Epson Stylus CX9300F User Manual

Maintenance31
English
4. Press xStart.
The printer begins cleaning the print 
head. Follow the message on the LCD 
screen.
c
Caution:
Never turn off the printer while head cleaning 
is in progress. You may damage it.
5. When cleaning finishes, a message is 
displayed on the LCD screen. Press 
xStart to print a nozzle check pattern to 
check the results (&“Checking the print 
head” on page 30).
If there are still gaps or the test patterns 
are faint, run another cleaning cycle and 
check the nozzles...

32Solving Problems
Solving Problems
See your online User’s Guide for help on 
using the printer with a computer.
Error MessagesProblems and SolutionsSetup problems
LCD screen came on and then went out.
■The printer’s voltage may not match the 
outlet rating. Turn off the printer and 
unplug it immediately. Then, check the 
printer labels.
c
Caution
If the voltage does not match, DO NOT 
PLUG YOUR PRINTER BACK IN. Contact 
your dealer.
The printer makes noise after you turn it 
on.
■Make sure the...

Solving Problems33
English
The terms on the LCD screen are not 
displayed in your language.
■If the language displayed on the LCD 
screen is not the one you want, select the 
language you want from the Setup menu.
Faxing problems
■If you have problems sending a fax, make 
sure the phone cable is connected 
correctly and verify that the phone line 
works by connecting a phone to it. Also 
make sure that your recipient’s fax 
machine is turned on and working.
■If you have problems receiving a fax, 
make...

34Solving Problems
Print quality problems
You see banding (light lines) in your 
printouts or copies.
■Clean the print head (&“Checking the 
print head” on page 30).
■Make sure you select the correct paper 
type (&“Selecting Paper” on page 8).
■Make sure the printable (whiter or 
glossier) side of the paper is face up.
■Use up ink cartridges within six months 
after installing them.
■The ink cartridges may need replacing 
(&“Removing and Installing Ink 
Cartridges” on page 27).
■Align the print head...

Solving Problems35
English
■Make sure you loaded the right paper and 
selected the correct setting for it on the 
LCD screen.
■If your paper runs out, replace it as soon 
as possible. If the printer is left without 
paper for a long period of time, the colors 
of your next copy or print job may be 
incorrect.
Your printout is too dark. 
■If you are copying, press xMenu and 
adjust the Density.
The image size or position is incorrect. 
■Make sure you loaded the right paper and 
selected the correct...

36Solving Problems
5. Carefully remove the jammed paper.
6. Close the document cover.
7. If the LCD screen is displaying paper 
jam information, press OK.
If the LCD screen is displaying a paper 
jam error, select OK and then press OK.
For more solutions
If you cannot solve the problem using the 
troubleshooting, contact customer support 
services for assistance. You can find 
customer support information for your area 
in your online Users Guide or warranty 
card. If it is not listed there, contact the...

Summary of Panel Settings37
English
Summary of Panel Settings
Fax Mode
Sending settings for Fax mode
MenuSetting itemDescription
Send To 1, 2, 3, 4, 5, 6, 7, 8, 
9, 0, *, #, -Enter fax numbers.
Color/B&W Color, B&W Select color or black and white faxing.
MenuSetting itemDescription
Resolution Standard, Fine, 
PhotoSelect this option to change the resolution for fax data 
you are sending.
Contrast -4 to +4 Select this option to change the contrast for fax data you 
are sending.
Delayed Sending Off, On...

38Summary of Panel Settings
Fax report settings for Fax mode
Copy Mode
MenuDescription
Speed Dial Prints the speed dial list.
Fax Log Prints the communication log for all recorded communications.
Last Transaction Prints the latest communication in the log (transmission and polling reception).
Reprint Faxes Reprints the faxes received so far.
Protocol Trace Prints the latest protocol trace for one communication.
MenuSetting ItemDescription
Copies 1 to 99 -
Color/B&W Color, B&W -
Layout With Border Copies...

Summary of Panel Settings39
English
Print settings for Copy mode
MenuSetting ItemDescription
Zoom Actual, Auto Fit 
PageSelect Actual to print your photo at its original size. 
Select Auto Fit Page for borderless printing and resizing 
the image to fit various common paper sizes. You can 
also resize the original to a specific scale using Copies + 
or -.
When using the automatic document feeder, you can 
only select Actual (100%).
Paper Type Plain Paper, Matte, 
Prem. Glossy, Ultra 
Glossy, Photo...

40Summary of Panel Settings
Memory Card Mode
Print settings for Memory Card mode
Setting ItemDescription
View and Print Photos Prints only the photos that you choose.
Print All Photos Prints all the photos on your memory card.
Print by Date Prints photos by the date they ware taken.
Print Index Sheet Prints thumbnails of the photos on your memory card and lets you select 
which ones you want to print.
Slide Show Displays all photos on your memory card as a slide show and prints 
photos that you choose....