Epson Projector PowerLite W16 User Manual
Have a look at the manual Epson Projector PowerLite W16 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Related references Input Signal Settings -Signal Menu Supported VideoDisplay Formats Solutions WhenOnlyaPartial ImageAppears If only apartial computer imageappears, trythe following solutions: • Press theAuto button onthe remote controltooptimize theimage signal. • Try adjusting theimage position usingthePosition menusetting. • Press theAspect buttononthe remote controltoselect adifferent imageaspect ratio. • Ifyou zoomed intoorout ofthe image usingtheE-Zoom buttons,presstheEsc button twicetoreturn to afull display. • Check yourcomputer displaysettings todisable dualdisplay andsetthe resolution withinthe projectors limits.(Seeyourcomputer manualfordetails.) • Check theresolution assignedtoyour presentation filestosee ifthey arecreated foradifferent resolution thanyouareprojecting in.(See yoursoftware helpfordetails.) Parent topic:Solving ImageorSound Problems Related references Input Signal Settings -Signal Menu Supported VideoDisplay Formats Solutions WhentheImage isNot Rectangular If the projected imageisnot evenly rectangular, trythe following solutions: • Place theprojector directlyinfront ofthe center ofthe screen, facingitsquarely, ifpossible. • Ifyou adjusted theprojector heightusingtheprojector feet,press thekeystone buttonsonthe projector toadjust theimage shape. • Turn onautomatic keystoneadjustments usingtheprojectors menus. • Press theScreen Fitbutton andadjust theimage shape usingtheon-screen display. • Adjust theQuick Corner settingtocorrect theimage shape. Parent topic:Solving ImageorSound Problems Related references Projector FeatureSettings -Settings Menu 121
Related tasks Correcting ImageShape withtheKeystone Buttons Automatically CorrectingImageShape WithScreen Fit Correcting ImageShape withQuick Corner Solutions WhentheImage Contains NoiseorStatic If the projected imageseems tocontain electronic interference (noise)orstatic, trythe following solutions: • Check thecables connecting yourcomputer orvideo source tothe projector. Theyshould be: • Separated fromthepower cordtoprevent interference • Securely connected atboth ends • Not connected toan extension cable • Check thesettings onthe projectors Signalmenutomake suretheymatch thevideo source. If available foryour video source, adjusttheProgressive andNoise Reduction settings. • Select acomputer videoresolution thatiscompatible withtheprojector. • Ifyou areprojecting fromacomputer, presstheAuto button onthe remote controltoautomatically adjust theTracking andSync settings. • Ifyou adjusted theimage shape usingtheprojector controls,trydecreasing theSharpness settingto improve imagequality. • Ifyou connected anextension powercable,tryprojecting withoutitto see ifitcaused interference in the signal. • Ifyou areusing theUSB Display function, turnoffthe Transfer layeredwindow settinginthe Epson USB Display Settings program onyour computer. Parent topic:Solving ImageorSound Problems Related references Input Signal Settings -Signal Menu Supported VideoDisplay Formats Image Quality Settings -Image Menu Solutions WhentheImage isFuzzy orBlurry If the projected imageisfuzzy orblurry, trythe following solutions: • Adjust theimage focus. 122
• Clean theprojector lens. Note: Toavoid condensation onthe lens after bringing theprojector infrom acold environment, letthe projector warmuptoroom temperature beforeusingit. • Position theprojector closeenough tothe screen. • Position theprojector sothe keystone adjustment angleisnot sowide thatitdistorts theimage. • When usingtheScreen Fitfeature, position theprojector atacompatible distancefromthescreen or adjust theimage shape manually. • Turn onautomatic keystoneadjustment inthe projectors menus. • Adjust theSharpness settingtoimprove imagequality. • Ifyou areprojecting fromacomputer, presstheAuto button onthe remote controltoautomatically adjust thetracking andsync. Ifany bands oroverall blurriness remain,displayauniformly patterned image onthe screen andmanually adjusttheTracking andSync settings. • Ifyou areprojecting fromacomputer, usealower resolution. Parent topic:Solving ImageorSound Problems Related references Projection Distance Projector FeatureSettings -Settings Menu Image Quality Settings -Image Menu Related tasks Focusing theImage UsingtheFocus Ring Focusing theImage withFocus Help Cleaning theLens Automatically CorrectingImageShape WithScreen Fit Solutions WhentheImage Brightness orColors areIncorrect If the projected imageistoo dark orlight, orthe colors areincorrect, trythe following solutions: • Press theColor Mode button onthe remote controltotry different colormodes forthe image and environment. • Adjust theavailable settingsonthe Image menuforthe current inputsource, suchasBrightness , Contrast ,Tint ,Color Adjustment ,and/or ColorSaturation . 123
