Epson Projector PowerLite Pro Z11005NL User Manual

Turning
Offthe Projector
 Before
turning offthe projector, shutdown anycomputer connected toitso you canseethecomputer
 display
duringshutdown.
 Note:
Turnoffthis product whennotinuse toprolong thelifeofthe projector. Lamplifewill vary
 depending
uponmode selected, environmental conditions,andusage. Brightness decreasesovertime.
 1.
Press theStandby buttononthe projector orremote control.
 2.
Ifyou seeashutdown confirmation screen,presstheStandby buttononthe projector orremote
 control
again.(Toleave...

3.
Select theExtended menuandpress Enter.
 4.
Select theLanguage settingandpress Enter.
 5.
Select thelanguage youwant touse and press Enter.
 6.
Press Menu orEsc toexit themenus.
 Parent
topic:UsingBasicProjector Features
 Setting
theScreen Type
 You
canusetheScreen Typesetting tomatch theaspect ratioofthe displayed imagetothe screen you
 are
using.
 1.
Turn onthe projector anddisplay animage.
 2.
Press theMenu button.
 3.
Select theExtended menuandpress Enter.
 4.
Select Display >Screen >Screen...

You
seethisscreen:
 5.
Select yourscreens aspectratioandpress Enter.
 6.
Press theMenu button toaccept thechanges.
 Note:
Adjust theaspect ratioforthe projected image.
 Parent
topic:UsingBasicProjector Features
 Related
concepts
 Image
Aspect Ratio
 Adjusting
theImage Position UsingLensShift
 If
you cannot installtheprojector directlyinfront ofthe screen, youcanadjust theposition ofthe
 projected
imageusingthelens shiftfeature.
 Note:
Wait30minutes afterturning onthe projector beforesetting thefocus,...

3.
Press thearrow buttons toadjust theposition ofthe projected imageasnecessary.
 PowerLite
ProZ9870NL/Z11005NL
 1
 Center
oflens
 2
 Projected
imagewhenlensshiftisset inthe center
 3
 Maximum
verticalrange(V×56%)
 4
 Maximum
horizontal range(H×19%)
 Note:
Youcannot movetheimage toboth thehorizontal andvertical maximum values.
 84  

PowerLite
Pro
 Z9800WNL/Z9900WNL/Z11000WNL/Z9750UNL/Z9870UNL/Z10000UNL/Z10005UNL

1
 Center
oflens
 2
 Projected
imagewhenlensshiftisset inthe center
 3
 Maximum
verticalrange(V×60%)
 4
 Maximum
horizontal range(H×18%)
 Note:
Youcannot movetheimage toboth thehorizontal andvertical maximum values.
 4.
When youarefinished, presstheEsc button onthe control panelorremote control.
 Note:
When adjusting theimage height, position theimage lowerthanwhere youwant itto be and then
 move
itup. This willhelp...

2.
Press theMenu button.
 3.
Select theExtended menuandpress Enter.
 4.
Select Display >Screen >Screen Position .
 5.
Use thearrow buttons onthe remote controlorprojector toadjust theposition ofthe image.
 6.
When youarefinished, presstheMenu button.
 Note:
Youcannot adjustthescreen position ifthe Screen Typeisset to16:10 forthe PowerLite Pro
 Z9800WNL,
Z9900WNL,Z11000WNL, Z9750UNL,Z9870UNL,Z10000UNL, orZ10005UNL models,or
 4:3
forthe PowerLite ProZ9870NL andZ11005NL models.
 Parent...

3.
Press theleftorright arrow buttons onthe remote controlorpress Enter onthe control panelto
 cycle
through theavailable testpatterns.
 4.
Adjust theimage asnecessary.
 5.
Press theEsc toexit thetest pattern.
 Adjustable
SettingsUsingaTest Pattern
 Parent
topic:UsingBasicProjector Features
 Related
tasks
 Setting
theScreen Type
 Adjustable
SettingsUsingaTest Pattern
 You
canmake thefollowing imageadjustments whilethetest pattern isdisplayed.
 87  

Menu
 Settings

Image
 Color
Mode
 Color
Temp.
 Advanced

•
Gamma 1
 •
RGB
 •
RGBCMY
 Reset

Signal
 Auto
Setup
 Settings
 Geometric
Correction
 Extended
 Multi-Projection
2
 1
Except forcustom Gamma settings
 2
Except forBlack Levelsetting
 Parent
topic:Displaying aTest Pattern
 Adjusting
theImage Height
 If
you areprojecting fromatable orother flatsurface, andtheimage istoo high orlow, youcanadjust
 the
image heightusingtheprojectors adjustablefeet.
 1.
Turn onthe projector anddisplay animage.
 2....

If
the projected imageisunevenly rectangular, youneed toadjust theimage shape.
 Parent
topic:UsingBasicProjector Features
 Related
concepts
 Image
Shape
 Related
references
 Projector
FeatureSettings -Settings Menu
 Image
Shape
 You
canproject anevenly rectangular imagebyplacing theprojector directlyinfront ofthe center ofthe
 screen
andkeeping itlevel. Ifyou place theprojector atan angle tothe screen, ortilted upordown, oroff
 to
the side, youmay need tocorrect theimage shape forthe best display...

3.
Select theSettings menuandpress Enter.
 4.
Select theGeometric Correction settingandpress Enter.
 5.
Select theH/V-Keystone settingandpress Enter.Then press Enter again.
 You
seetheH/V-Keystone adjustmentscreen:
 6.
Use thearrow buttons onthe projector orthe remote controltoselect between verticaland
 horizontal
keystonecorrection andtoadjust theimage shape asnecessary.
 7.
When youarefinished, pressEsc.
 After
correction, yourimage isslightly smaller.
 Parent
topic:Image Shape
 90