specify the direction of printing on the page.
PortraitPrint direction is short edge first, like most magazines.
LandscapePrint direction is long edge first, like many 
spreadsheets.
Rotated by 180°Prints your document upside down.
Note:
This function is not available when Roll Paper (Banner) 
is selected as the Paper Source setting.
 

56Printing with Windows
Making the Printable Area setting
This setting is available when you select Sheet as the Paper 
Source setting. You can make the following setting.
Centered
Select this setting to center printouts.
 

Printing with Windows57
1
1
1
1
1
1
1
1
1
1
1
1
English
Making the Roll Paper Option settings
This setting is available when you select Roll Paper or Roll Paper 
(Banner) as the Paper Source setting. You can make the following 
settings.
Auto Rotate
Note:
This function is available only when Roll Paper is selected as the Paper 
Source setting. 
 

58Printing with Windows This function is effective only when the print data length is shorter 
than the printable width of the roll paper. The print data will 
automatically be turned 90 degrees to print crosswise, saving roll 
paper. 
To enable this function, follow the steps below.
1. Select Auto Rotate. The Roll Width button is activated.
2. Click Roll Width. The Roll Paper Width dialog box appears.
3. Select the installed roll paper size from the pull-down menu.
4. Click OK.
Print Page Line
This...

Printing with Windows59
1
1
1
1
1
1
1
1
1
1
1
1
English
The Print Page Line operation changes according to the Auto Cut 
setting. Check these settings as necessary by referring to the 
printer’s operation.
Save Roll Paper
Note:
This function is available only when Roll Paper (Banner) is selected 
as the Paper Source setting.
This function is effective if you wish to save roll paper, because 
the blank portion of the last page of your printed data is not fed 
through the printer.
To enable this function,...

60Printing with Windows Note:
❏The functions on the Layout menu are not available when Roll 
Paper (Banner) is selected as the Paper Source setting.
❏According to the paper source you choose, some of the functions are 
not available.