Epson R2000 Service Manual

Stylus Photo R1900/R2880/R2000Revision E
Stylus Photo R2000 Adjustment191
Confidential8.4.3  Required AdjustmentsThe table below lists the required adjustments depending upon the parts being repaired or replaced. Find the part(s) you removed or replaced, and check which 
adjustment(s) must be carried out. About the First dot position adjustment,  its included in the PW adjustment.
Table 8-17. Required Adjustment List
Priority
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
PF Belt tension...

Stylus Photo R1900/R2880/R2000Revision E
Stylus Photo R2000 Adjustment192
Confidential
Note : “O” indicates that the adjustment must be carried out. “---” indicates that the adjustment 
is not required. If you have removed or replaced multiple parts, make sure to check the 
required adjustments for the all parts. And when multiple adjustments must be carried 
out, be sure to carry out them in the order given in the “Priority” row.
Note *1  :When only removing the ASF Assy, you do not need to perform the...

Stylus Photo R1900/R2880/R2000Revision E
Stylus Photo R2000 Adjustment193
Confidential8.4.4  Adjusment ProcedureMac address setting
This printer have a network function and stores there MAC address (Media Access 
Control Address) in the EEPROM on the Network Board. The Network Board supplied 
as an ASP does not come with the MAC address written on it, therefore, you are 
required to set the MAC address to the new Network Board after replacement. The 
following explains the procedure.

When replacing the...

Stylus Photo R1900/R2880/R2000Revision E
Stylus Photo R2000 Adjustment194
Confidential 1. Start the adjustment program.
2. Select the “Initial Setting” from the menu. The initial setting screen appears.
3. Enter the last six digits of MAC address into the MAC address entry field, and 
click the MAC Address input button.
(Enter the address again into the second entry field to confirm it.)
4. Select the network status sheet print menu on the printer’s control panel, and print 
the sheet. Check the MAC...

Stylus Photo R1900/R2880/R2000Revision E
Stylus Photo R2000 Adjustment195
Confidential Colorimetric Calibration
The procedure of this adjustment is same as Stylus Photo R1900 / 
R2880. Refer to  5.2.4 Colorimetric Calibration 
(p.153)
. But, support 
paper for Calibration Chart is different from the previous models.
Table 8-18. Support Paper for Colorimetric Calibration
Multi Sensor Adjustment (Ink Mark Sensor Adjustment)
1. Print the Nozzle Check Pattern to check not to appear dot missing.
2. Click...

Stylus Photo R1900/R2880/R2000Revision E
Stylus Photo R2000 Adjustment196
ConfidentialFigure 8-18. Pattern for Multi Sensor Adjustment (Ink Mark Sensor adjustment)
No dot missing patternsEight dot missings patterns(Dot-missing counts)
The counts show Sensor could recognize the Dot missing for
each color.
Count-Alignment : Y - M - Mk - R - Or - Pk - GO - C
Pattern-Alignment : 
Y - M - C - Mk
Pk- R - Or
Go