Epson Projector PowerLite Pro Z11005NL User Manual
Have a look at the manual Epson Projector PowerLite Pro Z11005NL User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Input Signal Settings -Signal Menu Normally theprojector detectsandoptimizes theinput signal settings automatically. Ifyou need to customize thesettings, youcanusetheSignal menu.Theavailable settingsdependonthe currently selected inputsource. Note: Youcanrestore thedefault settings ofthe Position ,Tracking ,and Sync settings bypressing the Auto button onthe remote control. To change settings foraninput source, makesurethesource isconnected andselect thatsource. Setting Options Description 3D Setup On Enables passive3Dimages when projecting from2projectors Off Auto Setup On Automatically optimizesimage quality fromananalog RGB Off computer connection (whenOn) 161
Setting Options Description Resolution Auto Sets theinput signal resolution from ananalog RGBcomputer Normal connection Wide Auto :detects theresolution Manual automatically Normal :for 4:3 or5:4 screens Wide :for widescreen Manual :lets you specify a resolution Tracking Varying levelsavailable Adjusts signaltoeliminate vertical stripesinimages froman analog RGBcomputer connection Sync. Varying levelsavailable Adjusts signaltoeliminate fuzziness orflickering inimages from ananalog RGBcomputer connection Position Up, down, left,right Adjusts theimage location onthe screen Progressive Off Sets whether toconvert interlaced-to-progressive signals Video for certain videoimage types Film/Auto Off :for fast-moving videoimages Video :for most video images Film/Auto :for movies, computer graphics, andanimation Frame Interpolation Off Smooths fastmoving videoby comparing consecutive frames (PowerLite Pro Low and inserting anintermediate Z9750UNL/Z9870UNL/ Normal frame between them Z10000UNL/Z10005UNL) High 162
Setting Options Description Super-resolution Varying levelsavailable Reduces edgeblurring thatmay occur whenimage isscaled upto fit the resolution ofthe image signal Noise Reduction Off Reduces flickeringinanalog images intwo levels NR1 NR2 Mosquito NR On Reduces thenoise orartifacts seen around theedges ofobjects Off that iscaused bythe decompression ofMPEG video Video Range Auto Sets thevideo range tomatch the setting ofthe device Normal connected tothe HDMI , Expanded HDBaseT ,and SDI (PowerLite Pro Z9870UNL/Z10000UNL/ Z10005UNL) inputports Input Signal Auto Specifies thesignal typefrom input sources connected to RGB computer ports Component Auto :detects signals automatically RGB :corrects colorfor computer/RGB videoinputs Component :corrects colorfor component videoinputs Video Signal Auto Specifies thesignal typefrom the input sources connected tothe Various videostandards video ports Auto :detects signals automatically 163
Setting Options Description Aspect See thelistofavailable aspect Sets theaspect ratio(width-to- ratios height ratio)forthe selected input source Scale Various scaleoptions When usingmultiple projectors to project oneimage, adjusts the scale ofthe image displayed by each projector Overscan Auto Changes theprojected image ratio tomake theedges visible by Off a selectable percentage or 4% automatically 8% Image Processing Fast Adjusts howimages are processed Fine Fast :displays imagesquicker Fine :displays imagesinhigher quality Parent topic:Adjusting theMenu Settings Related references Available ImageAspect Ratios 164
Projector FeatureSettings -Settings Menu Options onthe Settings menuletyou customize variousprojector features. 165
Setting Options Description Geometric Correction Off Adjusts theprojected image shape H/V-Keystone H/V Keystone :lets you manually Quick Corner correct theangles ofthe Curved Surface horizontal andvertical sides Point Correction Quick Corner :select toadjust the position ofthe four corners Corner Wall Curved Surface:select toadjust the image whenprojecting ona curved surface Point Correction :select to display agrid and finely adjust the image position Corner Wall:select toadjust the image whenprojecting ona surface witharight angle Split Screen — Divides theviewing area horizontally anddisplays two images side-by-side; whilein Split Screen mode,pressMenu to display theSplit Screen options orEsc tocancel split screen display Control PanelLock Full Lock Controls projector buttonlocking to secure theprojector Partial Lock Full Lock :locks allbuttons Off Partial Lock:locks allbuttons except thepower button Off :no buttons locked Lens Operation Lock On Locks theLens Shift,Zoom ,and Focus buttons onthe remote Off control 166
Setting Options Description Power Consumption Normal Selects thebrightness modeof the projector lamp Temp Interlock Normal :sets maximum lamp ECO brightness Temp Interlock :automatically dims thelamp ifthe surrounding temperature istoo high for normal operation ECO :reduces lampbrightness and fannoise, andsaves power and lamp life Remote Receiver Front/Rear Limits reception ofremote control signals bythe selected receiver; Front Off turns offallreceivers Rear Off User Button User Button 1 Assigns amenu option tothe User1 ,User2 ,and User3 User Button 2 buttons onthe remote controlfor User Button 3 one-touch access Test Pattern — Displays atest pattern toassist in adjusting theimage; pressthe left orright arrow buttons onthe remote controlorEnter onthe control paneltocycle through the available testpatterns, orEsc to cancel pattern display Memory Load Memory Save customized setsofsettings to memory Save Memory Erase Memory Rename Memory Parent topic:Adjusting theMenu Settings 167
Projector SetupSettings -Extended Menu Settings onthe Extended menuletyou customize variousprojector setupfeatures thatcontrol its operation. Setting Options Description Display — See theDisplay settings tablein this topic Closed Caption Off Controls useofclosed captions and selects theclosed caption CC1 type (closed captions areonly CC2 visible forNTSC signals connected throughtheS-Video or Video ports) Users Logo — Creates ascreen thatthe projector displaystoidentify itself and enhance security 168
Setting Options Description Projection Front Selects theway theprojector faces thescreen sothe image is Front/Upside Down oriented correctly Rear Rear/Upside Down Direction Varying levelsavailable Selects theinstallation anglefor the projector; theprojectors fan may getlouder depending onthe direction angleselected Operation — See theOperation settingstable in this topic A/V Settings A/V Output Selects variousaudioandvideo output settings Monitor Out A/V Output :select tooutput audio andvideo toan external device whentheprojector isin standby mode(Standby Mode must beset toCommunication On touse thissetting) Monitor Out:select theimage source tooutput toan external device whentheprojector isin standby mode;whensettoAuto , an analog RGBsignal fromthe Computer orBNC ports isoutput depending onwhich source was selected whentheprojector went into standby mode 169
Setting Options Description Standby Mode Communication On Enable thissetting toallow the following operations tooccur Communication Off when theprojector isin standby mode: • Monitor andcontrol the projector overanetwork • Output audioandvideo toan external device(A/VOutput must beset toAlways On) • Communication fromthe HDBaseT port HDBaseT Control Communications Selects thecommunication settings whenyouconnect the Extron XTP projector toan HDBaseT Transmitter orswitcher Control Communications : enables ordisables communication fromtheEthernet and serial portsonthe HDBaseT transmitter; alsodisables the projectors LAN,RS-232C ,and Remote ports Extron XTP:set toOn when you connect theExtron XTP transmitter orswitcher tothe HDBaseT port Multi-Projection — See theMulti-Projection settings table inthis topic Lamp Select Dual Select thelamps tobe turned on Single Lamp1 Lamp 2 170