Home > Epson > Projector > Epson Proyector S 12 Manual

Epson Proyector S 12 Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Epson Proyector S 12 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    
    8.
    Push inthe lamp firmly andtighten thescrews tosecure it.
     9.
    Replace thelamp cover andtighten thescrew tosecure it.
     Note:
    Besure thelamp cover issecurely installedorthe lamp willnot come on.
     101   
    						
    							
    
    Reset
    thelamp timer tozero tokeep trackofthe new lamp ’s usage.
     Parent
    topic:Projector LampMaintenance
     Related
    tasks
     Resetting
    theLamp Timer
     Resetting
    theLamp Timer
     You
    must reset thelamp timer afterreplacing theprojectors lamptoclear thelamp replacement
     message
    andtokeep trackoflamp usage correctly.
     Note:
    Donot reset thelamp timer ifyou have notreplaced thelamp toavoid inaccurate lampusage
     information.
    
    1.
    Turn onthe projector.
     2.
    Press theMenu button.
     3.
    Select theReset menuandpress Enter.
     4.
    Select ResetLampHours andpress Enter.
     You
    seeaprompt askingifyou want toreset thelamp hours.
     5.
    Select Yesandpress Enter.
     6.
    Press Menu orEsc toexit themenus.
     Parent
    topic:Projector LampMaintenance
     102 
    						
    							
    
    Related
    tasks
     Replacing
    theLamp
     Replacing
    theRemote ControlBatteries
     The
    remote controlusestwoAAmanganese oralkaline batteries. Replacethebatteries assoon asthey
     run
    out.
     Caution:
    Useonly thetype ofbatteries specified inthis manual. Donot install batteries ofdifferent types,
     or
    mix new andoldbatteries.
     1.
    Open thebattery coverasshown.
     2.
    Remove theoldbatteries.
     Warning:
    Ifthe battery fluidhasleaked, wipeitaway withasoft cloth andavoid getting thefluid on
     your
    hands. Ifitgets onyour hands, washthemimmediately toavoid injury.
     103  
    						
    							
    
    3.
    Insert thebatteries withthe+and –ends facing asshown.
     4.
    Close thebattery coverandpress itdown untilitclicks intoplace.
     Warning:
    Disposeofused batteries according tolocal regulations. Donot expose batteries toheat
     or
    flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery
     dangerous
    ifswallowed.
     Parent
    topic:Projector Maintenance
     Related
    references
     Remote
    ControlOperation
     104   
    						
    							
    
    Transporting
    theProjector
     The
    projector containsprecision parts,someofwhich areglass. Follow theseguidelines totransport or
     ship
    theprojector safely:
     •
    Close thelens cover toprotect thelens.
     •
    Remove anyequipment connectedtothe projector.
     •
    Use acarrying casetohand-carry theprojector.
     •
    When transporting theprojector along distance oras checked luggage, placeitin acarrying case.
     Then
    packthecase inafirm boxwith cushioning arounditand mark thebox Fragile.
     •
    When shipping theprojector forrepairs, placeitin its original packing materials, ifpossible, oruse
     equivalent
    materialswithcushioning aroundtheprojector. Markthebox Fragile.
     Note:
    Epson shallnotbeliable forany damages incurredduringtransportation.
     Parent
    topic:Maintaining andTransporting theProjector
     105 
    						
    							
    
    Solving
    Problems
     Check
    thesolutions inthese sections ifyou have anyproblems usingtheprojector.
     Projection
    ProblemTips
     Projector
    LightStatus
     Using
    theProjector HelpDisplays
     Solving
    ImageorSound Problems
     Solving
    Projector orRemote ControlOperation Problems
     Where
    toGet Help
     Projection
    ProblemTips
     If
    the projector isnot working properly, tryturning itoff and unplugging it.Then plugitback inand turn it
     on.
    
    If
    this does notsolve theproblem, checkthefollowing:
     •
    The lights onthe projector mayindicate whattheproblem is.
     •
    The projectors Helpsystem candisplay information aboutcommon problems, ifthe projector is
     operating.
    
    •
    The solutions inthis manual canhelp yousolve many problems.
     If
    none ofthese solutions help,youcancontact Epsonfortechnical support.
     Parent
    topic:Solving Problems
     Projector
    LightStatus
     The
    lights onthe projector indicatetheprojector statusandletyou know when aproblem occurs.Check
     the
    status andcolor ofthe lights andlook forasolution inthe table here.
     106 
    						
    							
    
    1
     Power
    light
     2
     Lamp
    light
     3
     Temperature
    light
     Power
    light
     Lamp
    light
     Temperature
     Status
    andsolution
     light
    
    Green
     Off
     Off
     Normal
    operation.
     Flashing
    green
     Off
     Off
     Warming
    up.Wait foranimage toappear.
     Orange
     Off
     Off
     Standby
    orsleep mode.
     Flashing
    orange
     Off
     Off
     Preparing
    formonitoring orshutting down.(When
     the
    light remains orange,youcanunplug the
     projector.)
    
    107  
    						
    							
    
    Power
    light
     Lamp
    light
     Temperature
     Status
    andsolution
     light
    
    Flashing
    red
     Off
     Flashing
    orange
     Projector
    istoo hot.
     •
    Make surethatthevents andairfilter arenot
     clogged
    withdust orobstructed bynearby
     objects.
    