• Make sureyouselected thecorrect InputSignal orVideo Signal settingonthe Signal menu,if available foryour image source. • Make sureallthe cables aresecurely connected tothe projector andyour video device. Ifyou connected longcables, tryconnecting shortercables. • Ifyou areusing theECO Power Consumption setting,tryselecting Normalinthe Settings menu. Note: Athigh altitudes orlocations subjecttohigh temperatures, theimage maybecome darkerand you may notbeable toadjust thePower Consumption setting. • Ifthe image hasbeen progressively darkening,youmay need toreplace theprojector lampsoon. Parent topic:Solving ImageorSound Problems Related concepts Projector LampMaintenance Related references Image Quality Settings -Image Menu Input Signal Settings -Signal Menu Projector FeatureSettings -Settings Menu Solutions Whena3D Image DoesNotDisplay Correctly If a 3D image doesnotdisplay correctly, trythe following solutions: • Press the2D/3D buttononthe remote controltoswitch to3D mode, ifnecessary. Youcanalso activate 3Dmode bysetting the3DDisplay settingonthe Signal menutoOn . • Make sureyourvideo device andmedia areboth 3D-compatible. Refertothe documentation that came withyour video device formore information. • Make sureyouareusing anHDMI cablethatsupports 3Dsignals. • Make sureyouselected thecorrect 3DFormat settingonthe Signal menu.Normally thisshould be set toAuto ,but insome cases youmay need toselect adifferent settingtomatch the3Dsignal from your video device. • Make sureyouareusing 3Dactive shutter glasses. Youcanpurchase themfromEpson. • Make sureyour3Dglasses areturned onand fully charged. Ifthe glasses haveentered standby mode, slidethepower switch onthe glasses tothe Off position andthen back tothe Onposition. • Make sureyour3Dglasses arepaired withtheprojector. • Make sureyouarewithin the3Dviewing range. 124
• Avoid usingtheprojector nearwireless networks, microwave ovens,2.4GHz cordless phones,or other devices thatusethe2.4GHz frequency band.These devices caninterfere withthesignal between theprojector andthe3Dglasses. • Ifthe other solutions donot notsolve theproblem, changetheInverse 3DGlasses settingonthe Signal menu.Return thesetting toits original valueifchanging itdoes notsolve theproblem. Parent topic:Solving ImageorSound Problems Related references Input Signal Settings -Signal Menu Optional Equipment andReplacement Parts 3D Viewing Range Related tasks Charging the3DGlasses Pairing the3DGlasses withtheProjector Solutions WhenNoImage Appears onanExternal Monitor If no image appears onaconnected externalmonitor, trythe following solutions: • Make sureaVGA cable isconnected toyour computer andtheprojectors Computer1 port. • Make sureyourexternal monitors cableisconnected tothe monitor andtothe projectors Monitor Out port. • Make sureyousetthe Monitor OutPort setting toMonitor Out. Parent topic:Solving ImageorSound Problems Related references Projector SetupSettings -Extended Menu Solutions toSound Problems If there isno sound whenyouexpect itor the volume istoo low, trythe following solutions: • Adjust theprojectors volumesettings. • Press theA/V Mute button onthe remote controltoresume videoandaudio ifthey were temporarily stopped. • Press theSource Searchbuttontoswitch tothe correct inputsource, ifnecessary. • Check yourcomputer orvideo source tomake surethevolume isturned upand theaudio output isset for the correct source. 125
• Check theaudio cableconnections betweentheprojector andyour video source. • Ifyou donot hear sound fromanHDMI source, setthe connected devicetoPCM output. • Make sureanyconnected audiocables arelabeled NoResistance. • Ifyou areusing theUSB Display function, turnonthe Output audiofromtheprojector settinginthe Epson USBDisplay Settings program onyour computer. • Ifyou areusing aMac andyoudonot hear sound fromanHDMI source, makesureyourMac supports audiothrough theHDMI port.Ifnot, youneed toconnect anaudio cable. • Ifyou want touse aconnected audiosource whentheprojector isoff, setthe Standby Modeoption to Communication Onand turn onthe Standby Audiooption. Parent topic:Solving ImageorSound Problems Related concepts Projector Connections Related references Projector SetupSettings -Extended Menu Related tasks Controlling theVolume withtheVolume Buttons Solving Projector orRemote ControlOperation Problems Check thesolutions inthese sections ifyou have problems operating theprojector orremote control. Solutions toProjector PowerorShut-Off Problems Solutions toProblems withtheRemote Control Solutions toPassword Problems Parent topic:Solving Problems Solutions toProjector PowerorShut-Off Problems If the projector doesnotcome onwhen youpress thepower button oritshuts offunexpectedly, trythe following solutions: • Make surethepower cordissecurely connected tothe projector andtoaworking electrical outlet. • The projectors buttonsmaybelocked forsecurity. Unlockthebuttons oruse theremote controlto turn onthe projector. • The power cordmaybedefective. Disconnect thecord andcontact Epson. 126
