Epson Stylus CX9300F User Manual

							Summary of Panel Settings41
English
Photo Print Mode
Color Restoration Setting
Print settings for Photo Print mode
Date None, yyyy.mm.dd, 
mmm.dd.yyyy, 
dd.mmm.yyyyPrints the date your photo was taken.
Bidirectional On, Off Select On to increase the print speed. Select Off to 
improve the print quality (but your photos print more 
slowly).
Expansion Standard, Mid., Min. Select the amount the image is expanded when you 
select Borderless.
Standard: The image is slightly enlarged and cropped to 
fill the sheet of paper.
Mid.: Margins might be printed. (Low expansion rate.)
Min.: Margins might be printed. (Lowest expansion rate.)
Setting ItemDescription
Restoration Select On to restore 
faded photo.
MenuSetting ItemDescription
Paper Type Prem. Glossy, Ultra 
Glossy, Photo 
Paper, Matte-
Paper Size 10 x 15 cm, 13 x 18 
cm, A4-
MenuSetting ItemDescription
 
						

							42Summary of Panel Settings
Setup Mode
Layout Borderless Copies your photo all the way to the edges of the paper.
Note:
Your image is slightly enlarged and cropped to fill the 
sheet of paper. Print quality may decline in the top and 
bottom areas of the printout, or the area may be smeared 
when printing.
With Border Copies your original with a standard 3-mm margin.
Quality Standard -
Expansion Standard, Mid., Min. Select the amount the image is expanded when you 
select Borderless.
Standard: The image is slightly enlarged and cropped to 
fill the sheet of paper.
Mid.: Margins might be printed. (Low expansion rate.)
Min.: Margins might be printed. (Lowest expansion rate.)
Fax Settings Speed Dial Setup Add Entry, Edit Entry, Delete Entry
Scan & Print Setup Resolution, Contrast, Paper Size, Auto 
Reduction, Last Trans.
Communication DRD, ECM, V.34, Rings to Answer, Dial 
Tone Detection
Header & Time Fax Header, Date/Time, Your Phone 
Number, Daylight Time
Ink Levels
MenuSetting ItemDescription
 
						

							Summary of Panel Settings43
English
Maintenance Nozzle Check Print a nozzle check pattern to check the 
condition of the print head.
Head Cleaning Clean the print head to improve the 
condition of the print head.
LCD Brightness -10 to +10
Head Alignment Adjust the alignment of the print head.
Change Ink Cartridge Change ink cartridges before they are 
expended.
Language
Country/Region
Display Format 1-up with Info, 1-up without Info, View 
Thumbnail Images
Beep On, Off
PictBridge Setup Set the print settings when printing with a PictBridge device.
Restore Default Settings Reset the LCD panel settings to the factory default settings.
 
						

							
Supply Ink Cartridges
Available ink cartridge sizes vary by location.
Printer NameBlackCyanMagentaYellow
Stylus CX9300F Series T0731
T0731H T0732 T0733 T0734
Stylus DX9400F Series T0711
T0711H T0712 T0713 T0714