Epson Projector PowerLite Pro Z11005NL User Manual

Related
references
 Projector
FeatureSettings -Settings Menu
 Related
tasks
 Displaying
aTest Pattern
 Correcting
ImageShape withQuick Corner
 You
canusetheprojectors QuickCorner settingtocorrect theshape andsize ofan image thatis
 unevenly
rectangular onallsides.
 1.
Turn onthe projector anddisplay animage.
 Note:
Youcandisplay apattern toaid inadjusting theprojected imageusingtheSettings menu.
 2.
Press theMenu button.
 3.
Select theSettings menuandpress Enter.
 4.
Select theGeometric Correction...

You
seetheQuick Corner adjustment screen:
 6.
Use thearrow buttons onthe projector orthe remote controltoselect thecorner ofthe image you
 want
toadjust. Thenpress Enter.
 7.
Press thearrow buttons toadjust theimage shape asnecessary.
 8.
When youarefinished, pressEsc.
 Parent
topic:Image Shape
 Related
references
 Projector
FeatureSettings -Settings Menu
 Related
tasks
 Displaying
aTest Pattern
 Correcting
ImageShape withCurved Surface
 You
canusetheprojectors CurvedSurface settingtoadjust theshape...

1.
Turn onthe projector anddisplay animage.
 Note:
Youcandisplay apattern toaid inadjusting theprojected imageusingtheSettings menu.
 2.
Press theMenu button.
 3.
Select theSettings menuandpress Enter.
 4.
Select theGeometric Correction settingandpress Enter.
 5.
Select theCurved Surface settingandpress Enter.
 Note:
Ifyou seeaconfirmation message,pressEnter.
 You
seethisscreen:
 93 

6.
Select theCorrect Shapesettingandpress Enter.
 7.
Use thearrow buttons onthe projector orthe remote controltoselect thearea youwant toadjust.
 Then
press Enter.
 Note:
Toreset yourCurved Surface adjustments, presstheEsc button foratleast 2seconds to
 display
areset screen, andselect Yes.
 8.
Use thearrow buttons onthe projector toadjust theimage shape.
 Note:
Ifthe adjustment triangleturnsgray,youcannot adjusttheshape anyfurther inthat direction.
 94  

9.
Press theEsc button toreturn tothe Curved Surface menuscreen.
 10.
Repeat theprevious threesteps asnecessary toadjust otherimage areas.
 If
the image expands orcontracts, continuewiththenext steptoadjust thelinearity.
 11.
Select oneofthe following fromtheCurved Surface menuscreen:
 •
Horizontal Linearity:Adjusts horizontal expansion orcontraction.
 •
Vertical Linearity :Adjusts verticalexpansion orcontraction.
 12.
Select adisplayed linetouse asabaseline andpress Enter.
 The
selected baseline...

Related
references
 Projector
FeatureSettings -Settings Menu
 Related
tasks
 Displaying
aTest Pattern
 Correcting
ImageShape withPoint Correction
 Correcting
ImageShape withPoint Correction
 You
canusetheprojectors PointCorrection featuretofine-tune theimage shape usingpoints onagrid.
 1.
Press theMenu button.
 2.
Select theSettings menuandpress Enter.
 3.
Select theGeometric Correction settingandpress Enter.
 4.
Select thePoint Correction settingandpress Enter.
 Note:
Ifyou seeaconfirmation...

The
boxchanges fromasingle linetoadouble-lined square.
 8.
Use thearrow buttons tocorrect theimage shape inall necessary directions.
 Note:
Youcanpress Enter toshow orhide theimage andgridtocheck theresults.
 9.
Press Esctoreturn tothe previous screenandselect another pointtocorrect, ifnecessary.
 10.
When youarefinished, pressMenu.
 Parent
topic:Image Shape
 Related
references
 Projector
FeatureSettings -Settings Menu
 Related
tasks
 Displaying
aTest Pattern
 97   

Correcting
ImageShape withCorner Wall
 You
canusetheprojectors CornerWallsetting toadjust theshape ofan image projected onasurface
 with
right angles, suchasarectangular pillarorthe corner ofaroom.
 Note:
Afterperforming thesesteps, theimage maynotbeevenly focused throughout.
 1.
Turn onthe projector anddisplay animage.
 Note:
Youcandisplay apattern toaid inadjusting theprojected imageusingtheSettings menu.
 2.
Press theMenu button.
 3.
Select theSettings menuandpress Enter.
 4.
Select theGeometric...

You
seethisscreen:
 6.
Select theCorner Typesetting andpress Enter.
 7.
Select oneofthe following:
 •
Horizontal Cornerwhenthesurfaces lineuphorizontally
 •
Vertical Cornerwhenthesurfaces lineupvertically
 8.
Press theEsc button toreturn tothe Corner Wallmenu screen.
 9.
Select theCorrect Shapesettingandpress Enter.
 99   

10.
Adjust theprojectors positionandusethelens shiftoption tocenter theimage overthepoint where
 the
two surfaces meet.(Therestofthese stepsshowHorizontal Cornerasthe selected CornerType
 but
thesteps arethesame forVertical Corner.)
 Note:
Youcanpress Enter toshow orhide theimage andgridtocheck theresults.
 11.
Use thearrow buttons onthe projector orthe remote controltoselect thearea youwant toadjust.
 Then
press Enter.
 100