• Ifthe projectors lampshuts offunexpectedly, itmay have entered sleepmode afteraperiod of inactivity. Beginapresentation towake theprojector. • Ifthe projectors lampshuts offand thepower andTemp lightsarered, theprojector hasoverheated and shut off.Check thesolutions forthis light status. • Ifthe power button onthe remote controldoesnotturn onthe projector, checkitsbatteries andmake sure theRemote Receiver settingisturned oninthe projectors menu,ifavailable. Parent topic:Solving Projector orRemote ControlOperation Problems Related references Where toGet Help Projector LightStatus Projector FeatureSettings -Settings Menu Related tasks Unlocking theProjector s Buttons Solutions toProblems withtheRemote Control If the projector doesnotrespond toremote controlcommands, trythe following solutions: • Check thattheremote controlbatteries areinstalled correctly andhave power. Ifnecessary, replace the batteries. • Make sureyouareoperating theremote controlwithinthereception angleandrange ofthe projector. • Make suretheprojector isnot warming uporshutting down. • Check tosee ifa button onthe remote controlisstuck down, causing itto enter sleep mode. Release the button towake theremote controlup. • Strong fluorescent lighting,directsunlight, orinfrared devicesignals maybeinterfering withthe projectors remotereceivers. Dimthelights ormove theprojector awayfromthesun orinterfering equipment. • Ifavailable, turnoffone ofthe remote receivers inthe projectors menusystem, orcheck ifall the remote receivers wereturned off. • Ifyou assigned anIDnumber tothe remote controltooperate multiple projectors, youmay need to check orchange theIDsetting (feature notavailable withallprojectors). • Ifyou lose theremote control, youcanorder another onefrom Epson. Parent topic:Solving Projector orRemote ControlOperation Problems 127
Related references Remote ControlOperation Projector FeatureSettings -Settings Menu Where toGet Help Related tasks Replacing theRemote ControlBatteries Solutions toPassword Problems If you cannot enterorremember apassword, trythe following solutions: • You may have turned onpassword protection withoutfirstsetting apassword. Tryentering 0000using the remote control. • Ifyou have entered anincorrect password toomany timesandseeamessage displaying arequest code, writedown thecode andcontact Epson.Provide therequest codeandproof ofownership for assistance inunlocking theprojector. • Ifyou lose theremote controlyoucannot enterapassword. Orderanew onefrom Epson. Parent topic:Solving Projector orRemote ControlOperation Problems Related references Where toGet Help Where toGet Help If you need tocontact Epsonfortechnical supportservices, usethefollowing supportoptions. Internet Support Visit Epsons supportwebsite atwww.epson.com/support (U.S.)orwww.epson.ca/support (Canada)for solutions tocommon problems withyour projector. Youcandownload utilitiesanddocumentation, get FAQs andtroubleshooting advice,ore-mail Epson withyour questions. Speak toaSupport Representative To use theEpson PrivateLine Supportservice,call(800) 637-7661. Thisservice isavailable forthe duration ofyour warranty period.Youmay alsospeak withaprojector supportspecialist bydialing (562) 276-4394 (U.S.)or(905) 709-3839 (Canada). Support hoursare6AM to8PM, Pacific Time,Monday throughFridayand7AM to4PM, Pacific Time, Saturday. 128
Days andhours ofsupport aresubject tochange withoutnotice.Tollorlong distance chargesmay apply. Before youcall, have thefollowing information ready: • Product name • Product serialnumber (located onthe bottom orrear ofthe projector, orinmenu system) • Proof ofpurchase (suchasastore receipt) anddate ofpurchase • Computer orvideo configuration • Description ofthe problem Purchase SuppliesandAccessories You canpurchase screens,otheroptional accessories, andreplacement partsfromanEpson authorized reseller. Tofind thenearest reseller, call800-GO-EPSON (800-463-7766).Oryou canpurchase online at www.epsonstore.com (U.S.sales) orwww.epson.ca (Canadiansales). To purchase areplacement remotecontrol, call(562) 276-4394 (U.S.)or(905) 709-3839 (fordealer referral inCanada). Parent topic:Solving Problems Related tasks Using theProjector HelpDisplays 129
Technical Specifications These sections listthe technical specifications ofyour projector. General Projector Specifications Projector LampSpecifications Remote ControlSpecifications Projector Dimension Specifications Projector Electrical Specifications Projector Environmental Specifications Projector SafetyandApprovals Specifications Supported VideoDisplay Formats USB Display System Requirements General Projector Specifications Type ofdisplay Poly-silicon TFTactive matrix Resolution 1280 ×800 pixels (WXGA) Lens F=1.58 to1.72 Focal length: 16.9to20.28 mm Color reproduction Full color, 16.77 million colors Brightness Normal PowerConsumption mode: White lightoutput 3000lumens (ISO21118 standard) Color lightoutput 3000lumens ECO Power Consumption mode: White lightoutput 2400lumens (ISO21118 standard) Contrast ratio 2D mode: Up to5000:1 withNormal PowerConsumption mode 3D mode: Up to3000:1 withNormal PowerConsumption mode Image size 29 inches (0.74m)to320 inches (8.13m) 130