    •
    Make suretheenvironmental temperatureisnot
     too
    hot.
     •
    Ifoverheating continues,cleanorreplace theair
     filter.
    
    Red
     Off
     Red
     Projector
    hasoverheated andturned off.Leave it
     turned
    offtocool down forfive minutes.
     •
    Make surethatthevents andairfilter arenot
     clogged
    withdust orobstructed bynearby
     objects.
    
    •
    Ifoperating theprojector athigh altitude, turnon
     High
    Altitude Mode.
     •
    Ifoverheating continues,cleanorreplace theair
     filter.
    
    •
    Ifthe problem persists, unplugtheprojector and
     contact
    Epsonforhelp.
     Red
     Flashing
    red
     Off
     Lamp
    hasaproblem.
     •
    Check tosee ifthe lamp isburned out,broken,
     or
    installed incorrectly. Reseatorreplace the
     lamp
    asnecessary.
     •
    Ifoperating theprojector athigh altitude, turnon
     High
    Altitude Mode.
     •
    Ifthe problem persists, unplugtheprojector and
     contact
    Epsonforhelp.
     Light
    status
     Flashing
     Off
     Replace
    thelamp soon toavoid damage. Donot
     varies
     orange
     continue
    usingtheprojector.
     Red
     Off
     Flashing
    red
     A
    fan orsensor hasaproblem. Turntheprojector
     off,
    unplug it,and contact Epsonforhelp.
     108 
    						
    							
    
    Power
    light
     Lamp
    light
     Temperature
     Status
    andsolution
     light
    
    Red
    orflashing
     Flashing
    red
     Flashing
    red
     Internal
    projector error.Turntheprojector off,
     red
     unplug
    it,and contact Epsonforhelp.
     Note:
    Ifthe lights display apattern notlisted inthe table above, turntheprojector off,unplug it,and
     contact
    Epsonforhelp.
     Parent
    topic:Solving Problems
     Related
    references
     Projector
    SetupSettings -Extended Menu
     Where
    toGet Help
     Related
    tasks
     Cleaning
    theAirFilter andVents
     Replacing
    theAirFilter
     Replacing
    theLamp
     Using
    theProjector HelpDisplays
     You
    candisplay information tohelp yousolve common problems usingtheprojectors Helpsystem.
     1.
    Turn onthe projector.
     2.
    Press theHelp button onthe projector orthe remote control.
     You
    seetheHelp menu.
     3.
    Use theupand down arrow buttons tohighlight theproblem youwant tosolve.
     4.
    Press Entertoview thesolutions.
     5.
    When youarefinished, doone ofthe following:
     •
    To select another problem tosolve, pressEsc.
     •
    To exit thehelp system, pressHelp.
     Parent
    topic:Solving Problems
     Solving
    ImageorSound Problems
     Check
    thesolutions inthese sections ifyou have anyproblems withprojected imagesorsound.
     109 
    						
    							
    
    Solutions
    WhenNoImage Appears
     Solutions
    WhenImage isIncorrect UsingtheUSB Display Function
     Solutions
    WhenNo Signal Message Appears
     Solutions
    WhenNot Supported Message Appears
     Solutions
    WhenOnlyaPartial ImageAppears
     Solutions
    WhentheImage isNot Rectangular
     Solutions
    WhentheImage Contains NoiseorStatic
     Solutions
    WhentheImage isFuzzy orBlurry
     Solutions
    WhentheImage Brightness orColors areIncorrect
     Solutions
    WhenThereisNo Sound orLow Volume
     Parent
    topic:Solving Problems
     Solutions
    WhenNoImage Appears
     If
    no image appears, trythe following solutions:
     •
    Press theA/V Mute button onthe remote controltosee ifthe image wastemporarily turnedoff.
     •
    Make sureallnecessary cablesaresecurely connected andthepower ison for the projector and
     connected
    videosources.
     •
    Press theprojectors powerbutton towake itfrom standby orsleep mode. Alsoseeifyour connected
     computer
    isin sleep mode ordisplaying ablank screen saver.
     •
    Check thesettings onthe Signal menutomake suretheyarecorrect forthe current videosource.
     •
    Adjust theBrightness settingorselect theNormal PowerConsumption setting.
     •
    Check theDisplay settingtomake sureMessages isset toOn .
     •
    Ifthe projector doesnotrespond whenyoupress thecontrol panelbuttons, thebuttons maybe
     locked.
    Unlockthebuttons.
     •
    Ifthe projector doesnotrespond whenyoupress buttons onthe remote control, makesuretheremote
     receivers
    areturned on.
     •
    For images projected withWindows MediaCenter, reducethescreen sizefrom fullscreen mode.
     •
    For images projected fromapplications usingWindows DirectX,turnoffDirectX functions.
     Parent
    topic:Solving ImageorSound Problems
     Related
    references
     Projector
    SetupSettings -Extended Menu
     Image
    Quality Settings -Image Menu
     110 
    						
    All Epson manuals Comments (0)

    Related Manuals for Epson Proyector S 12 Manual