Epson Projector PowerLite W16 User Manual

							

1.
Open thebattery coverasshown.
 2.
Insert thebatteries withthe+and –ends facing asshown.
 41   
						

							

3.
Close thebattery coverandpress itdown untilitclicks intoplace.
 Warning:
Disposeofused batteries according tolocal regulations. Donot expose batteries toheat
 or
flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery
 dangerous
ifswallowed.
 Parent
topic:Setting Upthe Projector
 Related
references
 Remote
ControlSpecifications
 Opening
theLens Cover
 1.
Toopen theprojectors lenscover, slidetheA/V Mute slidelever.
 2.
Tocover thelens ortemporarily turnoffthe projected pictureandsound, slidetheA/V Mute slide
 cover
closed.
 42   
						

							

Parent
topic:Setting Upthe Projector
 43 
						

							

Using
BasicProjector Features
 Follow
theinstructions inthese sections touse your projectors basicfeatures.
 Turning
Onthe Projector
 Turning
Offthe Projector
 Viewing
3DImages
 Selecting
theLanguage forthe Projector Menus
 Adjusting
theImage Height
 Image
Shape
 Resizing
theImage WiththeZoom Ring
 Focusing
theImage UsingtheFocus Ring
 Focusing
theImage withFocus Help
 Remote
ControlOperation
 Selecting
anImage Source
 Projection
Modes
 Image
Aspect Ratio
 Color
Mode
 Controlling
theVolume withtheVolume Buttons
 Projecting
aSlide Show
 Turning
Onthe Projector
 Turn
onthe computer orvideo equipment youwant touse before youturn onthe projector soitcan
 display
theimage source.
 1.
Open theprojectors lenscover.
 44  
						

							

2.
Connect thepower cordtothe projectors powerinlet.
 3.
Plug thepower cordintoanelectrical outlet.
 The
projectors powerlightturns orange. Thisindicates thattheprojector isreceiving power,butis
 not
yetturned on(itisin standby mode).
 Note:
WithDirect Power Onturned on,theprojector turnsonassoon asyou plug itin.
 4.
Press thepower button onthe projector orthe remote controltoturn onthe projector.
 The
projector beepsandthepower lightflashes greenasthe projector warmsup.After about five
 seconds,
thepower lightstops flashing andturns green.
 Warning:
Neverlookintotheprojector lenswhen thelamp ison. This candamage youreyes andis
 especially
dangerous forchildren.
 If
you donot see aprojected imagerightaway, trythe following:
 •
Verify thelens cover isopen allthe way.
 •
Turn onthe connected computerorvideo device.
 45  
						

							

•
Insert aDVD orother video media, andpress theplay button (ifnecessary).
 •
Press theSource Searchbuttononthe projector orremote controltodetect thevideo source.
 Parent
topic:UsingBasicProjector Features
 Related
references
 Projector
SetupSettings -Extended Menu
 Turning
Offthe Projector
 Before
turning offthe projector, shutdown anycomputer connected toitso you canseethecomputer
 display
duringshutdown.
 Note:
Turnoffthis product whennotinuse toprolong thelifeofthe projector. Lamplifewill vary
 depending
uponmode selected, environmental conditions,andusage. Brightness decreasesovertime.
 1.
Press thepower button onthe projector orthe remote control.
 The
projector displaysashutdown confirmation screen.
 2.
Press thepower button again.(Toleave iton, press anyother button.)
 The
projector beepstwice,thelamp turns off,and thepower lightturns orange.
 Note:
WithEpsons InstantOfftechnology, thereisno cool-down periodsoyou canpack upthe
 projector
fortransport rightaway (ifnecessary).
 Caution:
Donot turn theprojector onimmediately afterturning itoff. Turning theprojector onand off
 frequently
mayshorten thelifeofthe lamp.
 46 
						

							

3.
Totransport orstore theprojector, makesurethepower lightisorange (butnotflashing), then
 unplug
thepower cord.
 Caution:
Toavoid damaging theprojector orlamp, never unplug thepower cordwhen thepower
 light
isgreen orflashing orange.
 4.
Close theprojectors lenscover.
 Parent
topic:UsingBasicProjector Features
 47   
						

							

Viewing
3DImages
 You
canview 3Dimages usingyourprojector.
 1.
Connect a3D-compatible videodevice tothe projector usingacompatible HDMIcable.
 2.
Turn onthe video device, thenturnonthe projector.
 3.
Begin playback fromthevideo device.
 Note:
Makesureyousetthe video device toplay content in3D mode.
 4.
Press the2D/3D buttononthe remote controltoactivate 3Dmode, ifnecessary.
 5.
Slide thepower switch onthe 3Dglasses tothe Onposition.
 6.
Putonthe 3Dglasses. Ifyou donot see a3D image, pairtheglasses withtheprojector.
 Pairing
the3DGlasses withtheProjector
 Charging
the3DGlasses
 3D
Viewing Range
 Parent
topic:UsingBasicProjector Features
 48   
						

							

Related
tasks
 Connecting
toan HDMI Video Source
 Connecting
toaComputer forHDMI Video andAudio
 Pairing
the3DGlasses withtheProjector
 Pair
theglasses withtheprojector toestablish communication betweenthemfor3D viewing.
 1.
Turn onthe projector.
 2.
Settheimage source toHDMI.
 3.
Slide thepower switch onthe 3Dglasses tothe Onposition.
 4.
Move theglasses within10feet (3m) ofthe projector, thenholddown thePairing buttononthe
 glasses
foratleast three seconds.
 The
status lightonthe glasses flashesgreenandred. Ifpairing issuccessful, thelight turns green
 for
ten seconds andthen turns off.
 Parent
topic:Viewing 3DImages
 49   
						

							

Charging
the3DGlasses
 Charge
theglasses whenthestatus lightonthe glasses flashesredtoindicate alow battery.
 1.
Connect thesmaller endofthe charging cabletothe port onthe bridge ofthe glasses.
 Note:
Makesureyouconnect thecable inthe correct orientation oryou may damage theglasses or
 cable.

2.
Connect theother endofthe cable tothe USB-A portonthe projector.
 Note:
Theprojector mustbeturned ontocharge theglasses.
 The
glasses arefully charged whenthestatus lightonthe glasses staysgreen.
 Parent
topic:Viewing 3DImages
 3D
Viewing Range
 When
youview 3Dimages, makesureyouarepositioned withintheviewing rangeshown here.
 50